I am trying to do some assembly coding, I call the functions from C language. The code itself runs fine, but I have two enormous problems that I cannot to tackle for quite a long time now. First of them is syntax-highlighting - I installed two different (one at the time) asm highlighting extensions to visual studio 2015 enterprise, both of them didn't work. Before I installed the 2015 version I had 2013 Ultimate and the highlighting worked fine there. I tried to delete specific files responsible from registry etc but it didn't help me achieve absolutely anything. Tried to reinstall or update the extensions is well.
Another problem I have is something that pretty much started happening for first time 3 hours ago, in a solution when I have an asm file it is fine, I can edit it freely, run it, whatever. But once I switch off visual studio and run it again in the moment when I try to open the asm file in visual studio the file is no longer in clean assembly but in OP codes written in hexadecimal and along it there is list of the memory cell in which each op is in... When I make new asm file in the solution it is fine but once I restart visual studio same thing happens. I tried to look through all the common options in the top menu bar but there seems not to be anything helpful to me in this situation....
Desperately I tried to google both of those things (first one for quite extended period of time) but it seems like some of the problems I have encountered could possibly be related to 2015 enterprise version of visual studio :(
EDIT// OK I MANAGED TO FIX THE SECOND PROBLEM - right click the .asm file and use Open With and choose another editor!!!
Help please ;(
AsmDude will not work when .asm files are associated with an editor (see this issue here). If you still experiencing problems with AsmDude, consider opening an issue on Github. I'm happy to help you there.
I cannot get XAML Edit & Continue (WPF) working.
I have Visual Studio 2015 Update 2, so it should work as mentioned here:
https://blogs.msdn.microsoft.com/visualstudio/2016/04/06/ui-development-made-easier-with-xaml-edit-continue/
However, after any change in XAML source (font size, colors, directly or in resource,...), change is not applied real time.
I am on Windows 7, latest .NET Framework. I must be missing something.
OK, I found this in a comment from Dante Gagne (Program Manager # Microsoft) from the link in your question.
I have VS2015 Professional Update 2 and was wondering what was going on.
I apologize for the confusion. Edit & Continue is ONLY available in the Visual Studio “15” Preview. The feature is one that we’re still working on, but we didn’t feel was ready for the “RTM” branch yet. That means that Edit & Continue will not work in Visual Studio 2015.
Additionally, if you are working with a Universal Windows Platform
project (UWP), you need to be using the Windows Insider build 14295 or
later along with the Windows Insider SDK build 14295 or later.
If you’re meeting this criteria and still can’t get it to work, PLEASE
get in touch with me and I’ll see if I can help.
His contact details are in the link from your question.
Posted again here
Update 6/23/2016
Visual Studio 2015 is going to have an Update 3 after all. However, As of the current RC, I do not see any plans for xaml edit and continue. See Visual Studio 2015 Update 3 RC
Update 8/12/2016
As Legends mentioned in his comment VS2015 Update 3 does NOT have XAML Edit and Continue. Looks like we're going to have to wait until VS "15" is released. I'll update again if I see Microsoft put a release date out.
Update 5/10/2017
VS2017 is out and I believe that is the version where this is supported. Probably no more updates from here on out.
Another couple reasons :
You may be in a Release build. It will let you edit but won't apply changes due to optimizations.
Your installation may be corrupt. If you don't see XAML listed under Text Editors - that could be the sign of an incomplete install.
See VS2017 RC1 Installation installation error - Microsoft.PortableLibrary.TargetingPack.Msi failed - No XAML
for more details on how I fixed a corrupt install.
Make sure you're not just being stupid and accidentally reopening the old VS2015 after a crash too :-) They look very similar.
I have been working on a particular solution for a few months now without any problems. The last thing of significance that I remember doing was refactoring the name of a custom control inheriting from RichTextBox. I don't know if that is related to the problem but it seemed to be when the problems started occurring. For some reason now when I show the main form in design view and save any changes I get the message "Visual Studio has stopped working blah blah" and it restarts.
I seem to be able to load and make changes to other solutions ok.
