How to sum only consecutive duplicate numbers in order to find a unique value? for example, I have a vector
A = [0 0 0 0 1 0 0 0 1 0 1 1 0 0 1 0 1]
then when summing only consecutive duplicate numbers, I will have
B = [0 1 0 1 0 2 0 1 0 1]
finally the number of unique values different from 0 and 1 :
sum(B>1)
I know one way to solve the problem:
sum(diff(find(A==1))==1)
but it seems it is not a good method.
An alternative solution:
A = [0 0 0 0 1 0 0 0 1 0 1 1 0 0 1 0 1]
%// get Islands
a = cumsum(~A)
b = a(logical(A))
%// count occurences
c = histc(b,unique(b))
%// count number of occurences > 1
d = sum(c > 1)
%// or sum of occurences > 1
e = sum(c(c > 1))
c =
1 1 2 1 1
d =
1
e =
2
This will give you the total number of repeated values in the array including "0" values.
sum(A(1:end-1)-A(2:end)==0)
ans =
7
If you are interested only in the repeated "1" values, you can change it to
sum(A(1:end-1)+A(2:end)==2)
ans =
1
Note that this is the count of duplicates if you have [1 1 1] you'll get 2 not 1.
Related
I have a matrix B and I would like to obtain a new matrix C from B by adding its last w*a rows to the first w*a rows (w and a will be defined afterwards).
My matrix B is generally defined by :
I would like to obtain matrix C defined in a general way by:
The characteristics of matrices B and C are:
L and w are defined real values;
B0,B1,...,Bw are of dimension: a by b;
B is of dimension: [(L+w)×a] by (L×b);
C is of dimension: (L×a) by (L×b).
Example: For L = 4 and w = 2 I obtain the following matrix B:
The w*a = 2*1 = 2 last rows of B are:
The w*a = 2*1 = 2 first rows of B are:
By adding the two matrices we have:
The matrix C thus obtained is then:
For B0 = [1 0], B1 = [0 1] and B2 = [1 1]. We obtain :
B0, B1 and B2 are of dimension a by b i.e. 1 by 2;
B is of dimension: [(L+w )×(a)] by (L×b) i.e. [(4+2)×1] by (4×2) i.e. 6 by 8;
C is of dimension: (L×a) by (L×b) i.e. (4×1) by (4×2) i.e. 4 by 8.
The matrices B and C that I get are as follows:
B =
1 0 0 0 0 0 0 0
0 1 1 0 0 0 0 0
1 1 0 1 1 0 0 0
0 0 1 1 0 1 1 0
0 0 0 0 1 1 0 1
0 0 0 0 0 0 1 1
C =
1 0 0 0 1 1 0 1
0 1 1 0 0 0 1 1
1 1 0 1 1 0 0 0
0 0 1 1 0 1 1 0
I would like to have some suggestions on how to program this construction so that from a given matrix B I can deduce the matrix C.
Matlab's range indexing should help you do this in a few steps. The key things to remember are that ranges are inclusive, i.e. A[1:3] is a three 3x1 matrix, and that you can use the keyword end to automatically index the end of the matrix row or column.
%% Variables from OP example
w = 2;
L = 4;
B0 = [1 0];
B1 = [0 1];
B2 = [1 1];
[a, b] = size(B0);
% Construct B
BX = [B0;B1;B2]
B = zeros((L+w)*a, L*b);
for ii = 0:L-1
B(ii+1:ii+w+1, ii*b+1:ii*b+b) = BX;
end
%% Construct C <- THIS PART IS THE ANSWER TO THE QUESTION
% Grab first rows of B
B_first = B(1:end-w*a, :) % Indexing starts at first row, continues to w*a rows before the end, and gets all columns
% Grab last rows of B
B_last = B(end-w*a+1:end, :); % Indexing starts at w*a rows before the end, continues to end. Plus one is needed to avoid off by one error.
% Initialize C to be the same as B_first
C = B_first;
% Add B_last to the first rows of C
C(1:w*a, :) = C(1:w*a, :) + B_last;
I get the output
C =
1 0 0 0 0 0 1 1 0 1
0 1 1 0 0 0 0 0 1 1
1 1 0 1 1 0 0 0 0 0
0 0 1 1 0 1 1 0 0 0
0 0 0 0 1 1 0 1 1 0
I have a vector
Y = [1 1 0 0 0 1 1 0 1 0 1 1 1 0 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 1 1 0 0 0 1 0 0 0]
1 occurs 17 times
0 occurs 21 times
How can I randomly remove 0s so that both values have equal amounts, such as 1 (17 times) and 0 (17 times)?
