How can I insert characters in a file using C instead of overwriting? I also want to write in start of file and end of a file. I tried this method but it didn't work out (I can re-position but I cannot insert. The text is overwritten)
I've tried this, but it didn't work:
fword = fopen("wrote.txt", "rb+");
fseek(fword, 0, SEEK_SET);
fscanf(fword, "%c", &l);
To add text at the end, you can open the file with "a" mode (check the fopen manual). It will write your text to end.
To add text in other positions, you have to read everything after that to memory, write what you want and then write the rest.
Files are abstractions of byte streams, there is no such concept as insert in a byte stream, you can seek into certain place and write data there. The bytes you wrote will lay in the file as an array of bytes, if the writing exceeds the current file size, the file will be extended.
Related
Is it possible to write at the middle of a file for example I want to insert some string at the 5th position in the 2nd line of a file in c ?
I'm not very familiar with some of C functions that are related to handling files , if someone could help me I would appreciate it
I tried using fputs but I couldn't insert characters at the desired location
open a new output file
read the input file line by line (fgets) writing each line out to a new file as you read.
When you hit the place you want to insert write the new line(s)
The carry on copy the old lines to the new file
close input and output
rename output file to input
Continuing from my comments above. Here's what I'd do:
Create two large, static char[] buffers of the same size--each large enough to store the largest file you could possibly ever need to read in (ex: 10 MiB). Ex:
#define MAX_FILE_SIZE_10_MIB (10*1024*1024)
static char buffer_file_in[MAX_FILE_SIZE_10_MIB];
static char buffer_file_out[MAX_FILE_SIZE_10_MIB];
Use fopen(filename, "r+") to open the file as read/update. See: https://cplusplus.com/reference/cstdio/fopen/. Read the chars one-by-one using fgetc() (see my file_load() function for how to use fgetc()) into the first large char buffer you created, buffer_file_in. Continue until you've read the whole file into that buffer.
Find the location of the place you'd like to do the insertion. Note: you could do this live as you read the file into buffer_file_in the first time by counting newline chars ('\n') to see what line you are on. Copy chars from buffer_file_in to buffer_file_out up to that point. Now, write your new contents into buffer_file_out at that point. Then, finish copying the rest of buffer_file_in into buffer_file_out after your inserted chars.
Seek to the beginning of the file with fseek(file_pointer, 0, SEEK_SET);
Write the buffer_file_out buffer contents into the file with fwrite().
Close the file with fclose().
There are some optimizations you could do here, such as storing the index where you want to begin your insertion, and not copying the chars up to that point into buffer_file_in, but rather, simply copying the remaining of the file after that into buffer_file_in, and then seeking to that point later and writing only your new contents plus the rest of the file. This avoids unnecessarily rewriting the very beginning of the fie prior to the insertion point is all.
(Probably preferred) you could also just copy the file and the changes you insert straight into buffer_file_out in one shot, then write that back to the file starting at the beginning of the file. This would be very similar to #pm100's approach, except using 1 file + 1 buffer rather than 2 files.
Look for other optimizations and reductions of redundancy as applicable.
My approach above uses 1 file and 1 or 2 buffers in RAM, depending on implementation. #pm100's approach uses 2 files and 0 buffers in RAM (very similar to what my 1 file and 1 buffer approach would look like), depending on implementation. Both approaches are valid.
I made a C program that reads a string from a .txt file, then it encrypts the string, and finally it writes the string in the same file.
The thing is that if I use fopen("D:\\Prueba.txt","w+"), the program doesn't work, it prints garbage like this )PHI N.
I've debugged and I know the error is there in that line, because if I use fopen("D:\\Prueba.txt","r+"), the program works, and it writes what it should.
But I want to use w+ because it will rewrite what the .txt file had. Why is w+ not working?
If you're opening with w+ to first read the content, that's not going to work. From C11:
w+: truncate to zero length or create text file for update.
