Related
I want to make a game using SDL2, but I'm unable to compile and/or run my code, please help!
SDL2 is notoriously hard to set up, and it's often the first library aspiring game developers try to use.
This post is intended as a canonical duplicate for common problems with setting up SDL2.
This answer is about MinGW / GCC, and not Visual Studio.
This answer only applies to Windows.
Common errors
The common errors are:
SDL.h: No such file or directory (when compiling)
Various SDL_main problems: "undefined reference to SDL_main", "conflicting types for SDL_main" or "number of arguments doesn't match prototype", etc. (when compiling or linking)
undefined reference to other functions (when linking)
DLL problems: (when running your program)
'??.dll' was not found
procedure entry point ... could not be located in ..., and other mysterious DLL-related errors
The program seemingly doing nothing when launched
This list is sorted from bad to good. If you change something and get a different error, use this list to tell if you made things better or worse.
The preamble
0. Don't follow bad advice.
Some resources will suggest you to do #define SDL_MAIN_HANDLED or #undef main. Don't blindly follow that advice, it's not how SDL2 is intended to be used.
If you do everything correcty, it will never be necessary. Learn the intended approach first. Then you can research what exactly that does, and make an educated decision.
1. Figure out how to compile directly from the console, you can start using an IDE and/or build system later.
If you're using an IDE, I suggest to first make sure you're able to compile your program directly from the console, to rule out any IDE configuration problems. After you figure that out, you can use the same compiler options in your IDE.
The same applies to build systems, such as CMake.
2. Download the right SDL2 files. Make sure you have the right files. You need the archive called SDL2-devel-2.0.x-mingw.tar.gz from here.
Extract it to any directory, preferably somewhere near your source code. Extracting into the compiler installation directory is often considered a bad practice (and so is copying them to C:\Windows, which is a horrible idea).
3. Know the difference between compiler flags and linker flags. A "flag" is an option you specify in the command line when building your program. When you use a single command, e.g. g++ foo.cpp -o foo.exe, all your flags are added to the same place (to this single command).
But when you build your program in two steps, e.g.:
g++ foo.cpp -c -o foo.o (compiling)
g++ foo.o -o foo.exe (linking)
you have to know which of the two commands to add a flag to. Those are "compiler flags" and "linker flags" respectively.
Most IDEs will require you to specify compiler and linker flags separately, so even if you use a single command now, it's good to know which flag goes where.
Unless specified otherwise, the order of the flags doesn't matter.
SDL.h: No such file or directory
Or any similar error related to including SDL.h or SDL2/SDL.h.
You need to tell your compiler where to look for SDL.h. It's in the SDL files you've downloaded (see preamble).
Add -Ipath to your compiler flags, where path is the directory where SDL.h is located.
Example: -IC:/Users/HolyBlackCat/Downloads/SDL2-2.0.12/x86_64-w64-mingw32/include/SDL2. Relative paths work too, e.g. -ISDL2-2.0.12/x86_64-w64-mingw32/include/SDL2.
Note that the path will be different depending on how you write the #include:
If you do #include <SDL.h>, then the path should end with .../include/SDL2 (like above). This is the recommended way.
If you do #include <SDL2/SDL.h>, then the path should end with .../include.
Various SDL_main problems
You can get several different errors mentioning SDL_main, such as undefined reference to SDL_main, or conflicting types for 'SDL_main', or number of arguments doesn't match prototype, etc.
You need to have a main function. Your main function must look like int main(int, char **). NOT int main() and NOT void main(). This is a quirk of SDL2, related to it doing #define main SDL_main.
Adding parameter names is allowed (and is mandatory in C), e.g. int main(int argc, char **argv). Also the second parameter can be written as char *[] or with a name: char *argv[]. No other changes are allowed.
If your project has multiple source files, make sure to include SDL.h in the file that defines the main function, even if it doesn't otherwise use SDL directly.
Try to avoid #define SDL_MAIN_HANDLED or #undef main when solving this issue, see preamble for explanation.
undefined reference to various functions
• undefined reference to SDL_...
The error message will mention various SDL_... functions, and/or WinMain. If it mentions SDL_main, consult the section "Various SDL_main problems" above. If the function names don't start with SDL_, consult the section "undefined reference to other functions" below.
You need to add following linker flags: -lmingw32 -lSDL2main -lSDL2 -Lpath, where path is the directory where libSDL2.dll.a and libSDL2main.a (which you've downloaded) are located. The order of the -l... flags matters. They must appear AFTER any .c/.cpp/.o files.
Example: -LC:/Users/HolyBlackCat/Desktop/SDL2-2.0.12/x86_64-w64-mingw32/lib. Relative paths work too, e.g. -LSDL2-2.0.12/x86_64-w64-mingw32/lib.