This should also work on much bigger matrix.
Starting with your example
Y = [1 1 0 0 0 1 1 0 1 0 1 1 1 0 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 1 1 0 0 0 1 0 0 0]
You can do the following:
% Get the indices of the value which is more common (`0` here)
zeroIdx = find(~Y); % equivalent to find(Y==0)
% Get random indices to remove
remIdx = randperm(nnz(~Y), nnz(~Y) - nnz(Y));
% Remove elements
Y(zeroIdx(remIdx)) = [];
You could combine the last two lines, but I think it would be less clear.
The randperm line is choosing the correct number of elements to remove from random indices between 1 and the number of zeros.
If the data can only have two values
Values are assumed to be 0 and 1. The most common value is randomly removed to equalize their counts:
Y = [1 1 0 0 0 1 1 0 1 0 1 1 1 0 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 1 1 0 0 0 1 0 0 0]; % data
ind0 = find(Y==0); % indices of zeros
ind1 = find(Y==1); % indices of ones
t(1,1:numel(ind0)) = ind0(randperm(numel(ind0))); % random permutation of indices of zeros
t(2,1:numel(ind1)) = ind1(randperm(numel(ind1))); % same for ones. Pads shorter row with 0
t = t(:, all(t,1)); % keep only columns that don't have padding
result = Y(sort(t(:))); % linearize, sort and use those indices into the data
Generalization for more than two values
Values are arbitrary. All values except the least common one are randomly removed to equalize their counts:
Y = [0 1 2 0 2 1 1 2 0 2 1 2 2 0 0]; % data
vals = [0 1 2]; % or use vals = unique(Y), but absent values will not be detected
t = [];
for k = 1:numel(vals) % loop over values
ind_k = find(Y==vals(k));
t(k, 1:numel(ind_k)) = ind_k(randperm(numel(ind_k)));
end
t = t(:, all(t,1));
result = Y(sort(t(:)));
I want to place the binary equivalent number for each element side - by side i.e, the final matrix Concatenated_A would be of size m by nbits*n where [m,n] = size(A);
A = [5, 5, 4, 10, 4;
10, 10, 10, 10, 5;
];
I did an attempt but the result is wrong. I need help in correctly implementing the concatenation. Thank you
[m,n] = size(A);
numbits = 4;
for m = 1:M
Abin = dec2bin(A(m,:),numbits);
for j = 1:size(Abin,1)
Concatenated_A(m,:) = Abin(j,:);
end
end
For first row in A(1,:) = 5, 5, 4, 10, 4 ; its decimal conversion of each element would give a matrix as below.
0 1 0 1
0 1 0 1
0 1 0 0
1 0 1 0
0 1 0 0
Then, how can I do something like this :
Concatenated_A(1,:) = [0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0 0]
The above operation is repeated for every row in A.
You can transpose the result of dec2bin so that the binary representation goes down the columns and then reshape this into the desired shape so that each row is on it's own row. After reshaping, we take the transpose again so that the rows go across the rows again. Also we need to be sure to transpose A before we start so that we encode along the rows.
out = reshape(dec2bin(A.', numbits).', [], size(A, 1)).'
% 01010101010010100100
% 10101010101010100101
Or if you want a logical matrix instead you can compare your character array to the character '1'
out = reshape(dec2bin(A.', numbits).', [], size(A, 1)).' == '1'
% 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0 0
% 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1
I have a logical matrix A, and I would like to select all the elements to the left of each of my 1s values given a fixed distant. Let's say my distance is 4, I would like to (for instance) replace with a fixed value (saying 2) all the 4 cells at the left of each 1 in A.
A= [0 0 0 0 0 1 0
0 1 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 1 0 1]
B= [0 2 2 2 2 1 0
2 1 0 0 0 0 0
0 0 0 0 0 0 0
2 2 2 2 2 2 1]
In B is what I would like to have, considering also overwrting (last row in B), and cases where there is only 1 value at the left of my 1 and not 4 as the fixed searching distance (second row).
