An attempted deployment from (localhost) to (remote server) yielded the Error 27123 which, appears to be a credentials-related issue. After spending several hours the resolution appears to be one of assigning local-to-the-remote server Windows credentials that are used to launch DTEexec.exe. I am using VS2012 Ultimate locally with SQL Server 2014 Developer version and remote SQL version 2012 SP1. However, my attempts have failed so far.
I would VERY much like to be able to deploy to the remote server inside of VS2012, including creating folders, etc but am still at a loss as to the missing piece needed.
We do not have Active Directory set up as the remote is on the Amazon S3 cloud bit other than that is pretty much a plain vanilla setup. I also noted some folks suggested a Kerberos-based response but before I ask our network guru to proceed I'd like at least to get confirmation.
I AM able to manually FTP, install and run packages when remoted in but that stinks for my contractor who I would also like to be able to have me out of his way. s
All found online materials have not yet yielded the one last piece. I suspect my ignorance rather than the lack of a real solution and would appreciate any guidance.
Thanks in advance.
Related
When I build an SSIS project in Azure DevOps I get the following error:
System.ArgumentException: Value does not fall within the expected
range. at
Microsoft.SqlServer.Dts.Runtime.Interop.ProjectInterop.ReferencePackage(Package
package, String packageLocation) at
Microsoft.SqlServer.Dts.Runtime.PackageItem.Load(IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.PackageItem.get_Package() at
Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.IncrementalBuildThroughObj(IOutputWindow
outputWindow) at
Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.BuildIncremental(IOutputWindow
outputWindow)
It's not obvious to me which value this is that is not falling within the expected range, and it seems like I can't get any more detailed information from Azure DevOps. The project builds successfully locally.
I'm using the SSIS Build & Deploy component to build the project . I've also tried to use devenv.com via Command Prompt to build it, with the same results.
Do you know what this could be or at least how I can access more helpful logs?
And a side question: The project, that builds in few seconds locally, is taking from 12 - 25 minutes to build in Azure DevOps. Do you know why that is?
Thanks in advance!
I am not saying this the answer to the question, however I am adding my experience so that it might help someone else.
I had similar issue today morning. At least, the error was exactly the same.
I had a SQL Server connection which was not accessible due to network issue. After fixing the network issue the problem got resolved.
(I also had converted sql connection from package level to project level. I removed that and reconverted to project level. Not sure if had anything to do the resolution of the issue)
As a .NET Desktop developer, I have a lot of experience working with various databases that are already up and running; but I'm not a DBA. I'm currently working at a company where I am ther only software guy here to build them software from scratch -- their previous enterprise-level solution was an Access database with macros and a couple forms built it. So, I basically have no one else to go to.
With that preface, how the heck do I get a database -- ANY DATABASE!!! -- added to my VS solution? I've been beating my head against this for almost 6 hours and have made zero headway. At this point, I'm ready to say, "Screw MS databases!" and start looking at MySQL or PostgreSQL or something.
The desktop application I'm developing has to work whether there is an internet connection or not, so I need a local database that installs with ClickOnce. From what I've found so far:
SQL Server [Express] 2016+ requires Windows 8 or later (a non-starter since 95% our customers are still running Windows 7)
SQL Server Compact is being deprecated and won't work past VS2013
I think LocalDB is what replaces Compact in 2016+ (?)
Okay, so I started with this tutorial:https: //learn.microsoft.com/en-us/visualstudio/data-tools/create-a-sql-database-by-using-a-designer However, trying to add a "Service-based Database" just gives me this error once: "The 'DBProviderFactories' section can only appear once per config file." I try again and get this error repeatedly: "Unable to find DbProviderFactory for type System.Data.SqlClientConnection" I've Googled both errors and all the answers that I've been able to find pertain to VS2010 or earlier and their solutions are either not applicable or don't work.
Next, I tried this tutorial: https://msdn.microsoft.com/en-us/library/aa983322.aspx I've tried adding new data connections through the "Server Explorer" panel. I don't see "[*] Compact" as an option. When I try "Microsoft SQL Server Database File", I just get the error: Unable to find the requested .Net Framework Data Provider. It may not be installed."
I've even tried adding data sources through the "Data Sources" panel; that doesn't work either.
I've installed the "Data storage and development" addon from the Visual Studio Installer, several versions of SQL Server 2014, SQL Server Compact 4.0, and maybe a few other executables from Microsoft's website.
Nothing works.
Help...
I think I just found it!
Evidently, there are "machine.config" files on your computer. Search for them all, and make sure that there is only a single tag for "DbProviderFactories". I can add a database object now. Hopefully, this puts me in business...
https://social.msdn.microsoft.com/Forums/vstudio/en-US/7b4f353b-77fd-427c-976b-5968abc88c13/visual-studio-2010-unable-to-find-the-requested-net-framework-data-provider-for-sql?forum=vseditor
If what you are saying is that you are writing a browser based application - then one would migrate the tables to SQL Server (Express) or even MySQL - it really doesn't matter. Then write a new web app. The existing Access app would serve as a model for seeing features & screen layout but is otherwise not portable.