When you use -l???, the linker will look for a file called lib???.dll.a or lib???.a (and some other variants), which is why we need to pass the location of those files. libmingw32.a (corresponding to -lmingw32) is shipped with your compiler, so it already knows where to find it.
I added all those flags and nothing changed, or I'm getting skipping incompatible X when searching for Y:
You probably use the wrong SDL .a files. The archive you downloaded contains two sets of files: i686-w64-mingw32 (32-bit) and x86_64-w64-mingw32 (64-bit). You must use the files matching your compiler, which can also be either 32-bit or 64-bit.
Print (8*sizeof(void*)) to see if your compiler is 32-bit or 64-bit.
Even if you think you use the right files, try the other ones to be sure.
Some MinGW versions can be switched between 32-bit and 64-bit modes using -m32 and -m64 flags (add them to both compiler and linker flags).
I get undefined reference to a specific function:
• undefined reference to WinMain only
There are several possibilities, all of which were covered in the previous section:
You forgot -lmingw32 and/or -lSDL2main linker flags.
You must use following linker flags, in this exact order, after
any .c/.cpp/.o files: -lmingw32 -lSDL2main -lSDL2
The libSDL2main.a file you use doesn't match your compiler (32-bit file with a 64-bit compiler, or vice versa).
Try to avoid #define SDL_MAIN_HANDLED or #undef main when solving this issue, see preamble for explanation.
• undefined reference to SDL_main only
See the section "Various SDL_main problems" above.
• undefined reference to other functions
Your linker found and used libSDL2.a, but it should be finding and using libSDL2.dll.a. When both are available, it prefers the latter by default, meaning you didn't copy the latter to the directory you passed to -L.
If you intended to perform static linking, see the section called "How do I distribute my app to others?" below.
Nothing happens when I try run my app
Let's say you try to run your app, and nothing happens. Even if you try to print something at the beginning of main(), it's not printed.
Windows has a nasty habit of not showing some DLL-related errors when the program is started from the console.
If you were running your app from the console (or from an IDE), instead try double-clicking the EXE in the explorer. Most probably you'll now see some DLL-related error; then consult one of the next sections.
??.dll was not found
Copy the .dll mentioned in the error message, and place it next to your .exe.
If the DLL is called SDL2.dll, then it's in the SDL files you've downloaded (see preamble). Be aware that there are two different SDL2.dlls: a 32-bit one (in the i686-w64-mingw32 directory), and a 64-bit one (in x86_64-w64-mingw32). Get the right one, if necessary try both.
Any other DLLs will be in your compiler's bin directory (the directory where gcc.exe is located).
You might need to repeat this process 3-4 times, this is normal.
For an automatic way of determining the needed DLLs, see the next section.
procedure entry point ... could not be located in ... and other cryptic DLL errors
Your program needs several .dlls to run, and it found a wrong version of one, left over from some other program you have installed.
It looks for DLLs in several different places, but the directory with the .exe has the most priority.
You should copy all DLLs your program uses (except the system ones) into the directory where your .exe is located.
A reliable way to get a list of needed DLLs is to blindly copy a bunch of DLLs, and then remove the ones that turn out to be unnecessary:
Copy SDL2.dll. It's in the SDL files you've downloaded (see preamble). Be aware that there are two different SDL2.dlls: a 32-bit one (in the i686-w64-mingw32 directory), and a 64-bit one (in x86_64-w64-mingw32). Get the right one, if necessary try both.
Copy all DLLs from your compiler's bin directory (the directory where gcc.exe is located).
Now your program should run, but we're not done yet.
Download NTLDD (or some other program that displays a list of used DLLs). Run ntldd -R your_program.exe.
Any DLL not mentioned in its output should be removed from the current directory. Your program uses everything that remains.
I ended up with following DLLs, expect something similar: SDL2.dll, libgcc_s_seh-1.dll, libstdc++-6.dll (C++ only), libwinpthread-1.dll.
Can I determine the needed DLLs without copying excessive ones?
Yes, but it's less reliable.
Your program searches for DLLs in following locations, in this order:
The directory where your .exe is located.
C:\Windows, including some of its subdirectories.
The directories listed in PATH.
Assuming you (or some jank installer) didn't put any custom DLLs into C:\Windows, adding your compiler's bin directory to the PATH (preferably as the first entry) and either putting SDL2.dll in the same directory as the .exe or into some directory in the PATH should be enough for your program to work.
If this works, you can then run ntldd without copying any DLLs beforehand, and copy only the necessary ones. The reason why you'd want to copy them at all at this point (since your app already works) is to be able to distribute it to others, without them having to install the compiler for its DLLs. Skip any DLLs located outside of your compiler's bin directory (except for SDL2.dll).