How about this lovely one-liner?
n = 3;
const = 5;
A = [0 0 0 0 0 1 0;
0 1 0 0 0 0 0;
0 0 0 0 0 0 0;
0 0 0 0 1 0 1]
A(bsxfun(#ne,fliplr(filter(ones(1,1+n),1,fliplr(A),[],2)),A)) = const
results in:
A =
0 0 5 5 5 1 0
5 1 0 0 0 0 0
0 0 0 0 0 0 0
0 5 5 5 5 5 1
here some explanations:
Am = fliplr(A); %// mirrored input required
Bm = filter(ones(1,1+n),1,Am,[],2); %// moving average filter for 2nd dimension
B = fliplr(Bm); %// back mirrored
mask = bsxfun(#ne,B,A) %// mask for constants
A(mask) = const
Here is a simple solution you could have come up with:
w=4; % Window size
v=2; % Desired value
B = A;
for r=1:size(A,1) % Go over all rows
for c=2:size(A,2) % Go over all columns
if A(r,c)==1 % If we encounter a 1
B(r,max(1,c-w):c-1)=v; % Set the four spots before this point to your value (if possible)
end
end
end
d = 4; %// distance
v = 2; %// value
A = fliplr(A).'; %'// flip matrix, and transpose to work along rows.
ind = logical( cumsum(A) ...
- [ zeros(size(A,1)-d+2,size(A,2)); cumsum(A(1:end-d-1,:)) ] - A );
A(ind) = v;
A = fliplr(A.');
Result:
A =
0 2 2 2 2 1 0
2 1 0 0 0 0 0
0 0 0 0 0 0 0
2 2 2 2 2 2 1
Approach #1 One-liner using imdilate available with Image Processing Toolbox -
A(imdilate(A,[ones(1,4) zeros(1,4+1)])==1)=2
Explanation
Step #1: Create a morphological structuring element to be used with imdilate -
morph_strel = [ones(1,4) zeros(1,4+1)]
This basically represents a window extending n places to the left with ones and n places to the right including the origin with zeros.
Step #2: Use imdilate that will modify A such that we would have 1 at all four places to the left of each 1 in A -
imdilate_result = imdilate(A,morph_strel)
Step #3: Select all four indices for each 1 of A and set them to 2 -
A(imdilate_result==1)=2
Thus, one can write a general form for this approach as -
A(imdilate(A,[ones(1,window_length) zeros(1,window_length+1)])==1)=new_value
where window_length would be 4 and new_value would be 2 for the given data.
Approach #2 Using bsxfun-
%// Paramters
window_length = 4;
new_value = 2;
B = A' %//'
[r,c] = find(B)
extents = bsxfun(#plus,r,-window_length:-1)
valid_ind1 = extents>0
jump_factor = (c-1)*size(B,1)
extents_valid = extents.*valid_ind1
B(nonzeros(bsxfun(#plus,extents_valid,jump_factor).*valid_ind1))=new_value
B = B' %// B is the desired output
Given a 1*N matrix or an array, how do I find the first 4 elements which have the same value and then store the index for those elements?
PS:
I'm just curious. What if we want to find the first 4 elements whose value differences are within a certain range, say below 2? For example, M=[10,15,14.5,9,15.1,8.5,15.5,9.5], the elements I'm looking for will be 15,14.5,15.1,15.5 and the indices will be 2,3,5,7.