On the other hand, if you are re-writing a Windows application; then the decision is whether the payload requires a server solution or if one can stay at the PC level. If the payload is suitable for PC then a re-write using either Visual Studio or Access again.
Access is a front end db - the tables in the back end whether they be stored in SQL Server or an Access file are entirely passive. All the processing is done by the user's PC. If the payload allows that then this is the lowest cost re-write option.
If you've outgrown a PC level payload - then one must develop a back end database feature set with a more passive front end.
This is my first time on here. I am having an issue deploying a java application I made on myEclipse. I am using Filezilla to host my Wildfly 9.0.2 test server. I exported my project to a .war file and upon dragging it into the test server I am met with a deployment.failed. Upon viewing the file in Notepad it declares "Services with missing/unavailable dependencies". one such error can be seen below:
[ "jboss.naming.context.java.module.myproject.myproject.env.common.jdbc.database_connection is missing [jboss.naming.context.java.database.connection] "
There are five of these similar errors and all point to a diffferent database connection of some type that I am not using within my project. I understand the issue but I do not know where these dependencies are declared and how I can go about removing them.
Any help will be greatly appreciated.
Kind Regards,
Paul
Creating the WAR file will use the project's deployment assembly (assuming you're using MyEclipse 2013 or later). Right click on the project and select Properties. Then go to the MyEclipse/Deployment Assembly page. This will have all of the files that are added to the deployment (or to the WAR file).
However, the message seems to suggest that a project is using a database connection which can't be found when running on the server. A first thought was that you're using the inbuilt Derby database but don't have that running when you run on Wildfly.But you say that you're not using a database. Also, I'm not familiar with how Filezilla can host a J2EE server - I thought Filezilla was an FTP client and server solution. Perhaps you could give more details, if this answer doesn't help.
I recently moved several reports over to a new server. Everything works fine displaying tables and data, but charts are not displaying properly. It looks like the image is not rendering properly. My initial thought was that this was a permissions issue, specifically that the service account used to run SSRS needed permissions to a certain folder on the server that is used to generated chart images, but I can not find anything about this in searching for a solution.
This happens with old reports that display fine on the original server and new reports I try making on the new server.
EDIT: SSRS logs are showing a generic error in GDI+. Looks like this may be the issue, especially since this is running on a virtual server:
http://social.technet.microsoft.com/Forums/en-US/37ed20b2-99bc-4e36-a14b-c9f8cc297be3/ssrs-2012-reports-with-charts-generic-error-in-gdi-?forum=sqlreportingservices
I am curious about a point made in this question:
2) Ensure write permissions on the "folder to which SSRS caches the charts"
Well, firstly, I have not found a single article on the net as to
where this folder is; however, I tested this locally on the server
while logged in as Administrator with full privileges. This doesn't
seem to apply to my situation either.
Does anyone know about this folder? I would imagine that running while logged in as an admin would not mean anything since the service account running SSRS would need the correct privileges.
Someone had a similar problem and the solution was to repair the SQL Server installation. I know it is quite long to run but it might be worth a try.
Equivalent topic in SO
You can try restarting the report server. That worked in my case with Sharepoint and SQL Server 2012. Or repair the SQL server installation on the server as some posts suggest.
SSRS 2012 Charts Not Rendering
I had the same issue when deploying a new report locally.
I restarted my Report Server service and the reports rendered fine.
I have followed the instructions here.
To cut a long story short, I just cannot connect to:
https://machine/site/virtual directory/replisapi.dll?diag
I get:
HTTP Error 500.0 - Internal Server Error
Module IsapiModule
Notification ExecuteRequestHandler
Handler ISAPI-dll
Error Code 0x800700c1
Requested URL https://machine:443/site/virtual directory/replisapi.dll
Physical Path C:\inetpub\SQLReplication\replisapi.dll
Logon Method Basic
Logon User machine\user
When browsing to the DLL it does ask for my username and password then shows this error.
We're using a self signed certificate as this is just for testing.
I'm not really a server person so don't know what is going on? There's nothing in the event logs.
Does anyone have any bright ideas of things I could try?
P.S.
I also ran the wizard through SQL 2008 R2 which said it was successful (the wizard only works with IIS6) could there be a conflict between IIS6 and 7 now I have tried to set it up on both?
Ok, this was me being dumb.
After I retraced my steps backwards and unregistered replisapi.dll and moved into a backup directory.
I then removed my module mappings from IIS7.
I then ran the SQL wizard again, which copied replisapi.dll back to the directory.
I noticed it was a different size to the one I was using.
This was because I had got it from "Program Files" but being a 64bit machine the wizard got it from "Program Files(x86)" and now it works.
How simple yet frustrating!
I had to install the 32bit version of the DLL for this to work
I solved this (IIS8 and sql server 2008 x64) by entering ApplicationPool advanced settings and changing "Enable 32-bit Applications" to "True".
Hope this helps. This topic (web sync) is really bad documented