Note that the possibility of having weird DLLs in C:\Windows is real. E.g. Wine tends to put OpenAL32.dll into C:\Windows, so if you try this process with OpenAL on Wine, it will fail. If you're making a sciprt that runs ntldd automatically, prefer copying the DLLs (or at least symlinking them - I heard MSYS2 can emulate symlinks on Windows?).
Can I make an EXE that doesn't depend on any DLLs?
It's possible to make an .exe that doesn't depend on any (non-system) .dlls by using the -static linker flag, this is called "static linking". This is rarely done, and you shouldn't need to do this if you did the above steps correctly. This requires some additional linker flags; they are listed in file ??-w64-mingw32/lib/pkgconfig/sdl2.pc shipped with SDL, in the Libs.private section. Notice that there are two files, for x32 and x64 respectively.
How do I distribute my app to others?
Follow the steps in the previous section, titled procedure entry point ... could not be located in ....
A saner alternative?
There is MSYS2.
It has a package manager that lets you download prebuilt libraries, and, as a bonus, a fresh version of the compiler.
Install SDL2 from its package manager. Use a tool called pkg-config (also from the package manager) to automatically determine all necessary flags (pkg-config --cflags SDL2 for compiler flags, pkg-config --libs SDL2 for linker flags).
This is the same experience as you would have on Linux (maybe except for some DLL management hassle).
Bonus - Other problems
Q: My program always opens a console window when I run it, how do I hide it?
A: Add -mwindows to the linker flags.
Q: I get error 'SDL_VideoMode' wasn't declared in this scope.
A: SDL_VideoMode is from SDL1.2, it's not a part of the newer SDL2. Your code was written for the outdated version of SDL. Find a better tutorial that deals specifically with SDL2.
Q: My program has the default file icon, but I want a custom one.
A: Your icon must be in the .ico format. If your graphics editor doesn't support it, make a series of .pngs of common sizes (e.g. 16x16, 32x32, 48x48, 64x64), then convert them to a single .ico using ImageMagick: magick *.png result.ico (or with convert instead of magick).
Create a file with the .rc extension (say, icon.rc), with following contents MyIconName ICON "icon.ico" (where MyIconName is an arbitrary name, and "icon.ico" is the path to the icon). Convert the file to an .o using windres -O res -i icon.rc -o icon.o (the windres program is shipped with your compiler). Specify the resulting .o file when linking, e.g. g++ foo.cpp icon.o -o foo.exe.
Recent versions of SDL2 have a nice property of using the same icon as the window icon, so you don't have to use SDL_SetWindowIcon.
A solution for Visual Studio:
Why not use a package manager? I use vcpkg, and it makes super easy to consume 3rd party libraries. Grab the vcpkg source, and extract it to a safe place, like C:/, then run its bootstrap script bootstrap-vcpkg.bat, this will generate vcpkg executable. Then run vcpkg integrate install to make libraries installed with vcpkg available in Visual Studio.
Search for the library you need:
vcpkg search sdl
imgui[sdl2-binding] Make available SDL2 binding
libwebp[vwebp-sdl] Build the vwebp viewer tool.
magnum[sdl2application] Sdl2Application library
sdl1 1.2.15#12 Simple DirectMedia Layer is a cross-platform development library designed to p...
sdl1-net 1.2.8-3 Networking library for SDL
sdl2 2.0.12-1 Simple DirectMedia Layer is a cross-platform
...
Install it with: vcpkg install sdl2.
Now you just need include SDL2 headers, and everything will work out of the box. The library will be linked automatically.
You can learn more about vcpkg here.
On Mac this is what I follow for XCode (must install g++):
sdl linking:
g++ main.cpp -o main $(sdl2-config --cflags --libs)
XCODE project steps:
open terminal app (macOS)
BUILD SETTINGS (select 'all' and 'combined' search bar enter: "search")
click on "header search paths(way right side click)
add: /usr/local/include
BUILD PHASES --> LINK BINARY LIBRARIES (click plus)
type in SDL --> click "add other"
press: command+SHIFT+g (to bring search bar)
type in: usr/local/Cellar
navigate to: SDL2 -->2.0.8 -->lib --> libSDL2-2.2.0.dylib (make sure not shortcut)
I want to make a game using SDL2, but I'm unable to compile and/or run my code, please help!
SDL2 is notoriously hard to set up, and it's often the first library aspiring game developers try to use.
This post is intended as a canonical duplicate for common problems with setting up SDL2.
This answer is about MinGW / GCC, and not Visual Studio.
This answer only applies to Windows.
Common errors
The common errors are:
SDL.h: No such file or directory (when compiling)
Various SDL_main problems: "undefined reference to SDL_main", "conflicting types for SDL_main" or "number of arguments doesn't match prototype", etc. (when compiling or linking)
undefined reference to other functions (when linking)
DLL problems: (when running your program)
'??.dll' was not found
procedure entry point ... could not be located in ..., and other mysterious DLL-related errors
The program seemingly doing nothing when launched
This list is sorted from bad to good. If you change something and get a different error, use this list to tell if you made things better or worse.