If you want the first value present 4 times in the array 'tab' in Matlab, you can use
num_min = 4
val=NaN;
for i = tab
if sum(tab==i) >= num_min
val = i;
break
end
end
ind = find(tab==val, num_min);
By instance with
tab = [2 4 4 5 4 6 4 5 5 4 6 9 5 5]
you get
val =
4
ind =
2 3 5 7
Here is my MATLAB solution:
array = randi(5, [1 10]); %# random array of integers
n = unique(array)'; %'# unique elements
[r,~] = find(cumsum(bsxfun(#eq,array,n),2) == 4, 1, 'first');
if isempty(r)
val = []; ind = []; %# no answer
else
val = n(r); %# the value found
ind = find(array == val, 4); %# indices of elements corresponding to val
end
Example:
array =
1 5 3 3 1 5 4 2 3 3
val =
3
ind =
3 4 9 10
Explanation:
First of all, we extract the list of unique elements. In the example used above, we have:
n =
1
2
3
4
5
Then using the BSXFUN function, we compare each unique value against the entire vector array we have. This is equivalent to the following:
result = zeros(length(n),length(array));
for i=1:length(n)
result(i,:) = (array == n(i)); %# row-by-row
end
Continuing with the same example we get:
result =
1 0 0 0 1 0 0 0 0 0
0 0 0 0 0 0 0 1 0 0
0 0 1 1 0 0 0 0 1 1
0 0 0 0 0 0 1 0 0 0
0 1 0 0 0 1 0 0 0 0
Next we call CUMSUM on the result matrix to compute the cumulative sum along the rows. Each row will give us how many times the element in question appeared so far:
>> cumsum(result,2)
ans =
1 1 1 1 2 2 2 2 2 2
0 0 0 0 0 0 0 1 1 1
0 0 1 2 2 2 2 2 3 4
0 0 0 0 0 0 1 1 1 1
0 1 1 1 1 2 2 2 2 2
Then we compare that against four cumsum(result,2)==4 (since we want the location where an element appeared for the forth time):
>> cumsum(result,2)==4
ans =
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 1
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
Finally we call FIND to look for the first appearing 1 according to a column-wise order: if we traverse the matrix from the previous step column-by-column, then the row of the first appearing 1 indicates the index of the element we are looking for. In this case, it was the third row (r=3), thus the third element in the unique vector is the answer val = n(r). Note that if we had multiple elements repeated 4 times or more in the original array, then the one first appearing for the forth time will show up first as a 1 going column-by-column in the above expression.
Finding the indices of the corresponding answer value is a simple call to FIND...
Here is C++ code
std::map<int,std::vector<int> > dict;
std::vector<int> ans(4);//here we will store indexes
bool noanswer=true;
//my_vector is a vector, which we must analize
for(int i=0;i<my_vector.size();++i)
{
std::vector<int> &temp = dict[my_vector[i]];
temp.push_back(i);
if(temp.size()==4)//we find ans
{
std::copy(temp.begin(),temp.end(),ans.begin() );
noanswer = false;
break;
}
}
if(noanswer)
std::cout<<"No Answer!"<<std::endl;
Ignore this and use Amro's mighty solution . . .
Here is how I'd do it in Matlab. The matrix can be any size and contain any range of values and this should work. This solution will automatically find a value and then the indicies of the first 4 elements without being fed the search value a priori.
tab = [2 5 4 5 4 6 4 5 5 4 6 9 5 5]
%this is a loop to find the indicies of groups of 4 identical elements
tot = zeros(size(tab));
for nn = 1:numel(tab)
idxs=find(tab == tab(nn), 4, 'first');
if numel(idxs)<4
tot(nn) = Inf;
else
tot(nn) = sum(idxs);
end
end
%find the first 4 identical
bestTot = find(tot == min(tot), 1, 'first' );
%store the indicies you are interested in.
indiciesOfInterst = find(tab == tab(bestTot), 4, 'first')
Since I couldn't easily understand some of the solutions, I made that one:
l = 10; m = 5; array = randi(m, [1 l])
A = zeros(l,m); % m is the maximum value (may) in array
A(sub2ind([l,m],1:l,array)) = 1;
s = sum(A,1);
b = find(s(array) == 4,1);
% now in b is the index of the first element
if (~isempty(b))
find(array == array(b))
else
disp('nothing found');
end
I find this easier to visualize. It fills '1' in all places of a square matrix, where values in array exist - according to their position (row) and value (column). This is than summed up easily and mapped to the original array. Drawback: if array contains very large values, A may get relative large too.
You're PS question is more complicated. I didn't have time to check each case but the idea is here :
M=[10,15,14.5,9,15.1,8.5,15.5,9.5]
val = NaN;
num_min = 4;
delta = 2;
[Ms, iMs] = sort(M);
dMs = diff(Ms);
ind_min=Inf;
n = 0;
for i = 1:length(dMs)
if dMs(i) <= delta
n=n+1;
else
n=0;
end
if n == (num_min-1)
if (iMs(i) < ind_min)
ind_min = iMs(i);
end
end
end
ind = sort(iMs(ind_min + (0:num_min-1)))
val = M(ind)