I have a small code block that should append text to the beg of a file. However it still only adds to the end of the file. I thought the rewind set the pointer to the front of the file, thus when I added the text using fprintf it should add to the front. How can I change this?
fp = fopen("Data.txt", "a");
rewind(fp);
fprintf(fp, "%s\n", text);
fclose(fp);
Text is a char array to be added at the front of the file
1) Don't open in append mode.
When you open in append mode, all writes go to the end of the file, regardless of the seek position.
http://www.opengroup.org/onlinepubs/009695399/functions/fopen.html
Opening a file with append mode (a as
the first character in the mode
argument) shall cause all subsequent
writes to the file to be forced to the
then current end-of-file, regardless
of intervening calls to fseek().
2) Opening without "a" still won't do what you want. It's not possible to insert into a file using the ANSI/POSIX file operations, because given the way most file systems store their data, insert is not a simple operation.
You need either to open a new file, write your new data, then append the old file afterwards, or else you need to mess around shuffling data forward in blocks. Either option is very inefficient for large files, compared with appending at the end, not to mention error-prone if you need the program or the machine to be able to unexpectedly die without corrupting data. So if this is a log file or similar, it's probably worth redesigning so that you can write new data to the end, and then reverse it all when you prepare a report from the log.
You can replace data in a file, but you can't prepend or insert it anywhere but at the very end of the file.
Just create a new file with your data and then append the old data in this file you created.
Related
Is it possible to write at the middle of a file for example I want to insert some string at the 5th position in the 2nd line of a file in c ?
I'm not very familiar with some of C functions that are related to handling files , if someone could help me I would appreciate it
I tried using fputs but I couldn't insert characters at the desired location
open a new output file
read the input file line by line (fgets) writing each line out to a new file as you read.
When you hit the place you want to insert write the new line(s)
The carry on copy the old lines to the new file
close input and output
rename output file to input
Continuing from my comments above. Here's what I'd do:
Create two large, static char[] buffers of the same size--each large enough to store the largest file you could possibly ever need to read in (ex: 10 MiB). Ex:
#define MAX_FILE_SIZE_10_MIB (10*1024*1024)
static char buffer_file_in[MAX_FILE_SIZE_10_MIB];
static char buffer_file_out[MAX_FILE_SIZE_10_MIB];
Use fopen(filename, "r+") to open the file as read/update. See: https://cplusplus.com/reference/cstdio/fopen/. Read the chars one-by-one using fgetc() (see my file_load() function for how to use fgetc()) into the first large char buffer you created, buffer_file_in. Continue until you've read the whole file into that buffer.
Find the location of the place you'd like to do the insertion. Note: you could do this live as you read the file into buffer_file_in the first time by counting newline chars ('\n') to see what line you are on. Copy chars from buffer_file_in to buffer_file_out up to that point. Now, write your new contents into buffer_file_out at that point. Then, finish copying the rest of buffer_file_in into buffer_file_out after your inserted chars.
Seek to the beginning of the file with fseek(file_pointer, 0, SEEK_SET);
Write the buffer_file_out buffer contents into the file with fwrite().
Close the file with fclose().
There are some optimizations you could do here, such as storing the index where you want to begin your insertion, and not copying the chars up to that point into buffer_file_in, but rather, simply copying the remaining of the file after that into buffer_file_in, and then seeking to that point later and writing only your new contents plus the rest of the file. This avoids unnecessarily rewriting the very beginning of the fie prior to the insertion point is all.
(Probably preferred) you could also just copy the file and the changes you insert straight into buffer_file_out in one shot, then write that back to the file starting at the beginning of the file. This would be very similar to #pm100's approach, except using 1 file + 1 buffer rather than 2 files.
Look for other optimizations and reductions of redundancy as applicable.
My approach above uses 1 file and 1 or 2 buffers in RAM, depending on implementation. #pm100's approach uses 2 files and 0 buffers in RAM (very similar to what my 1 file and 1 buffer approach would look like), depending on implementation. Both approaches are valid.
I made a C program that reads a string from a .txt file, then it encrypts the string, and finally it writes the string in the same file.
The thing is that if I use fopen("D:\\Prueba.txt","w+"), the program doesn't work, it prints garbage like this )PHI N.
I've debugged and I know the error is there in that line, because if I use fopen("D:\\Prueba.txt","r+"), the program works, and it writes what it should.
But I want to use w+ because it will rewrite what the .txt file had. Why is w+ not working?
If you're opening with w+ to first read the content, that's not going to work. From C11:
w+: truncate to zero length or create text file for update.
What's probably happening is that you read data from the now empty file but don't correctly check that it worked. That would explain the weird "content" you see of )PHI N.
One solution is to open the file as with r, open another file with w, and transfer the contents, encrypting them as part of that process. Then close both, delete the original, and rename the new one to the original name. This will allow you to process arbitrarily-sized files since you process them a bit at a time.
If you don't want to use a temporary file, and you're sure you can store the entire content in memory, you could open it r+, get the content, the reopen it with a new mode, such as with:
FILE *readFh = fopen( "myfile.txt", "r+");
// Read in content, massage as needed.
FILE *writeFh = frepoen( NULL, "w+", readFh);
// Provided that worked, you should now have an empty file to write to.
