So I have setup T-replication from Publisher (SQL Server 2014) Distributor (SQL Server 2014) Subscriber (SQL Server 2008 R2) and initialized it using a snapshot.
Checking in the replication monitor I find that the Snapshot agent has completed successfully and Log Reader agent is running.
Now in 'Distributor to Subscriber History' tab just beside the 'Undistributed Commands' Tab
I get the following error:
The process could not bulk copy into table '"dbo"."BEAMDATA"'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20037)
Get help: http://help/MSSQL_REPL20037
End of file reached, terminator missing or field data incomplete
To obtain an error file with details on the errors encountered when initializing the subscribing table, execute the bcp command that appears below. Consult the BOL for more information on the bcp utility and its supported options. (Source: MSSQLServer, Error number: 20253)
Get help: http://help/20253
bcp "LOWIS_BUCT"."dbo"."BEAMDATA" in "C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\ReplData\unc\LOWISBUCT_CSSQLDB_BUCT_CSSQLDB_BUCT_ALL_TABLES\20160826064516\BEAMDATA_34#1.bcp" -e "errorfile" -t"\n\n" -r"\n<,#g>\n" -m10000 -SLOWISTSTSQL -T -w (Source: MSSQLServer, Error number: 20253)
Get help: http://help/20253
I thought this could be some kind of data overflow and hence checked the schema of the table at both Publisher and Distributor and they match exactly.
I cleaned the whole replication setup completely and re did it but still stuck at the very same place for the same table.
Has anyone encountered this before? Ask me if you need more information from my end which I can furnish.
I found the reason for this. It was due to the schema mismatch at the publisher and subscriber.
In the said table, column had the datatype (date(datetime) and when replication scripted the schema for this table it was scripted as date hence at subscriber when the snapshot was applied, the field had the data type of date.
When data was being copied from datetime to date field it resulted in the said error.
I did the necessary changes in the data type at the subscriber end and things got fixed,
I had a similar error and Problem "sql replication repl20037 field size too large". What i found is this. I setup the subscription with my local Sql Management Studio v18.10 on a SQL Server 12.0. This caused the the Bulk copy problem and a field mismatch. Solution: setting up the Publication directly on the Mgmt Studio on the source server and setting up the subscription directly on the Mgmt Studio on the destination server.
Related
I am trying to diagnose an issue with SQL Server 2016 that occurred after some software was updated and I wanted to see if any of the server configurations changed. I have a backup of the master db and I figured I could compare settings between the live master and the backup. I read that "network packet size (B)" could cause "Protocol error in TDS stream" and I know how to look up the configuration using sp_configure but how can I look it up in the "master" backup?
The only way to do that is to copy regularly some views from master database (in fact mssqlsystemresources db) into a newly designed database and compare it.
Everytime you will query sys.configurations, the data will be retrieved from the actual system database...
I am trying to convert and migrate an Oracle schema to MSSQL server. At the last step, migrating data, I get the error message:
The table [MYDATABASE].[MYSCHEMA].MYTABLE] doesnot exist in target. You must first convert the table then load it into the database.
This error message appears for each table in my schema.
Can someone explain what is happening and what I need to do to get past this?
Are you tries to migrate the data before doing the ‘synchronize with the database’ operation?
If Yes,
This error message generally occurs when the target table doesn’t
exist on SQL server database. After converting schema, you need to
synchronize the table with the database before migrating the data.
To do this you right click on the SQL Server database in Metadata
explorer and click “Synchronize with database” menu.
Note: Table structure will not be created in the SQL server database until you synchronize.
This is the scenario:
I am testing redundancy and fail over in my dev machine by creating two SQL Servers.
I have created two SQL Servers. One with an extra instance:
-SQL1 : primary server
-SQL2 : mirror server
-SQL2\wtn : witness instance
First I made a full backup of the database and transaction log in my primary server, then I restored the database and transaction log file.
I used option "Restore with no recovery".
In the database node "restoring" is being shown. I believe this is normal when you would like to keep pulling data.
Then in the primary server, I tried to create mirroring on the database. After the wizard completed, I clicked on start Mirroring, but now I am getting the following error:
An error occurred while starting mirroring.
------------------------------
ADDITIONAL INFORMATION:
Alter failed for Database 'WSS_Content_1'. (Microsoft.SqlServer.Smo)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Database 'wss_content_1' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927)
I see there is another post here on stack overflow, but that does not have much information. I have been waiting more than 10 minutes.
Update
I am using SQL Enterprise 2016 by the way. Perhaps there is a difference in 2016 version.
I was watching this youtube video and my steps were exactly as this guy's.
Update 2:
I followed this as well but did not help.
How to: Prepare a Mirror Database for Mirroring (Transact-SQL)
I try to debug a problem related to tfs report,I don't know why and really need help.
Recently I export one report from the old tfs server and deploy to the new server, I also copy the store procedures which related to this report in the old server database to the new server database.
But the report just doesn't work. The error is as following, The report rdl file and store processors in new tfs server are exactly same like the old server, just didn't work for the new one.
An error occurred during client rendering.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet1'.
(rsErrorExecutingCommand) Query (1, 16) Parser: The syntax for
'#TFS_Date' is incorrect.
First of all, I would suggest you to check your reporting service log files from below path,
C:\Program Files\Microsoft SQL Server\MSRS11.SQLEXPRESS\Reporting Services\LogFiles
Usually the error messages here in log file shows us a perfect solution.
In your case, try to check that user has access to dataset1's database. (server database) by going to SQL Server Security tabs.
Also, check your store procedure. If you have joined with some other database's table then user must have access of that database too.
Note: This type of error messages you can find there in log file. So read it to solve the issue.
I have created an SSIS package that pulls the data from Oracle 10g server and pushes them in SQL Server 2008. I have date datatype field in Oracle named admission_date.
Below is my query in Oracle.
select pt_id,admission_date
from stays
It works fine.
When I tried to pull the data in SQL Server through ADO.net via an SSIS package. I get the below error messages.
Error: 0xC02090F5 at STAYS, ADO NET Source [1050]: The component "ADO
NET Source" (1050) was unable to process the data. ORA-01843: not a
valid month
Error: 0xC0047038 at STAYS, SSIS.Pipeline: SSIS Error Code
DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "ADO NET
Source" (1050) returned error code 0xC02090F5. The component returned
a failure code when the pipeline engine called PrimeOutput(). The
meaning of the failure code is defined by the component, but the error
is fatal and the pipeline stopped executing. There may be error
messages posted before this with more information about the failure.
Any input on this would helpful.
Use something like this TO_CHAR(addmission_date,'yyyy-mm-dd HH24:MI:SS') to format your oracle date into a format that SQL likes.
Also be aware that Oracle has a much larger valid date range than SQL so depending upon your Oracle data you may have valid oracle dates that don't come across as valid SQL dates.
See Dealing With Timestamp/Datetime when copying from Oracle to Sql Server using SSIS
And Oracle to SQL2005 DATETIME field overflows in SSIS
Well, the issue was the Oracle table was a view and not a table , the admission_date was extracted from the decode command for SQL. I pulled as it is and it is resolved my issue.