The preamble
0. Don't follow bad advice.
Some resources will suggest you to do #define SDL_MAIN_HANDLED or #undef main. Don't blindly follow that advice, it's not how SDL2 is intended to be used.
If you do everything correcty, it will never be necessary. Learn the intended approach first. Then you can research what exactly that does, and make an educated decision.
1. Figure out how to compile directly from the console, you can start using an IDE and/or build system later.
If you're using an IDE, I suggest to first make sure you're able to compile your program directly from the console, to rule out any IDE configuration problems. After you figure that out, you can use the same compiler options in your IDE.
The same applies to build systems, such as CMake.
2. Download the right SDL2 files. Make sure you have the right files. You need the archive called SDL2-devel-2.0.x-mingw.tar.gz from here.
Extract it to any directory, preferably somewhere near your source code. Extracting into the compiler installation directory is often considered a bad practice (and so is copying them to C:\Windows, which is a horrible idea).
3. Know the difference between compiler flags and linker flags. A "flag" is an option you specify in the command line when building your program. When you use a single command, e.g. g++ foo.cpp -o foo.exe, all your flags are added to the same place (to this single command).
But when you build your program in two steps, e.g.:
g++ foo.cpp -c -o foo.o (compiling)
g++ foo.o -o foo.exe (linking)
you have to know which of the two commands to add a flag to. Those are "compiler flags" and "linker flags" respectively.
Most IDEs will require you to specify compiler and linker flags separately, so even if you use a single command now, it's good to know which flag goes where.
Unless specified otherwise, the order of the flags doesn't matter.
SDL.h: No such file or directory
Or any similar error related to including SDL.h or SDL2/SDL.h.
You need to tell your compiler where to look for SDL.h. It's in the SDL files you've downloaded (see preamble).
Add -Ipath to your compiler flags, where path is the directory where SDL.h is located.
Example: -IC:/Users/HolyBlackCat/Downloads/SDL2-2.0.12/x86_64-w64-mingw32/include/SDL2. Relative paths work too, e.g. -ISDL2-2.0.12/x86_64-w64-mingw32/include/SDL2.
Note that the path will be different depending on how you write the #include:
If you do #include <SDL.h>, then the path should end with .../include/SDL2 (like above). This is the recommended way.
If you do #include <SDL2/SDL.h>, then the path should end with .../include.
Various SDL_main problems
You can get several different errors mentioning SDL_main, such as undefined reference to SDL_main, or conflicting types for 'SDL_main', or number of arguments doesn't match prototype, etc.
You need to have a main function. Your main function must look like int main(int, char **). NOT int main() and NOT void main(). This is a quirk of SDL2, related to it doing #define main SDL_main.
Adding parameter names is allowed (and is mandatory in C), e.g. int main(int argc, char **argv). Also the second parameter can be written as char *[] or with a name: char *argv[]. No other changes are allowed.
If your project has multiple source files, make sure to include SDL.h in the file that defines the main function, even if it doesn't otherwise use SDL directly.
Try to avoid #define SDL_MAIN_HANDLED or #undef main when solving this issue, see preamble for explanation.
undefined reference to various functions
• undefined reference to SDL_...
The error message will mention various SDL_... functions, and/or WinMain. If it mentions SDL_main, consult the section "Various SDL_main problems" above. If the function names don't start with SDL_, consult the section "undefined reference to other functions" below.
You need to add following linker flags: -lmingw32 -lSDL2main -lSDL2 -Lpath, where path is the directory where libSDL2.dll.a and libSDL2main.a (which you've downloaded) are located. The order of the -l... flags matters. They must appear AFTER any .c/.cpp/.o files.
Example: -LC:/Users/HolyBlackCat/Desktop/SDL2-2.0.12/x86_64-w64-mingw32/lib. Relative paths work too, e.g. -LSDL2-2.0.12/x86_64-w64-mingw32/lib.
When you use -l???, the linker will look for a file called lib???.dll.a or lib???.a (and some other variants), which is why we need to pass the location of those files. libmingw32.a (corresponding to -lmingw32) is shipped with your compiler, so it already knows where to find it.
I added all those flags and nothing changed, or I'm getting skipping incompatible X when searching for Y:
You probably use the wrong SDL .a files. The archive you downloaded contains two sets of files: i686-w64-mingw32 (32-bit) and x86_64-w64-mingw32 (64-bit). You must use the files matching your compiler, which can also be either 32-bit or 64-bit.
Print (8*sizeof(void*)) to see if your compiler is 32-bit or 64-bit.
Even if you think you use the right files, try the other ones to be sure.