What's probably happening is that you read data from the now empty file but don't correctly check that it worked. That would explain the weird "content" you see of )PHI N.
One solution is to open the file as with r, open another file with w, and transfer the contents, encrypting them as part of that process. Then close both, delete the original, and rename the new one to the original name. This will allow you to process arbitrarily-sized files since you process them a bit at a time.
If you don't want to use a temporary file, and you're sure you can store the entire content in memory, you could open it r+, get the content, the reopen it with a new mode, such as with:
FILE *readFh = fopen( "myfile.txt", "r+");
// Read in content, massage as needed.
FILE *writeFh = frepoen( NULL, "w+", readFh);
// Provided that worked, you should now have an empty file to write to.
// Write back your massaged data.
I am currently writing a program in c that requires me to read a text file more than once. That is, I am reading the data from the first line of the text file (which is fine), but then want to go back and re-read the same data from the same first line of the text file again (my problem). The data on the text file are simple numbers spaced out such that they may be read with scanf. I am a beginner and would appreciate some help. If it is in fact not possible to do this using scanf what can I do in order to solve my problem?
you can use rewind(FILE *stream) it is equivalent to:
fseek(stream, 0, SEEK_SET)
which sets the file position indicator for the stream pointed to by stream to the beginning of the file
I need to add a string before the 45th byte in an existing file. I tried using fseek as shown below.
int main()
{
FILE *fp;
char str[] = "test";
fp = fopen(FILEPATH,"a");
fseek(fp,-45, SEEK_END);
fprintf(fp,"%s",str);
fclose(fp);
return(0);
}
I expected that this code will add "test" before the 45th char from EOF, instead, it just appends "test" to the EOF.
Please help me to find the solution.
This is continuation of my previous question
Append item to a file before last line in c
Open it with mode r+ (if it already exists) or a+ (if it doesn't exist and you want to create it). Since you're seeking to 45 bytes before the end of file, I'm assuming it already exists.
fp = fopen(FILEPATH,"r+");
The rest of your code is fine. Also note that this will not insert the text, but will overwrite whatever is currently at that position in the file.
ie, if your file looks like this:
xxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
Then after running this code, it will look like this:
xxxxxxxtestxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxx
If you really want to insert and not overwrite, then you need to read all the text from SEEK_END-45 to EOF into memory, write test and then write the text back
Don't open it as append (a) if you plan to write at arbitrary positions; it will force all writes to the end of the file. You can use r+ to read or write anywhere.
To avoid platform-specific configurations, always explicitely indicate the binary or text mode in your fopen() call.
This will save you hours of desperations if you port your code one day.
I have a small code block that should append text to the beg of a file. However it still only adds to the end of the file. I thought the rewind set the pointer to the front of the file, thus when I added the text using fprintf it should add to the front. How can I change this?
fp = fopen("Data.txt", "a");
rewind(fp);
fprintf(fp, "%s\n", text);
fclose(fp);
Text is a char array to be added at the front of the file
1) Don't open in append mode.
When you open in append mode, all writes go to the end of the file, regardless of the seek position.
http://www.opengroup.org/onlinepubs/009695399/functions/fopen.html
Opening a file with append mode (a as
the first character in the mode
argument) shall cause all subsequent
writes to the file to be forced to the
then current end-of-file, regardless
of intervening calls to fseek().
2) Opening without "a" still won't do what you want. It's not possible to insert into a file using the ANSI/POSIX file operations, because given the way most file systems store their data, insert is not a simple operation.
You need either to open a new file, write your new data, then append the old file afterwards, or else you need to mess around shuffling data forward in blocks. Either option is very inefficient for large files, compared with appending at the end, not to mention error-prone if you need the program or the machine to be able to unexpectedly die without corrupting data. So if this is a log file or similar, it's probably worth redesigning so that you can write new data to the end, and then reverse it all when you prepare a report from the log.
You can replace data in a file, but you can't prepend or insert it anywhere but at the very end of the file.
Just create a new file with your data and then append the old data in this file you created.