I recently downloaded vim and I made a simple Hello World program in C. I installed clang after I saw that Gcc had errors on cmd. They both did. I also installed cygwin and tried cmd with both compilers and still nothing.
I keep on getting these errors
1 [main] clang 304 child_info_fork::abort: C:\cygwin\bin\cygLLVM-3.5.dll:
Loaded to different address: parent(0x1A10000) != child(0x1710000) clang:
error: unable to execute command: posix_spawn failed: Resource temporarily
unavailable
I think I have more hope for clang than for gcc
Short Answer: If your Cygwin installation is directly under your C: drive, shutdown Cygwin and try this command in the Windows command prompt:
C:\cygwin\bin\dash.exe -c '/usr/bin/rebaseall -v'
This is a Cygwin fork failure.
As noted in link above, one solution is to do a 'rebase':
Read the 'rebase' package README in /usr/share/doc/rebase/, and follow the instructions there to run 'rebaseall'.
According to the README:
Use the following procedure to rebase your entire system:
1. shutdown all Cygwin processes and services
2. start ash or dash (do not use bash or a terminal emulator like rxvt
or mintty). The easiest way to do this is to use Windows Explorer
and navigate to the top level of your cygwin installation, and
double-click ash.exe or dash.exe in the bin/ directory.
3. execute /bin/rebaseall (in the ash/dash window)
If you get any errors due to DLLs being in-use or read-only, then take the
appropriate action and rerun rebaseall. Otherwise, you run the risk of fork()
failing.
Related
Everytime I try to build and run a program, including the standard 'Hello world!' nothing happens, I get:
==== Program exited with exit code: 0 ====
Time elapsed: 000:00.000 (MM:SS.MS)
Press any key to continue...
At the bottom it says:
'ming32-make' is not recognized as an internal or external command, operable prgram or batch file.
I have Codelite version 16 on Windows 10. I also have MinGW installed to C: and have edited the Environment variables to include C:\MinGW\bin
However, in command prompt gcc --version shows me the gcc version in C:\Users\me> and not C:\MinGW
I don't know if this is relevant or not.
All the other results seem to suggest a compiler not found problem, but this does not seem to be my case. Thanks in advance.
This is what I have installed at the moment. Can I get 'make'from one of the other files?
The Installed files
Looks like you either don't have ming32-make.exe or it can't be found.
Also I notice you still use old MinGW. I would recommend switching to newer MinGW-w64 (which supports both Windows 32-bit and 64-bit).
The standalone build from https://winlibs.com/ does include ming32-make.exe, and since you can just unzip it (no installation needed) you can try it without removing the old MinGW. Just make sure you don't have anything in your PATH variable to avoid running programs from the wrong location.
ming32-make.exe is either not installed or can't be found on your Environment variable PATH.
No, there is no mingw32-make in that bin folder. When I used the Installer originally I only selected: mingw32-gcc-g++-bin although there were other bin files. Where can I get it?
mingw32-make is outdated.
See How to compile makefile using MinGW?
If you are having problems with mingw, I would recommend using MSYS2 or a package manager like Chocolatey.
Just get rid of the previous installation first. Not mandatory but prevents confusion and storage drain due to multiple copies of mingw.
To install MinGw using chocolatey, run cmd as admin and use
choco install mingw
For make
choco install make
What worked for me was also installing mingw32-base-bin from the Installer (see second option in image in the original question).
The installation tutorial I was following did not mention installing this.
I've decided to leave this here as an answer in case someone else runs into a similar problem.
MSYS is a good option for compilers in recent CodeLite or VS-Code installation. https://www.msys2.org/.
Once you downloaded the compiler using the following steps from the installer but still have the problem with the make then follow these steps:
Reopen the MSYS2 terminal from your windows if that is previously installed.
Run the command pacman -S --needed base-devel mingw-w64-x86_64-toolchain
You will be asked to select the option from the list. You should select the option which refers to mingw-w64-x86_64-make.