So far I've tried:
Deleting .sln and v12.sln files
Have tried uninstalling NuGet. (I don't have any extensions other than NuGet and Visual Studio Extensions for Windows Library for JavaScript)
I don't have resharper
I have tried to start in /SafeMode but I keep getting the error "'Visual Studio Component Model Host Package' package did not load correctly". I can't seem to load any solutions in SafeMode.
Repaired VS2013 installation twice
Restarted my computer many times
Tried writing a log file using /log switch but can't really understand how to interpret it.
Any pointers would be very welcome.
Configuration:
Windows 7, 64 bit
Microsoft Visual Studio Professional 2012 RC Version 11.0.50522.1
RCREL
Running VS in administrator mode
The VS solution contains a web
application, with target: .NET Framework 4.
When I press F5, the solution builds... and nothing else happens.
Happens with both IIS or the VS Dev Server.
Happens with Platform Target of "Any CPU" or "x86"
If instead, I use the Debug / Attach to Process... menu, after a few seconds, I get:
"Debugger is Busy" - Debugger is performing a remote operation that is taking longer than expected. This dialog stay until I click "Terminate" and confirm it.
Then this dialog appears:
"Microsoft Visual Studio"
"Unable to connect to the Microsoft Visual Studio Remote Debugging Monitor named [COMPUTER NAME]. The network connection to the Visual Studio Remote Debugger has been closed."
After clicking OK, the 'normal' "Attach to Process" window finally shows up. In it, the list of "Available Processes" is empty.
Any suggestions or clues?
The main points that I wonder about:
Why is the list of processes empty? It is not surprising that the debugger does not work if it cannot see any processes.
Why is it trying to do "remote" debugging, when it is just accessing the local computer?
(Cross posted on social.msdn)
I had the same problem in VS 2012 (not the RC, but the final release) using a VS 2010 project. It would build fine, but the debugger would not start. So, I modified the solution file:
Changed "Format Verion 11.00" to "Format Verion 12.00"
And changed "# Visual Studio 2010" to "# Visual Studio 2012"
It's a workaround for now until my company upgrades its projects to VS 2012.
I've got a similar setup and I'd followed all the suggestions here and on Microsoft Connect - none of which worked for me. The only thing that did work was renaming MSVSMON.EXE in the x64 folder to MSVSMON.EXE.OLD and copying in the file from the x86 folder in it's place. I'm not sure if there are any other implications in doing this but it seems to have solved the problem in my case.
I eventually resolved this problem by deleting the msvsmon*.* entries in the \Windows\Prefetch folder. After doing so I could debug normally.
Ultimately, a Repair of the VS2012 resolved this issue for me. I followed the advice found at your social.msdn cross-post without any resolution (Devenv.exe /SafeMode /ResetSettings /ResetSkipPkgs and /Setup). Like you, my solution (VS 2010 SP1) also has a web application (targeting .NET 3.5), and the startup project is set to a winforms app. The ASP.NET development server did not start, nor did the app I was trying to debug.
Note that this issue was also posted to Connect at this link (by you?). If anyone else sees this issue, the Connect folks are requesting running the Microsoft Visual Studio 2012 Feedback Tool to collect data. As I started the Repair process prior to finding the Connect issue, I did not and was not able to provide feedback to MS with logging.
Seen a similar issue when running both Visual Studio 2010 and Visual Studio 2012 at the same time. Closing Visual Studio 2010 allow the debugger to start working in Visual Studio 2012.
I had the same issue - starting debugger just told me what a good job it had made of the build and the decided that that was enough.
I feared the worst, but luckily for me a reboot fixed the problem.
I know that this is therefore a pretty useless post in as far as offering help to anyone suffering with this issue, but I thought it was worth noting the point as it shows a) another person with the same problem so please fix it MS, and b) that sometimes a reboot fixes it so maybe that tells the maintainers something.
If you are opening a VS 2010 project with the new VS 2012 version it's probably your bin and obj folders that are causing the problem,deleting them solved the problem for me.Or you could clean your solution but I preferred manual deletion.
I just closed and reopened VS. This seemed to fix my problem
On another computer, with the RTM of Visual Studio 2012, I opened an older project and found that I could not press F5 to start the application. All that seemed to happen was a message in the status bar on the bottom edge of the window: "This item does not support previewing".