Some MinGW versions can be switched between 32-bit and 64-bit modes using -m32 and -m64 flags (add them to both compiler and linker flags).
I get undefined reference to a specific function:
• undefined reference to WinMain only
There are several possibilities, all of which were covered in the previous section:
You forgot -lmingw32 and/or -lSDL2main linker flags.
You must use following linker flags, in this exact order, after
any .c/.cpp/.o files: -lmingw32 -lSDL2main -lSDL2
The libSDL2main.a file you use doesn't match your compiler (32-bit file with a 64-bit compiler, or vice versa).
Try to avoid #define SDL_MAIN_HANDLED or #undef main when solving this issue, see preamble for explanation.
• undefined reference to SDL_main only
See the section "Various SDL_main problems" above.
• undefined reference to other functions
Your linker found and used libSDL2.a, but it should be finding and using libSDL2.dll.a. When both are available, it prefers the latter by default, meaning you didn't copy the latter to the directory you passed to -L.
If you intended to perform static linking, see the section called "How do I distribute my app to others?" below.
Nothing happens when I try run my app
Let's say you try to run your app, and nothing happens. Even if you try to print something at the beginning of main(), it's not printed.
Windows has a nasty habit of not showing some DLL-related errors when the program is started from the console.
If you were running your app from the console (or from an IDE), instead try double-clicking the EXE in the explorer. Most probably you'll now see some DLL-related error; then consult one of the next sections.
??.dll was not found
Copy the .dll mentioned in the error message, and place it next to your .exe.
If the DLL is called SDL2.dll, then it's in the SDL files you've downloaded (see preamble). Be aware that there are two different SDL2.dlls: a 32-bit one (in the i686-w64-mingw32 directory), and a 64-bit one (in x86_64-w64-mingw32). Get the right one, if necessary try both.
Any other DLLs will be in your compiler's bin directory (the directory where gcc.exe is located).
You might need to repeat this process 3-4 times, this is normal.
For an automatic way of determining the needed DLLs, see the next section.
procedure entry point ... could not be located in ... and other cryptic DLL errors
Your program needs several .dlls to run, and it found a wrong version of one, left over from some other program you have installed.
It looks for DLLs in several different places, but the directory with the .exe has the most priority.
You should copy all DLLs your program uses (except the system ones) into the directory where your .exe is located.
A reliable way to get a list of needed DLLs is to blindly copy a bunch of DLLs, and then remove the ones that turn out to be unnecessary:
Copy SDL2.dll. It's in the SDL files you've downloaded (see preamble). Be aware that there are two different SDL2.dlls: a 32-bit one (in the i686-w64-mingw32 directory), and a 64-bit one (in x86_64-w64-mingw32). Get the right one, if necessary try both.
Copy all DLLs from your compiler's bin directory (the directory where gcc.exe is located).
Now your program should run, but we're not done yet.
Download NTLDD (or some other program that displays a list of used DLLs). Run ntldd -R your_program.exe.
Any DLL not mentioned in its output should be removed from the current directory. Your program uses everything that remains.
I ended up with following DLLs, expect something similar: SDL2.dll, libgcc_s_seh-1.dll, libstdc++-6.dll (C++ only), libwinpthread-1.dll.
Can I determine the needed DLLs without copying excessive ones?
Yes, but it's less reliable.
Your program searches for DLLs in following locations, in this order:
The directory where your .exe is located.
C:\Windows, including some of its subdirectories.
The directories listed in PATH.
Assuming you (or some jank installer) didn't put any custom DLLs into C:\Windows, adding your compiler's bin directory to the PATH (preferably as the first entry) and either putting SDL2.dll in the same directory as the .exe or into some directory in the PATH should be enough for your program to work.
If this works, you can then run ntldd without copying any DLLs beforehand, and copy only the necessary ones. The reason why you'd want to copy them at all at this point (since your app already works) is to be able to distribute it to others, without them having to install the compiler for its DLLs. Skip any DLLs located outside of your compiler's bin directory (except for SDL2.dll).
Note that the possibility of having weird DLLs in C:\Windows is real. E.g. Wine tends to put OpenAL32.dll into C:\Windows, so if you try this process with OpenAL on Wine, it will fail. If you're making a sciprt that runs ntldd automatically, prefer copying the DLLs (or at least symlinking them - I heard MSYS2 can emulate symlinks on Windows?).
Can I make an EXE that doesn't depend on any DLLs?
It's possible to make an .exe that doesn't depend on any (non-system) .dlls by using the -static linker flag, this is called "static linking". This is rarely done, and you shouldn't need to do this if you did the above steps correctly. This requires some additional linker flags; they are listed in file ??-w64-mingw32/lib/pkgconfig/sdl2.pc shipped with SDL, in the Libs.private section. Notice that there are two files, for x32 and x64 respectively.
How do I distribute my app to others?