Once the installation is successfully done, then open CodeLite settings->Buid Settings and check your Make file location. If that is empty or showing an unknown location then click the three dots at the very right of that box. The browse and navigate to location or where you installed the make by pacman. In my case it is C:/msys64/usr/bin/make.exe.
Click Apply and Save.
Now it might be needed to create a fresh workspace and re-run your code.
Let me preface this, I am very new to linux and to working on a non-IDE based setup.
I am trying to debug a very simple C program using vs code version 1.55
I unloaded all modules beforehand, so vs code can load appropriate default gcc & gdb versions (which it did, GCC 8.2)
I am following the VS code getting started documentation for setting up and everything seems very straight forward until I try to debug.
I use the default settings as instructed, the file builds successfully but then I get the below
/usr/bin/gdb: symbol lookup error: /usr/bin/gdb: undefined symbol: PyUnicodeUCS4_FromEncodedObject
please note that I cannot rebuild python with ucs4 enabled as suggested in another thread as I have no root access. however I can change VS code version to an earlier one if this will help.
Thanks.
I think this issue is specific to my environment but I will post the answer anyway as it may face someone else.
So this for me was 2 separate issues:
First gdb doesn't start and second vs code can't start gdb.
To check if this is the case try to launch gdb from terminal (not vs code) by typing gdb in the terminal (after loading gdb if needed), I was receiving the error above
Solution to this part is this as T0maas thankfully suggested above
Steps for linux newbies:
ldd gdb (or /usr/bin/gdb) (with vs_code loaded)
from step one get the python library path
unload all modules
load gdb
LD_PRELOAD=<python path from 1>
bash -c "export LD_PRELOAD"
load vs_code
load gdb
After the above steps writing gdb in the terminal should start gdb
Part 2:
The rest of the problem was when I tried to launch debugging session through the GUI of vs_code (still produced the same error)
In the terminal (after loading gdb) type whereis gdb
For me this produced multiple directories the first of which was /usr/bin/gdb (this is the default used in vs_code launch.json)
Changing that directory in the launch.json file to a different one of the other directories solved the second part of the problem for me.
So I'm in terminal, and have a directory called CAPTURE on my desktop, I'm trying to run a program called 'testme'. I read that you need to have build-essential installed but I think that's only on Linux systems and I'm on a Mac so it wasn't necessary because it's already built in (I think). So, I navigated from ~ with:
cd Desktop/CAPTURE
Then, I tried running a bunch of different commands that I found while looking on the internet:
./testme
which returned zsh: exec format error: ./testme
xcode-select --install
which installed properly and I thought I could run the ./testme command but I got the same error as before. Then I tried navigating to the directory again and used
chmod +x ./testme
./testme
which also did not work. I've never run executables before so I really have no familiarity with these commands so they might be super wrong. If anyone can help me run the file properly, that would be much appreciated.
Since your question is tagged as C and Clang, and you are talking about build-essential, I will assume that you are attempting to build an application from source code.
Instead of build-essential, in macOS, you need Xcode. The Xcode CLI tools will work if the application is text-only or Curses, but you will need the entire Xcode IDE for any graphical application.
If running ./testme is telling you Executable format error is probably because it's a prebuilt executable, very likely a Linux ELF executable that will not run in macOS.
My suggestion is to try to build the software. Most C applications will build if you run make inside the directory. make is installed by default by Xcode. Other applications may need a third-party build system, such as CMake, but I do not know if that's the case.
I am very new to coding (trying to teach myself C). I have some experience with MatLab, but I understand it is very different from C. I have Windows 10 with the newest version of Visual Studio Code (VSC) with the Run Code Extension and git extension (not sure what git does, but VSC prompted me to install). I am now familiar with the text editor, but do not know how to compile/run my code (apologies if I'm butchering the terminology, again, a newby). One friend recommended I determine the location in which the desired text file is located, type "gcc filename.c", enter, type "./a.out", and then the program should run. (Said friend has a Mac and I supposed the execution commands are different?) Regardless, I encountered "Run Code" extension on my google adventures and follow the steps I've seen online, but I am still getting the error pictured.
