I have subscriptions that are failing to run giving the error:
Failure sending mail: An error has occurred during report processing.Mail will not be resent.
The report runs fine when requested manually through the server so I know the datasource and connection work.
Inside the SSRS database the only information I can get is from the ExecutionLogStorage saying:
rsProcessingAborted
The ExecutionLogStorage table also shows the TimeStart and TimeEnd being 1 second apart, on a report that takes 2+ minutes to run manually. The report has not failed a single time when running manually, only fails through the subscription.
The windows event viewer does contain some errors about a TERADATA extension but they do not coincide with the subscription failures.
The logs located in \Program Files\Microsoft SQL Server\MSRS10_50.Reporting\Reporting Services\LogFiles do not even contain an entry for that subscription during failure at all.
I'm not sure where to go for more information, I need to know why this subscription is failing, we have the workaround of manually running the report and manually emailing it out after converted to excel but that's not a viable solution going forward.
Some other places you could check are:
SSRS Log:
c$\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
You could try enabling verbose logging (level 4) here
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin\ReportingServicesService.exe.config
Look for this tag:
<switches>
<add name="DefaultTraceSwitch" value="4" />
</switches>
I'm fighting very similar issue but to make it a bit complex, my subscription fails only every other time or so and runs fine sometimes. So far I ruled out:
No. of parallel SSRS sessions
Memory pressure on DB server & Report
Server Kicking off the subscription directly vs remotely(running
the agent job)
Sorry, I do not have a good answer for you but this issue seems to bother more than few people.
Update:
I found out that the Subscription was a created by a windows user who is no longer valid (ID expired). Updating the Subscription owner fixed it.
-- List SSRS users (check to make sure the new Owner exists in this list)
SELECT *
FROM Users
WHERE UserName IN ('DomainName\_SSRSServiceAccount')
-- DFGRYH-DFGRYH--DFGRYH-DFGRYH
-- Identify the subscription whose ownership you would like to edit
SELECT *
FROM Subscriptions
WHERE OwnerID = 'DFGRYH-DFGRYH--DFGRYH-DFGRYH'
AND Description = 'Send e-mail to RichG#DomainName.com'
ORDER BY LastRunTime
,LastStatus
-- Update the Subscription with new Owner, the change should reflect on the SSRS reports
UPDATE Subscriptions
SET OwnerID = 'DFGRYH-DFGRYH--DFGRYH-DFGRYH'
WHERE SubscriptionID = 'B33A78FC-933D-47DB-AB50-43D36B24C0B8'
We are running into a few issues with our TFS installation (TFS 2013 Update 4, SQL 2014 Standard) as a result of email alerts. Most notably, Work Items cannot be created, because this triggers an email.
Any time a process or user attempts to create a Work Item, the error
TF30040: The database is not correctly configured. Contact your Team Foundation Server administrator.
is received. Further, when I check the Event Viewer on the server, I can see the error and it reports that the inner exception is:
Exception Message: The EXECUTE permission was denied on the object 'sp_send_dbmail', database 'msdb', schema 'dbo'. (type SqlException)
I have worked with the DBA and we have enabled Email Alerts on the server. We have verified that, in general, the alerts work by using the test button on the administration console. I can also set up a check-in alert through the web interface and receive said alerts without issue. This seems to be specifically affecting Work Item creation alerts (which apparently are just automatically and irrevocably enabled).
Presumably, we could correct this by giving appropriate permissions to use that stored procedure. To do so, we need to know what user to give permissions to. So far we have tried giving execute permissions to my AD user, the service account used by the build service, and the Network Service account (which appears to be the TFS Service Account).
There is no indication in any error message as to what user is being used to execute that procedure. So, my question: What SQL user is used to send alerts when creating Work Items?
Edit:
For the record, this started working of its own accord. We decided Monday to call Microsoft to get this fixed. Before that happened, failed builds magically created some work items (on Tuesday, a full day after we gave up), and we are now able to create work items. Everyone involved states not doing anything. We are baffled, but in a good way.
I'm going to advise you that a DBA should not be making changes to the TFS databases. I suggest opening a ticket with MSFT and getting assistance from the product support group.
I am trying to set up a merge replication using web synchronization between a publishing SQL Server 2012 standard and subscribing SQL Server 2012 Express. After following the instructions provided at Technet, I am stuck on this:
Source: Merge Process(Web Sync Server)
Number: -2147200985
Message: The subscription to publication 'MyMergePublication' has expired or does not exist.
I already verified that SSL certification are good, that I can browse to the publishing machine's URL https:\\mycomputer\replisapi.dll and get the expected output. I already verified that snapshot was set up and I took a giant hammer & use an administrator account to run the pool identity which is really bad security-wise but wanted to validate that it was not security that was tripping me up.
