I am trying to install Bootcamp on a Late 2011 15" MBP. The DVD drive is dead, so I created a Windows Install DVD .iso file using another machine.
The Apple help pages imply that I can use this file, but they are not clear on where to locate it. The help text indicates that I should be prompted to select the .iso file location (although the example refers to Windows 8 - I am using Windows 7).
However, when run the Bootcamp Assistant, I get a message "The installer disk could not be found."
Any suggestions?
The answer is that with El Capitan (10.11), you must use an DVD.
Related
I just installed the Anylogic 8 PLE from the website. Here is a example .alp file (https://cloud.anylogic.com/model/e4e5977c-ecec-4d6f-b21f-6e6de7f73a81?mode=SETTINGS) but I can not open it with Maylogic 8 PLE. My computer is maxOS Monterey (Version 12.6.2).
Just no any responses when I tried to drag it to the software.I suspect there is some problems with my computer or the file version?
Someone helps me please....
Basically I have some C/C++ code that I need to build and debug on a Linux machine. Unfortunately, my windows laptop doesn't have enough free hard space to install some Linux dist nor does it have enough free RAM to comfortably run VM.
Until now, I dealt with it rather comfortably using WSL, but the scale was rather small. It was easy to edit and debug 2-3 .c files through CLI and gdb, but it became really annoying on a large scale projects.
I want something simple as "edit code in windows IDE [X], compile it on remote Linux/WSL (the project uses Makefiles), and preferably debug it via gdb".
VS has something close to what I want, but it can't deal with existing Linux projects. It needs to create a new configuration which is alien to the project's Makefile.
I know this question is a bit old, but I think the solution is to make a symlink between your WSL folder and the Window's folder. This is how I handled it for a Ubuntu-20.04 WSL:
Access PowerShell in Administrator mode
Type cmd.exe in the PowerShell
Once cmd.exe is opened, type mklink /d C:\<path_to_your_Windows_folder> \\wsl$\Ubuntu-20.04\home\<your_user>\<path_to_your_WSL_folder>
EDIT
This was tested under Windows 10 Version 2004 with WSL2
I'm unsure about C and C++ but it sounds like this is exactly the same as how i work in node and javascript every day.
I checkout my code using git inside WSL to a location like /mnt/c/code/myproject. Then using sublime/VS code/webstorm i edit the files in windows in the location c:\code\myproject this works really well and have been doing this every day for over a year.
Things to be aware of are that you need to ensure that your editor of choice saves files with linux line endings and that all command line operations are done inside WSL.
Please see this article to see the differences between windows and linux files and how this works inside the WSL.
I want something simple as "edit code in windows IDE , compile it on remote linux/WSL
You will have something as simple as that.
Only with Windows 19.03 though:
See "Updated WSL in Windows 10 version 1903 lets you access Linux files from Windows"
Microsoft's Craig Loewen says:
In the past, creating and changing Linux files from Windows resulted in losing files or corrupting data. Making this possible has been a highly requested and long anticipated feature. We're proud to announce you can now easily access all the files in your Linux distros from Windows.
So how does this work? He goes on to explain:
To put it briefly: a 9P protocol file server facilitates file related requests, with Windows acting as the client.
We've modified the WSL init daemon to include a 9P server. This server contains protocols that support Linux metadata, including permissions.
There is a Windows service and driver that acts as the client and talks to the 9P server (which is running inside of a WSL instance).
Client and server communicate over AF_UNIX sockets, since WSL allows interop between a Windows application and a Linux application using AF_UNIX as described in this post.
Warning:
The old rules still apply, you should NOT access your Linux files inside of the AppData folder!
If you try to access your Linux files through your AppData folder, you are bypassing using the 9P server, which means that you will not have access to your Linux files, and you could possibly corrupt your Linux distro.
I am learning C and I want to install MinGW on my laptop. The MinGW installer is a web-installer, it requires the computer to have access to the internet when installing. But the problem is that my computer's not connected to the internet. So it can't be installed.
So I am thinking of downloading the complete offline installer on my smart-phone and transfering it to my PC through blue-tooth.
I have already tried TDM-GCC, but even that requires me to download somthing.