This solution had two projects, and the correct one was bold in the Solution Explorer, presumably indicating that it was the startup project.
However, after selecting the project and choosing "Set as Startup Project" in the context menu, I was then able to use F5 to run and debug it.
It turns out that the "This item does not support previewing" was nothing to do with the problem, but is a message that shows on the status bar whenever the item just selected in the Solution Explorer does does not support previewing.
For what it's worth, I found that I received this error message when I had an entry missing in my hosts file. I am using local domain aliases and the one I was trying to debug with wasn't in hosts. Adding the missing entry solved the problem for me.
Just copy all dte*.olb files, from C:\Program Files (X86)\Common
Files\Microsoft Shared\MSEnv to C:\Program Files X86\Microsoft Visual
Studio 9.0\Common7\IDE.
From https://mycodepad.wordpress.com/2013/12/07/visual-studio-2012-4-run-as-administrator-the-application-cannot-start-error/
Just my two cents,
I have experienced this issue twice now and it turns out after all of the suggestions I tried, it was BitDefender on my local machine that was doing this. So my fix for this problem is to try adding in exceptions to the local security software into the firewall and AV parts of it. Tell it to ignore the msvsmon.exe and devenv.exe altogether and see what difference that makes.
Otherwise try ripping it off altogether and see if the it lets you debug your solution.
You can see here for more info: http://forum.bitdefender.com/index.php?showtopic=37028
I installed the latest BitDefender version and all was fine for me.
I personally encountered some comparable problem: Visual Studio 2010 did not begin debugging but froze.
When I clicked VS it displayed a "Wait some more" or "Switch to" message box which didn't help me.
Using a task manager I could kill the *.vshost.exe process which brought VS back to life but aborted the debugging. Launching the program without debugging started the application instantly.
Solution:
Disable the indexing service for your code directories! Either deactivate the index service or uncheck the folders in the Indexing Service control panel.
Had this problem for a C++ application. Looking at the devenv.exe events in ProcMon pointed me to it trying to load a Visual Assist configuration file, which I had in my disk cleanup zeal accidentally deleted. Removing and then installing the extension again fixed it for me.
I have fixed the same issue by checking off the "Enable the Visual Studio hosting process" option from the start-up project Properties->Debug - Enable Debuggers options
All you have to do to fix this is go "Project > Set as StartUp Project" then hit F5 or the debug button and it will work!!!
I had VS2010 running fine with Silverlight development. Then I installed Expression Blend 4. Now when I run VS2010 and try to debug a silverlight app I get an error saying "Unable to start debugging. The silverlight developer runtime is not installed. Please install a matching version." I've tried uninstalling silverlight tools, and reinstalling them from scratch (the latest april version). But I still get the same message. So basically I'm now unable to do VS2010 SL development. I'm on the verge of just rolling back to my last system restore point and giving up on Blend. But if I do that I'd be worried that Product Activation would never allow me to reinstall it in the future, since the MSDN download page implies I'm only ever allowed to install it on a single machine. Any help appreciated.
Thanks
I had the same problem after installing Expression Studio 4. I installed the Developer version of Silverlight at: http://go.microsoft.com/fwlink/?LinkID=188039
and the problem seems to be resolved.
Hope that helps.
Try reinstalling or reparing the Silverlight_Tools for Silverlight 4.
You tried that.
The product activation system isn't that draconian it has to allow for things like hardware failures etc which would require re-installs.
Thanks for the suggestions. I solved it this way: Since I'm running under parallels, I rolled back to a snapshot taken before I'd installed Blend. Then I rebooted Windows. Then I reinstalled Blend (happily with no draconian activation problems!), and everything worked.
So why did it work the second time and not the first time? The first time I installed Blend, I'd shut down VS2010, explorer etc, but not rebooted. Perhaps some hidden VS-related process was still running. Installing Blend in that situation screwed everything up, and removing and reinstalling stuff didn't fix it. Obviously the Blend installer should have spotted the dangerous process and taken remedial action, but it didn't. Perhaps MS recommends you reboot before installing new software? That would be a bit of a nuisance, and I've never needed to before. My real lesson from this is to work in a VM and take regular snapshots.
Thanks again.