To further the mystery, when I try and fail to sync, the publisher acknowledges that a new subscriber has been registered, but it cannot get the snapshot at all and thus subscriber database is still empty.
On the replication monitor, there are no failed synchronization history, or any errors; all it has to say is that the subscriber is uninitialized, and no more.
Turning up the verbosity of the merge agent, I saw some sql being executed and tried replicating the sql and i found this was failing with same error:
{call sys.sp_MSgetreplicainfo(?,?,?,?,?,?,?,90)}
I called it with only the 3 mandatory parameters supplied and it would fail. That is despite the prior call sp_helpmergepublication does return a row for that publication. Oddly, the content of sp_helpmergepublication does not match what I configured for the subscription (e.g. it says web url is null when viewing the properties correctly shows the web url being set). Not sure that is significant.
The content of sp_MSgetreplicainfo contains a call to another system sprocs that I cannot run for some reason (says not found) so I'm not sure what is actually going on here.
Any clues would be greatly appreciated.
Have just deployed my Project on to my reporting Server.
I have multiple datasets which are referencing views which exist on the db on that server.
When I try to go into any report part I am getting this message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'dataset1'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Can anyone help?
I enabled remote errors to pinpoint the problem.
I identified that a column in a particular dataset (one of my views) was throwing an error.
So using a tool "SQL Delta", I compared the development version of the database with the live version on the reporting server. I noticed that one of the views had an extra column on the development server, that was not on the live version of the db.
SQL Delta generated the script I needed to run to update the view on my live db.
I ran this script, re-ran the report, everything worked.
I encountered a similar error message. I was able to fix it without enabling remote errors.
In Report Builder 3.0, when I used the Run button to run the report, an error alert appeared, saying
An error has occurred during report processing. (rsProcessingAborted)
[OK] [Details...]
Pressing the details button gave me a text box where I saw this text:
For more information about this error navigate to the report server
on the local server machine, or enable remote errors
----------------------------
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
I was confused and frustrated, because my report did not have a dataset named 'DataSet1'. I even opened the .rdl file in a text editor to be sure. After a while, I noticed that there was more text in the text box below what I could read. The full error message was:
For more information about this error navigate to the report server
on the local server machine, or enable remote errors
----------------------------
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
----------------------------
The execution failed for the shared data set 'CustomerDetailsDataSet'.
(rsDataSetExecutionError)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)
I did have a shared dataset named 'CustomerDetailsDataSet'. I opened the query (which was a full SQL query entered in text mode) in SQL Server Management Studio, and ran it there. I got error messages which clearly pointed to a certain table, where a column I had been using had been renamed and changed.
From that point, it was straightforward to modify my query so that it worked with the new column, then paste that modification into the shared dataset 'CustomerDetailsDataSet', and then nudge the report in Report Builder to recognise the change to the shared dataset.
After this fix, my reports no longer triggered this error.
Like many others here, I had the same error. In my case it was because the execute permission was denied on a stored procedure it used. It was resolved when the user associated with the data source was given that permission.
I experienced the same issue, it was related to security not being granted to part of the tables. review your user has access to the databases/ tables/views/functions etc used by the report.
The solution for me came from GShenanigan:
You'll need to check out your log files on the SSRS server for more detail. They'll be somewhere like: "C:\Program Files (x86)\Microsoft SQL Server\MSRS10_50.DEV\Reporting Services\LogFiles\"
I was able to find a permissions problem on a database table referenced by the view that was not the same one as the where the view was. I had been focused on permissions on the view's database so this helped pinpoint where the error was.
I just dealt with this same issue. Make sure your query lists the full source name, using no shortcuts. Visual Studio can recognize the shortcuts, but your reporting services application may not be able to recognize which tables your data should be coming from. Hope that helps.
I had the similar issue showing the error
For more information about this error navigate to the report server on
the local server machine, or enable remote errors Query execution
failed for dataset 'PrintInvoice'.
Solution:
1) The error may be with the dataset in some cases, you can always check if the dataset is populating the exact data you are expecting by going to the dataset properties and choosing 'Query Designer' and try 'Run', If you can successfully able to pull the fields you are expecting, then you can be sure that there isn't any problem with the dataset, which takes us to next solution.
2) Even though the error message says "Query Failed Execution for the dataset", another probable chances are with the datasource connection, make sure you have connected to the correct datasource that has the tables you need and you have permissions to access that datasource.
In my situation, I created a new SSRS report and new stored procedure for the dataset. I forgot to add the stored procedure to the database role that had permission to execute it. Once I added the permissions to SQL database role with EXECUTE, all was fine!
The error message encountered by the user was "An error occurred during client rendering. An error has occurred during report processing (rsProcessingAborted). Query execution failed for dataset "DataSet1'. (rsErrorExecutingCommand) For more information..."