Follow the steps in the previous section, titled procedure entry point ... could not be located in ....
A saner alternative?
There is MSYS2.
It has a package manager that lets you download prebuilt libraries, and, as a bonus, a fresh version of the compiler.
Install SDL2 from its package manager. Use a tool called pkg-config (also from the package manager) to automatically determine all necessary flags (pkg-config --cflags SDL2 for compiler flags, pkg-config --libs SDL2 for linker flags).
This is the same experience as you would have on Linux (maybe except for some DLL management hassle).
Bonus - Other problems
Q: My program always opens a console window when I run it, how do I hide it?
A: Add -mwindows to the linker flags.
Q: I get error 'SDL_VideoMode' wasn't declared in this scope.
A: SDL_VideoMode is from SDL1.2, it's not a part of the newer SDL2. Your code was written for the outdated version of SDL. Find a better tutorial that deals specifically with SDL2.
Q: My program has the default file icon, but I want a custom one.
A: Your icon must be in the .ico format. If your graphics editor doesn't support it, make a series of .pngs of common sizes (e.g. 16x16, 32x32, 48x48, 64x64), then convert them to a single .ico using ImageMagick: magick *.png result.ico (or with convert instead of magick).
Create a file with the .rc extension (say, icon.rc), with following contents MyIconName ICON "icon.ico" (where MyIconName is an arbitrary name, and "icon.ico" is the path to the icon). Convert the file to an .o using windres -O res -i icon.rc -o icon.o (the windres program is shipped with your compiler). Specify the resulting .o file when linking, e.g. g++ foo.cpp icon.o -o foo.exe.
Recent versions of SDL2 have a nice property of using the same icon as the window icon, so you don't have to use SDL_SetWindowIcon.
A solution for Visual Studio:
Why not use a package manager? I use vcpkg, and it makes super easy to consume 3rd party libraries. Grab the vcpkg source, and extract it to a safe place, like C:/, then run its bootstrap script bootstrap-vcpkg.bat, this will generate vcpkg executable. Then run vcpkg integrate install to make libraries installed with vcpkg available in Visual Studio.
Search for the library you need:
vcpkg search sdl
imgui[sdl2-binding] Make available SDL2 binding
libwebp[vwebp-sdl] Build the vwebp viewer tool.
magnum[sdl2application] Sdl2Application library
sdl1 1.2.15#12 Simple DirectMedia Layer is a cross-platform development library designed to p...
sdl1-net 1.2.8-3 Networking library for SDL
sdl2 2.0.12-1 Simple DirectMedia Layer is a cross-platform
...
Install it with: vcpkg install sdl2.
Now you just need include SDL2 headers, and everything will work out of the box. The library will be linked automatically.
You can learn more about vcpkg here.
On Mac this is what I follow for XCode (must install g++):
sdl linking:
g++ main.cpp -o main $(sdl2-config --cflags --libs)
XCODE project steps:
open terminal app (macOS)
BUILD SETTINGS (select 'all' and 'combined' search bar enter: "search")
click on "header search paths(way right side click)
add: /usr/local/include
BUILD PHASES --> LINK BINARY LIBRARIES (click plus)
type in SDL --> click "add other"
press: command+SHIFT+g (to bring search bar)
type in: usr/local/Cellar
navigate to: SDL2 -->2.0.8 -->lib --> libSDL2-2.2.0.dylib (make sure not shortcut)
I am a relatively inexperienced C developer with no previous experience in integrating libraries made by other developers into existing projects.
Basically, I need a means of parsing JSON data in an AVR microcontroller for a university project. To this end I attempted to download and integrate jansson (https://github.com/akheron/jansson) into my existing build of the microcontroller code. I am working with Atmel Studio in Windows 10, but I have also installed Code::Blocks with MinGW GCC (on the same Windows 10 installation) for the purpose of building the library, and to attempt to integrate the library into a native Windows application. So far, neither has been successful, and I get the same errors. All of the online resources I've found so far have been to basic to be useful, or well beyond my comprehension.
This is what I have done thus far:
I began by attempting to build the software and then integrate it into an existing project per the instructions in https://jansson.readthedocs.io/en/2.11/gettingstarted.html. I installed CMake, built the project files for Code::Blocks with cmake.exe -G “CodeBlocks - MinGW Makefiles”, then opened the project and built everything. A few of the targets (I believe related to testing) failed to build, but jansson itself built and output libjansson.a to the \lib\ directory, so I didn’t think too much of it.
That is as far as I’ve been able to get. In both Atmel Studio and Code::Blocks, I do the same thing: add jansson.h to the relevant include paths, add #include “jansson.h” to all of the relevant files, and add libjansson.a as a library in each IDE’s respective linker options. I’ve tried various things like adding and removing flags to the linker, but the output is always “cannot find -ljansson”, “undefined reference to ‘json_object_seed’” (which is a function in the API I’m calling for no reason other than to see if the project has built properly) and/or “ld returned 1 exit status”.
