This is my first time on here. I am having an issue deploying a java application I made on myEclipse. I am using Filezilla to host my Wildfly 9.0.2 test server. I exported my project to a .war file and upon dragging it into the test server I am met with a deployment.failed. Upon viewing the file in Notepad it declares "Services with missing/unavailable dependencies". one such error can be seen below:
[ "jboss.naming.context.java.module.myproject.myproject.env.common.jdbc.database_connection is missing [jboss.naming.context.java.database.connection] "
There are five of these similar errors and all point to a diffferent database connection of some type that I am not using within my project. I understand the issue but I do not know where these dependencies are declared and how I can go about removing them.
Any help will be greatly appreciated.
Kind Regards,
Paul
Creating the WAR file will use the project's deployment assembly (assuming you're using MyEclipse 2013 or later). Right click on the project and select Properties. Then go to the MyEclipse/Deployment Assembly page. This will have all of the files that are added to the deployment (or to the WAR file).
However, the message seems to suggest that a project is using a database connection which can't be found when running on the server. A first thought was that you're using the inbuilt Derby database but don't have that running when you run on Wildfly.But you say that you're not using a database. Also, I'm not familiar with how Filezilla can host a J2EE server - I thought Filezilla was an FTP client and server solution. Perhaps you could give more details, if this answer doesn't help.
Related
When I build an SSIS project in Azure DevOps I get the following error:
System.ArgumentException: Value does not fall within the expected
range. at
Microsoft.SqlServer.Dts.Runtime.Interop.ProjectInterop.ReferencePackage(Package
package, String packageLocation) at
Microsoft.SqlServer.Dts.Runtime.PackageItem.Load(IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.PackageItem.get_Package() at
Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.IncrementalBuildThroughObj(IOutputWindow
outputWindow) at
Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.BuildIncremental(IOutputWindow
outputWindow)
It's not obvious to me which value this is that is not falling within the expected range, and it seems like I can't get any more detailed information from Azure DevOps. The project builds successfully locally.
I'm using the SSIS Build & Deploy component to build the project . I've also tried to use devenv.com via Command Prompt to build it, with the same results.
Do you know what this could be or at least how I can access more helpful logs?
And a side question: The project, that builds in few seconds locally, is taking from 12 - 25 minutes to build in Azure DevOps. Do you know why that is?
Thanks in advance!
I am not saying this the answer to the question, however I am adding my experience so that it might help someone else.
I had similar issue today morning. At least, the error was exactly the same.
I had a SQL Server connection which was not accessible due to network issue. After fixing the network issue the problem got resolved.
(I also had converted sql connection from package level to project level. I removed that and reconverted to project level. Not sure if had anything to do the resolution of the issue)
I have written a VB.Net application that uses an SQL Express DB file containing a single table and a handful of stored procedures.
I have successfully built and exported the application to my VPS.
The problem comes when knowing what to do concerning the database file, there is a wealth of stuff online but not specifically to suit my needs.
I plan to use LocalDB on the VPS but being commandline - it is hard to know if the scripts that I have run have been successful after creating an instance , starting it... etc,
I want to keep installation requirements to an absolute minimum on my VPS machine and (in time other end users machines)... hence using LocalDB and not SQL Express
So, what do I have to do on the VPS to enable my application to connect to the database.. ? This was simple when it was Access - (supply the MDB file and run the AccessDatabaseEngine(redistributable) - job done)
The connection on my devt. machine runs as expected.
The connection string in my code is:
Const strSQLConnection As String = "Data Source= (localdb)\v11.0;Database=SoccerTrader;Trusted_Connection=True"
Can anyone help please.. this is driving me around the bend.. surely it cant be that difficult..?
===========================
I have found the following in an MSDN blog which says:
Database as a File: LocalDB connection strings support AttachDbFileName property that allows attaching a database file during the connection process. This lets developers work directly with databases instead of the database server. Assuming a database file (*.MDF file with the corresponding *.LDF file) is stored at “C:\MyData\Database1.mdf” the developer can start working with it by simply using the following connection string: “Data Source=(localdb)\v11.0;Integrated Security=true;AttachDbFileName=C:\MyData\Database1.mdf”.
================ ADDED 12th June =====================
OK, this is really bugging me now... I have read around this till it is coming out of my ears and nothing specifically seems to target what I am trying to do. All the blogs I read refer to installing / running SQL Server and changing permissions etc.
As I have mentioned I am using a VPS and propose to use LocalDB on the VPS to access a simple/small database file for a VB.Net application I am writing.
This is the story so far.
1) I have built a working prototype on my development PC and connected using SQL Express to a database file SoccerTrader.mdf - no problem.