So is there an offline installer to MinGW? If yes where can I get it?
I did not find an offline installer for MinGW,but instead I found a better Windows port; which is MinGW-W64
From http://mingw-w64.yaxm.org/doku.php:
Mingw-w64 is an advancement of the original mingw.org project, created to support the GCC compiler on Windows systems. It has forked it in 2007 in order to provide support for 64 bits and new APIs. It has since then gained widespread use and distribution.
Now to answer this question: it has to be mannually installed by downloading the zip file. It won't require additional download.
You can download it from link : https://github.com/jonasstrandstedt/MinGW
You need to extract the MinGW folder in C:\ eg: c:\MinGW . Then what you need to follow the steps given in the link above. In CodeBlock IDE go to settings>compiler>Tochain Executables. There you need to click on auto detect or specify the folder manually.
The most direct answer to the question "Is there an offline MinGW installer?" is "maybe, but it would be a snapshot from the past, and it's almost certainly not up-to-date with the latest available released versions." The individual packages are made available (almost) as soon as they're released, so capturing everything in a self-contained installer is a moving target.
But, you can use the standard installer offline with a bit of prep work if you use MSYS2's pacman, which manages dependencies and grabs all the right versions for you.
The details are given in an answer to another question (https://stackoverflow.com/a/46791235/).
Based on what I read here, in order to install CF version 2 on my handheld device, I should copy over one of the cab files here:
...but which one?
The device in question is a Symbol 3090, which currently has only CF version 1.0.3316.00 (1.0 SP2) installed. The OS version of the device is 05.00.1400
The device CPU is presumably 'ARMV4I' as a similar device (Motorola 3190) says that it is equipped with such.
UPDATE
Based on what I see here when I click "this link" here:
-- OR -- If you have Windows Mobile 5 or newer on your device, click this link and save the file to the desktop of your computer.
...it seems "NETCFv2.wm.armv4i.cab" is probably the best choice.
Any refutations?
UPDATE 2
I copied the file I reckoned to be the one, and clicked it on the device, but:
What in Sam L. Clemens' illustrious memory is going on here?!?
UPDATE 3
I then copied over the other file from the link above, which was slightly different (2.12MB as opposed to 2.14MB, for one thing), and tried to run it, and got the same err msg as above.
UPDATE 4
Trying to install from the last link, I see:
UPDATE 5
Actually, it turns out that what I might really need is to install CF version 1 after a cold boot of the device...but I don't know if version 1 of CF is still available. That's the only version the existing .exe will run on, but my PC only has cab files for versions 2 and 3.5...???
UPDATE 6
In the most recent version of the .exe (builds and compiles, but won't run on either device), it has three, count 'em three mscorlibs in its References area; the versions are:
1.0.5000.0
2.0.0.0
3.5.0.0
They all have the same public key token (the same as shown in the screen shot)
The only other multi-reference is System, which has both version 2 and 3.5
AND, below System.Xml, there are three coredll.dlls, albeit spelled differently:
coredll.dll
CoreDll.dll
CoreDll.DLL
(no info for any of them...???)
UPDATE 7
I copied NETCFv2.wce4.ARMV4.cab to the 3090.
I 2-clicked it on the device, but got this:
And so, I retreated (selected "No").
Thus continue unabated the travails of an accidental handheld developer.
UPDATE 8
The project is set to Framework Version == v2.0, Platform == Windows CE, Target Device == Windows Mobile 6 Classic Emulator (one of the few emulator choices I have), and the output shows that it is ARMV4i that is being deployed:
Deploying '%CSIDL_PROGRAM_FILES%\Microsoft SQL Server Compact Edition\v3.5\Devices\wce500\ARMV4i
\sqlce.ppc.wce5.armv4i.CAB'
Deploying '%CSIDL_PROGRAM_FILES%\Microsoft SQL Server Compact Edition\v3.5\Devices\wce500\ARMV4i
\sqlce.repl.ppc.wce5.armv4i.CAB'
Deploying '%CSIDL_PROGRAM_FILES%\Microsoft SQL Server Compact Edition\v3.5\Devices\wce500\ARMV4i
\sqlce.dev.enu.ppc.wce5.armv4i.CAB'
Deploying 'C:\Program Files (x86)\Motorola EMDK for .NET\v2.8\SDK\Smart Devices\wce500\armv4i\symbol.all.arm.cab'
And when I run the .exe in the emulator, it fails with, "Error - An unexpected error has occurred in Platypus.exe
Select Quit and restart this program, or select Details for more information.