Very grateful I found this great post. As for my case, the user executing the stored procedure did not have EXECUTE permissions. The solution was to grant EXECUTE permissions for the user within the stored procedure by adding below code to the end of the stored procedure.
GRANT EXECUTE ON dbo.StoredProcNameHere TO UsernameRunningreports
GO
I also had a very similar issue with a very similar error message. My issue was that the database could not be connected to. In our case, we have mirrored databases and the connection string did not specify the Failover Partner. So when the database couldn't connect, it never went to the mirror and was throwing this error. Once I specified the Failover Partner in the connection string for my datasource, it resolved the issue.
BIGHAP: A SIMPLE WORK AROUND FOR THIS ISSUE.
I ran into the same problem when working with SharePoint lists as the DataSource, and read the blogs above which were very helpful. I had made changes in both the DataSource and Data object names and query fields in Visual Studio and the query worked in visual Studio. I was able to deploy the report to SharePoint but when I tried to open it I received the same error.
I guessed that the issue was that I needed to redeploy both the DataSource and the DataSet to SharePoint so that that changes in the rendering tools were all synced.
I redeployed the DataSource, DataSet and the Report to sharePoint and it worked.
As one of the blogs stated, although visual studio allowed the changes I made in the dataset and datasource, if you have not set visual studio to automatically redeploy datasource and dataset when you deploy the report(which can be dangerous, because this can affect other reports which share these objects) this error can occur.
So, of course the fix is that in this case you have to redeploy datasource, dataset and Report to resolve the issue.
I was also facing the same issue - I checked below things to fix this issue,
If you have recently changed pointing database-name in data-source
then first check that all the store procedures for that report exist
on changed database.
If there are multiple sub reports on main report then make sure each
report individually running perfectly.
Also check security panel - user must have access to the databases/
tables/views/functions for that report.
Sometimes, we also need to check dataset1 - store procedure. As if you are trying to show the report with user1 and if this user doesn't have the access(rights) of provided (dataset1 database) database then it will throw the same error as above so must check the user have access of dbreader in SQL Server.
Also, if that store procedure contains some other database (Database2) like
Select * from XYZ inner join Database2..Table1 on ... where...
Then user must have the access of this database too.
Note: you can check log files on this path for more details,
C:\Program Files\Microsoft SQL Server\MSRS11.SQLEXPRESS\Reporting Services
I got same error but this worked and solved my problem
If report is connected to Analysis server then give required permission to the user (who is accessing reporting server to view the the reports) in your model of analysis server.
To do this add user in roles of model or cube and deploy the model to your analysis server.
Using SSRS, Report Builder 3.0, MSSQL 2008 and query to an Oracle 11G database,
I found that the oracle stored procedure ran well, produced consistent results with no errors. When I tried bringing the data into SSRS, I got the error as listed in OP's query. I found that the data loaded and displayed only if I removed the parameters (not a good idea).
On Further examination, I found that under dataset properties>parameters I had set the start date to parameterName P_Start and parameter Value to #P_Start.
Adding the Parameter value as [#P_Start] cleared the problem, and the data loads well, with parameters in place.
This problem was caused by an orphaned SQL Login. I ran my favorite sp_fixusers script and the error was resolved. The suggestion above to look at the logs was a good one...and it led me to my answer.
This might be the permission issue for your view or store procedure
In addition to the above answers, it could be due to a missing SQL stored-procedure or SQL function. For example, this could be due to the function not migrating from a non-prod region to the production (prod) region.
Removing all comments from the Select Query fixed this for me. My dataset was working in the Preview but when I went to Design/Query Designer and and tried the query there I was getting ORA-01006;bind variable does not exist. After removing all comments from the select it worked.
I have two databases, production and stage. I am getting the error message in the title of this post when I click "Database Diagrams" for production, but on stage I don't get an error.
I've researched this message, and I've found posts such as this:
Link
They pretty much say to change the owner of my database to sa. I'm not convinced this is the issue, though, because both production and stage databases have the same owner (not sa), but I only get this error for production.
Does anyone else know how else to resolve this error message?
both production and stage databases
have the same owner (not sa), but I
only get this error for production.
That usually is the very source of the problem: a database created on one machine is restored on a different machine where the SID of the original creator is no longer valid. Change the owner to a valid one:
ALTER AUTHORIZATION ON DATABASE::[<dbname>] TO sa;
I received this error. In my case, I had existing Diagrams but could not view them on account of this error. I remembered that I had changed the name of the server a week or so ago. After renaming the computer, SQL Server (2012) apparently correctly began using the correct underlying local user object in the Logins section of Security. So, from appearances, the database had a valid owner. But the name of the security account wasn't changed - the username of the owner was correctly localputer\localuser but the SQL account name was local-puter\localuser (the original name of the server). I renamed the account name to localputer\localuser and everything went back to normal. I did not need to issue an ALTER AUTH ON DB.