In the Visual Studio Project properties I have added a requirement to the project that checks for SQL Server ..and if it is missing, installs it...
2) I install the project on the VPS and as expected SQL Server 2012 LocalDB is installed .... see here..
3) I have copied the SoccerTrader.MDF and SoccerTrader.LDF files into "C:\BESTBETSoftware\SoccerBot" on the VPS
4) for practical reasons given the problems I am having getting this to work, I have implemented an inputbox for me to specify the connection string when the application runs.... the connection strings I have used give the following...
1]: http://i.stack.imgur.com/i2tro.png
I have not changed any file permissions on the development PC and the database state is NOT read only....
So, the question is where do I go from here...? What have I missed.. why is it not working..?
I have managed to sort the problem.
Seemingly, the connection string I was using was OK. It was my error handling that wasnt 'clean' enough. It transpired the connection was being made on my VPS but when the application attempted to update the table , the directory I had created and put the MDF file into, would not permit write access.
I moved the MDF into the C:\Users\Public\Documents folder and all works as it should.
You have to specify the full path of the Db file with folder name/ip-address
An attempted deployment from (localhost) to (remote server) yielded the Error 27123 which, appears to be a credentials-related issue. After spending several hours the resolution appears to be one of assigning local-to-the-remote server Windows credentials that are used to launch DTEexec.exe. I am using VS2012 Ultimate locally with SQL Server 2014 Developer version and remote SQL version 2012 SP1. However, my attempts have failed so far.
I would VERY much like to be able to deploy to the remote server inside of VS2012, including creating folders, etc but am still at a loss as to the missing piece needed.
We do not have Active Directory set up as the remote is on the Amazon S3 cloud bit other than that is pretty much a plain vanilla setup. I also noted some folks suggested a Kerberos-based response but before I ask our network guru to proceed I'd like at least to get confirmation.
I AM able to manually FTP, install and run packages when remoted in but that stinks for my contractor who I would also like to be able to have me out of his way. s
All found online materials have not yet yielded the one last piece. I suspect my ignorance rather than the lack of a real solution and would appreciate any guidance.
Thanks in advance.
While configuring the SQL Server 2012 Master Data Services, I am having following problem
The required .svc handler mappings are not installed in IIS.
What I want to do is that, I want to query my database using a URL so that I can retrieve data directly using the URL it self just like we can store the querystring parameters into SQL Server
How do I deal with it, I followed several documents but not any ideas.
To fix this issue, open a command prompt and go to the .NET directory
(for example %windir%\Microsoft.NET\Framework64\v4.0.30319).
Run the command: aspnet_regiis –i
For further details check:SVC Handler mapping error in MDS Configuration Manager
I've come across these types of errors a few times when installing MDS, the problem usually comes about because just having IIS installed is not enough, there are loads of other role services and features that you need to enable and install as well which the setup program doesn't tell you about.
Thankfully they are all documented here:
Web Application Requirements (Master Data Services)
And, if you've missed any, you can go back, install them and then re-launch the configuration tool to complete the setup without having to re-install MDS from scratch.
I download jdeveloper studio edition and install it in C:\Oracle\Middleware
then I install weblogic instance using C:\Oracle\Middleware\wlserver_10.3\common\bin\config.exe
to C:\myproject\domains\myweblogic
Then download DMS_11.1.0.0.0_WINDOWS.zip and install it to C:\Oracle\Middleware\Mobile.
thereafter cant start
C:\Oracle\Middleware\Mobile\Mobile\Server\bin\runmobileserver.bat
unless i change the variable to this batch file
set DOMAIN_DIR=C:\myproject\domains\myweblogic
what do I do next to see that it works?
is there a simple example that creates a sigle table and synchronized between server and mobile clients?
very difficult to find information on this technology. interfere very popular tags (Oracle, Database).
If you install Database Mobile Server directly in the WebLogic directory, you will not need to edit the batch file. For instance, I believe the default install directory is:
C:\Oracle\Middleware\wlserver_10.3
So if you used the default install directory, you would install Database Mobile Server there, with no added 'Mobile' or other directory. If you chose to install WebLogic elsewhere, then replace the above with that directory.
There is another small issue to be aware of.
The installer will give you warning about installing in a non-empty
directory. You should click through the warning. This is a known issue
documented in the Release Notes.
Regarding your other question about a demo, there is a Java demo found in
<MOBILE_HOME>\Mobile\Server\demos\consolidator_api
You will need to download a client and perform a sync, which is documented here:
http://download.oracle.com/docs/cd/E22663_01/doc.11100/e22681/instsqlite.htm#BABGAACI
I hope that helps, good luck with your project. Let me know if you have further questions.
Eric Jensen, Oracle PM