I cannot help but feel as if the issue is with the line “cc -o prog prog.c -ljansson” in the documentation linked above. I really just don’t understand how to set up the linker properly to get the project to build.
If anyone could give some insight into what I’m doing wrong/the correct way to link this library I would appreciate it a lot.
The library itself should be built with appropriate toolchain. I assume that you built your library twice, one version using MinGW toolchain and other with avr-gcc toolchain.
If you compile target application and linker cannot find library, then try to add path of directory that contains *.a file of library to linker settings (linker search path). Let's say you have: /path/to/lib/libjansson.a
In Code::Blocks: Project → Build options → Search directories → Linker add /path/to/lib/. Then it should link with include path set, for example: cc -o prog prog.c -ljansson -L/path/to/lib/
In Atmel Studio when you add a library in Solution Explorer → Libraries → Add Library it should automatically add library search path to linker options. If you check Project → Properties → AVR/GNU Linker there should be (between other options): -Wl,-ljansson -Wl,-L"/path/to/lib/"
If you copied library files (libjansson.a and jansson.h) to your application's project directory, it will be convenient to use relative paths to library files.
I'm currently trying to write an app for Raspberry Pi 3B under Rasbpian with aid of Linux Development plugin in Visual Studio 2017 Community. I managed to successfully deploy 'Blink' example, nobly attached by Microsoft folks, according to tutorial, and that went well. I even made some transmission over SPI thanks to wiringPi library. Then I would like to add some GUI to my app, so that one could, for example, make some transmission on click of a button on screen.
IntelliSense hinted me, that, in fact, there is gtk-3.0 library present in toolset. It seems that libraries are being copied from target device on every connection or so and I installed gtk on my Raspberry. So I added a simple line to this Blink example:
#include <gtk-3.0/gtk/gtk.h>
On compilation attempt, of course there was nearly 4k errors. Well, enough said, with a little hint from this old tutorial and a bit of trial and error, I managed to add this set of links under Debugging/Project properties/Configuration properties/VC++ directories/Header files directories:
Everything goes in promising direction, as errors number diminished from 4k to just one:
gtk-3.0\gtk\gtk.h: No such file or directory
No matter that this file is ACTUALLY in this location:
Regardless of combination of links in configuration above and using statement composition, compiler (?) can't find this damn file.
Please Halp
EDIT
I just confirmed, that it is indeed problem with target configuration. This is bad or good, depending on point of view. Good, because there is probably all good with VS setup. Bad, because I don't know a thing about compiling things under Linux.
On target (Raspberry Pi 3B) all ingredients for compilation are copied by Linux Development plugin. So in Terminal I executed line:
g++ main.cpp -o Blink2onRPi
and got
main.cpp:4:21: fatal error: gtk/gtk.h: no such file or directory
Now, I altered include line in main.cpp on target RPi, to this:
#include <gtk-3.0/gtk/gtk.h>
And now its missing <gdk/gdk.h>! When this change is made on host windows device - same result, but in VS.
As I dealt with similar problem in VS, upon setting links for IntelliSense (now apparently they're for this purpose), now probably similar dependencies have to be set somewhere on Raspbian. But where?
EDIT2
Upon execution of:
g++ main.cpp -o Blink2onRPi `pkg-config --cflags --libs gtk+-3.0`
on target RPi there is no more GTK-related errors, just wiringPi (also present in project) undefined references. It raises two possible questions:
1) How can I setup wiringPi on RPi so that the project could be manually compiled on target and
2) How/where add above line to Visual Studio, so it execute remotely with all GTK dependencies added properly on target
Researching stock present wiringPi library (as this is Blink led example for cross-compile Linux Development) I've found, that in Project Properties/Linker/Input/Library Dependencies there is mysterious entry:
wiringPi
Just that, nothing more. After removing this entry, on compilation pops out same errors as before on target (which apparently lacks proper wiringPi setup) - undefined references (not mensioned any missing headers). Can this be relevant for the case? If so, how could I add there such entry which would deal with missing GTK dependencies?
TL;DR
Use screenshot below to know where to add pkg-config calls in VS configuration so that it forwards it to the compiler and linker on the target.
Thanks to #zaguoba for providing these.
ORIGINAL ANSWER:
The list of directories to include is provided by pkg-config. For example pkg-config --cflags-only-I gtk+-3.0 will give you the list of include directories required. Those are the ones you need to add to the directories where VC++ wil look at include files. If you add the relative path you use in the #include, to one of those paths, you are able to find the file.
Example:
If you add to the directories C:\Program Files\foo\bar\gtk+-3.0
and have in your C file:
#include <gtk/gtk.h>
then the compiler will look for C:\Program Files\foo\bar\gtk+-3.0\gtk\gtk.h.