// Write back your massaged data.
I want to first write something to a file, then use fgets to read it. But I want it to work without close it and switch file open mode between read and write,
I have tried r+ and w+ for file open. For r+ it is able to read original content but fail to read newly inserted content. For w+ it does not read anything I think that's because w+ clear the original content.
I currently found no way to read the newly inserted content of a file before close and switch file open mode, although with fflush new content is already written to a file and can be viewed externally.
Here is a simple code snippet for testing.
#include <stdio.h>
int main()
{
FILE *fp = NULL;
char line[256];
int status;
/*input by user*/
scanf("%s", line);
/*write to a file*/
fp = fopen("f5.txt", "w+");
fprintf(fp, "%s", line);
fflush(fp); /*flush buffer*/
/*read it*/
char lineRead[256];
while (fgets(lineRead, 5, fp) != NULL) {
puts(lineRead);
}
fclose(fp);
}
You might use not only fflush, but also rewind, fseek, ftell (or even fgetpos & fsetpos)
Beware that any standard IO function can fail, and you should check that.
On Linux, some files (e.g. fifo(7)) are not seekable.
Perhaps you want some higher level way of storing persistent data on the disk. Did you consider using some library for indexed files (like gdbm) or for databases (like sqlite)? Or even use a full fledged database, like with some RDBMS (e.g. PostGreSQL or MySQL or MariaDB which are free software), or some NoSQL thing like e.g. MongoDB ?
There is no way to insert a sequence of bytes in the middle of some file or to delete, i.e. remove, a sequence of bytes inside a file. This is a fundamental limitation of file systems on most current operating systems (and on all usual ones like Linux & Windows & Android & MacOSX). You generally should copy that file (by chunks) into some other one (and libraries like gdbm or sqlite don't do that, they either append some data to a file at its end or rewrite some bytes inside the file; they might also truncate a file).
In particular, if you want to programmatically insert some line in the middle of some small text file, you usually should read the file entirely in some appropriate data structure, modify that data structure in memory, then dump that data structure into the (overwritten) file.
You need to use fseek() to return to the beginning of the file before trying to read it.
Here's my issue: I have a file with the highscore written in it (just the first line, no nicknames, just the highscore), I need to read that line and compare it with the actual score obtained in the game session, if the score is higher, overwrite the file with the new value, but if I try to read it I get a null value... Seems like i'm not reading it the right way. What's wrong with my code?
Thanks for the help!
local path = system.pathForFile( "data.sav", system.DocumentsDirectory )
local file = io.open( path, "w+" )
highscore_letta = file:read("*n")
print(highscore_letta)
if (_G.player_score > tonumber(highscore_letta)) then
file:write(_G.player_score)
end
io.close( file )
I had this problem myself. I found out that if you open a file in "w+" mode, the current contents are deleted, so that you can write new contents. So to read and write you have to open the file twice. First, you open the file in "rb" mode and get the file contents, then close it. Then you reopen it in "wb" mode, write the new number, and close it.
In Windows, you need "b" in the file mode. Otherwise, the strings that you are reading and writing may be modified in unexpected ways: for instance, a newline ("\n") may be replaced with carriage return–newline ("\r\n").
The file modes that Lua supports are borrowed from the C language. (I found a description on page 305 of what I guess is a draft of the C specification.) I think the Lua manual sort of assumes that you will know what these modes mean, as an experienced C programmer would, but to me it wasn't at all obvious.
Thus to read a number and then write a new one:
local filepath = "path/to/file"
-- Create a file handle that will allow you to read the current contents.
local read_file = io.open(filepath, "rb")
number = read_file:read "*n" -- Read one number. In Lua 5.3, use "n"; the asterisk is not needed.
read_file:close() -- Close the file handle.
local new_number = 0 -- Replace this with the number you actually want to write.
-- Create a file handle that allows you to write new contents to the file,
-- while deleting the current contents.
write_file = io.open(filepath, "wb")
write_file:write(new_number) -- Overwrite the entire contents of the file.
write_file:flush() -- Make sure the new contents are actually saved.
write_file:close() -- Close the file handle.
I created a script to do these operations automatically, as they're somewhat annoying to type every time.
The mode "r+" or "r+b" is supposed to allow you to read and write, but I couldn't get it to work when the original contents are longer than the new contents. If the original contents are "abcd", four bytes, and the new contents are "efg", three bytes, and you write at offset 0 in the file, the file will now have "efgd": the last byte of the original contents is not deleted.
How can I insert characters in a file using C instead of overwriting? I also want to write in start of file and end of a file. I tried this method but it didn't work out (I can re-position but I cannot insert. The text is overwritten)
I've tried this, but it didn't work:
fword = fopen("wrote.txt", "rb+");
fseek(fword, 0, SEEK_SET);
fscanf(fword, "%c", &l);
To add text at the end, you can open the file with "a" mode (check the fopen manual). It will write your text to end.
To add text in other positions, you have to read everything after that to memory, write what you want and then write the rest.
Files are abstractions of byte streams, there is no such concept as insert in a byte stream, you can seek into certain place and write data there. The bytes you wrote will lay in the file as an array of bytes, if the writing exceeds the current file size, the file will be extended.