This application requires a newer version of the MS .NET Compact Framework than the version installed on this device."
Selecting the "Details" button augments the mental anguish with, "TypeLoadException
This application requires a newer version of the MS .NET Compact Framework than the version installed on this device."
Assuming your are using the WinCE 4.2 version of the 3090 (it comes in 4.2 and 5.0), you should proceed with the install using NETCFv2.wce4.ARMV4.cab. "The program is not compatible..." message is a warning only, and not a very smart one. There is even a way to edit the cab to remove that warning if you wanted to, though my memory fails me on the exact way to do it. I've had to do it to allow a silent install before (otherwise the nag screen gets in your way).
First you need to figure out what version of CE you are running. You can find this by going to System Properties. Also while you are in System Properties note what processor you are running ( arm, mips ...). If you are running windows ce 4.2 or higher you will pick a cab file out of the wce400 folder. If you are running windows CE 5.0 or higher you will pick a cab file out of the wce500 folder. Note you can't install .net 2.0 on windows ce 4.1 or lower, according to Microsoft documentation, however, I have noticed that the minimum version setting on the cab files is 4.0, so you might be able to hack it.
Like I said before on also the System Properties page is the type of processor you are using. From that select the appropriate sub-folder in either wce400 or wce500. In most of the folders for each processor there should be only one cab file. If there is more than one cab file see if the file name contains wm for windows mobile, wce for windows ce, or ppc for pocket PC and pick the one most appropriate for you.
You can also take the guess work out of this whole process by creating an ini file with the fallowing text and using ceappmgn.exe to pick and install the right cab file for you.
[CEAppManager]
Version = 1.0
Component = NETCF
[NETCF]
Description = .NET Compact Framework v2.0
CabFiles=wce400\armv4\NETCFv2.ppc.armv4.cab,wce400\armv4\NETCFv2.wce4.ARMV4.cab,wce400\mipsii\NETCFv2.wce4.MIPSII.cab,wce400\mipsiv\NETCFv2.wce4.MIPSIV.cab,wce400\sh4\NETCFv2.wce4.sh4.cab,wce400\x86\NETCFv2.wce4.x86.cab,wce500\armv4i\NETCFv2.wm.armv4i.cab,wce500\mipsii\NETCFv2.wce5.mipsii.cab,wce500\mipsiv\NETCFv2.wce5.mipsiv.cab,wce500\sh4\NETCFv2.wce5.sh4.cab,wce500\armv4i\NETCFv2.wce5.armv4i.cab
i have MYOB installed on one computer and that system crush due to virus, i got all myob data and program files.
problem is i don't have installer for MYOB, i lost it.
i copy all the myob folder to c:\program files\myob
and try to run myob, its giving MYOB ERROR 9004
after i search on net i found that i need to create these registry entries which i did
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\MYOB Technology]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU\MSC]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU\MSC\3.0]
"JavaHome"="C:\\Program Files\\MYOB\\Common\\JRE"
now program run and after getting user name & password it give error initialization error.
does any one have idea how to run myob on system without installing it.
Thanks
are you copying all folders, this error seems that you are missing some files/ folders.
check all the folders and files.
Make sure you also copy and paste over the MYOB file in your Program files, as well as the MYOBVersion as this is where the licence is!
The best answer will depend on which product and version you have installed and for the most accurate detail you're best reaching out to support directly.
For products like AccountRight Live you can easily re-install the software on the new computer. You can get fresh copies of the installers from the product downloads section of your my.myob.com login.
Individual company files (.myox for AccountRight Live) can be copied to the new computer and then opened (in much the same way you would install Microsoft Word and then open a Word .docx document) noting that each file is linked to the serial number.
And lastly on a note of personal advice: run a patched anti-virus on the new machine :)