EDIT:
This all means the 'file not found' errors are because you're really building on the target and the target has no idea what C:\Program Files\... means. Those should be paths on the target filesystem, where the compiler is called. And this is exactly what pkg-config provides.
The copy of those files on the Windows machine filesystems is merely for Intellisense use, not for compiler use.
EDIT 2:
So that's that Visual Studio 2017 Community Linux Development plugin is what need to be undestood. It's not for cross compilation from Windows to Linux, istead it merely synchronizes code to the Windows host (for Intellisense use), but builds on the target. This means that all the paths and commands are Linux paths and commands, run on the target.
Here's the OP working configuration:
With that setup, you should
#include <gtk\gtk.h>
instead of
#include <gtk-3.0\gtk\gtk.h>
Alternatively remove all those VC++ directories/Header files directories, and just keep one of them that ends with include/ instead of listing up all the sub directiores.
I'm using Code::Blocks for a project. I have not used an IDE on Linux in years, so I'm a bit out of touch with Linux IDEs.
I'm working with an OpenSSL project that uses FIPS validated library. I duplicated the GCC compiler toolchain and modified it to use OpenSSL's fipsld (and set it as default).
When the project's code executes under Code::Blocks via F8, FIPS_mode_set fails with error 252104805 (0xF06D065). 0xF06D065 is:
$ openssl errstr 0xF06D065
error:0F06D065:common libcrypto routines:FIPS_mode_set:fips mode not supported
which tells me Code::Blocks is not using the OpenSSL I specified in /usr/local/ssl/lib. Rather, the program is using the non-FIPS library provided by Debian in /usr/lib/x86_64-linux-gnu/.
An image of the link library settings is below. Note that the libraries are fully specified, and nothing is left to chance.
CodeBlocks is clearly doing things with LD_LIBRARY_PATH (shown below).
I've also verified the project is using the correct search directories - /usr/local/ssl/include for headers and /usr/local/ssl/lib for the linker.
With compiler logging set to "Full Command Line" set, here's what I get from the build log:
-------------- Build: Debug in ac ---------------
Compiling: main.cpp
/home/jwalton/Desktop/ac/main.cpp:8:5: warning: unused parameter ‘argc’ [-Wunused-parameter]
/home/jwalton/Desktop/ac/main.cpp:8:5: warning: unused parameter ‘argv’ [-Wunused-parameter]
Linking console executable: bin/Debug/ac
Output size is 569.67 KB
Process terminated with status 0 (0 minutes, 0 seconds)
0 errors, 2 warnings
I'm aware of Basile Starynkevitch's suggestions on rpath's and LD_PRELOAD tricks, but this seems like one of those things the IDE should be handling for me (Visual Studio will handle it properly, and even gives us an input box to set Working Directories to find additional libraries).
Any ideas how to make Code::Blocks use the shared objects in /usr/local/ssl/lib when executing the program under the debugger?
Your IDE instructs the compiler to link against the specified libraries, but not to load them at run time. For this latter thing to happen, you need to pass another option to the linker, namely
-rpath=/path/to/directory/with/your/libraries
or, if the linker is invoked by the compiler,
-Wl,-rpath=/same/thing
Code::Blocks don't use shared objects (DLL are a Windows thing). Because Code::Blocks is simply an IDE. IDEs are glorified source code editors with the ability to run external software development tools. You could (and sometimes you should, at least to learn how things happen) edit your code with a plain good editor like emacs, and build it with commands. Your IDE is just running commands, notably a compiler and a linker, probably using gcc
So what is using shared objects in /usr/local/ssl/lib/ is the compiler and linker (and the runtime dynamic linker). BTW, /usr/local/ssl/lib/ is a very strange name for a directory containing shared objects; you should have configured OpenSSL to be installed in /usr/local/lib/ !
First, I really believe you should reconfigure and recompile and rebuild and reinstall your SSL to get it installed under /usr/local/ (or perhaps /opt/) prefix (i.e. shared libraries in /usr/local/lib).
Then you could add appropriate options for the ld linker (from binutils). You probably want -L/usr/local/ssl/lib (to the gcc command which is running ld), and you may want to pass -Wl,-rpath (see this).
I would suggest to reinstall your SSL in /usr/local/, add /usr/local/lib/ into /etc/ld.so.conf (or at least into your LD_LIBRARY_PATH...) and run ldconfig
Otherwise, add at least /usr/local/ssl/lib/ in front of your LD_LIBRARY_PATH (and also -L/usr/local/ssl/lib/ to your linking command).
Read Program Library HowTo, the answers to this, and Drepper's How To Write Shared libraries paper.
Just open the terminal and type
export LD_LIBRARY_PATH=/path/to/your/libraries
sudo ldconfig