I can see how this would be an especially basic question, but if anyone can offer assistance/advice, I would be extremely grateful!
Thanks, All.
Sandy
P.S. In case the image doesn't load/work for whatever reason, this is the error:
"'gcc' is not recognized as an internal or external command,
operable program or batch file."
Works perfect in Visual Code. You need the following:
C/C++ extension in Visual Code.
msys64 installed in C:\
Add path to msys64 bin folder in environment variable
Instructions:
https://marketplace.visualstudio.com/items?itemName=ms-vscode.cpptools
Important the msys64 path doesn't contain spaces so don't install it in Program Files.
You can search "Edit system environment variables" from the windows button, press button Environment Variables, and then add it as a System variable "Path". For me its located in
C:\msys64\mingw64\bin
Hey,,,
It will work for you I believe
Blockquote
First: open the link: https://www.msys2.org/
Go to the installation and download the installer .. install the exe file.
search mingw in windows search(windows start)
there is an app named--> MSYS2 MinGW {64/32}-bit
run it as administrator
Found command shell ---> type: pacman -Syu
Will ask you for some installation click on Y
Then again go to the same app MSYS2 MinGW {64/32}-bit and run as admin
and write--> pacman -Ss gcc (in shell that opend after click)
after clicking there will be bunch of things and now you have to care about your windows arch.. if it is 64 bit then write---> pacman -S mingw-w64-x86_64-gcc (and if its 32 you will find something like that where 64 will replaced by 32 in bunch of commands that are showing in your shell)
after executing this command gcc will be installed in your system to check write: gcc --version || g++ --version
After that to install the debugger write pacman -S mingw-w64-x86_64-gdb
to check write: gdb --version
**Every thing got installed in your system now find the mingW file or mysys2 file on C drive(whereever you r mingW file got saved) go the the minGW 64 || 32 accroding to your operating system there is a bin folder click on that and copy the path inside the bin folder and save it in environment variables path **
Blockquote
Enjoy vs code
My recommendation
You are on Windows right? So you can just install Visual Studio IDE (follow this tutorial). Which is better than vs code. This tutorial is for C++ but it works for C as well. Because C++ uses the same compiler as C but with some more things(simple explanation).
The solution for your problem
You are getting the massage 'gcc' is not recognized as an internal or external command, operable program or batch file because you do not have the gcc compiler installed on your computer. But if you want to install it, you can follow this tutorial. But I highly recommend you use Visual Studio IDE which I mentioned above.
Type gcc --version in the command prompt to check whether the C compiler is installed in your machine.
If it is installed then try adding gcc to the environment variables using this link:
https://www.youtube.com/watch?v=qLh84CmdBJ0
If it is not installed then install it using instructions using this link:
https://www.guru99.com/c-gcc-install.html
and then add it to the environment variables using the link above.
If it is installed and not recognized by VSCode then try to run VSCode from CMD by typing code in CMD.
I'm enrolled in a masters computer science course. The course is using C and the instructor wants us to use Cygwin to compile programs if we are using windows.
I've downloaded and installed Cygwin and I've ensured that I've installed the GCC compiler.
But I don't know where to go from here. I need to compile a single source file that has a basic include.
#include <stdio.h>
Lets assume the file is on my desktop (it is not, but for the sake of argument). How do I navigate to the desktop from the bash shell? I assume once I've navigated to the correct location in bash, I simply execute:
gcc myProgram.c -o myProgram
Update: Following different instructions posted below, I was able to compile the program; I thank you for that. But when I execute the resulting binary I get the following. How can I compile or execute this program so I don't get the error? Again, thank you.
This application has failed to start because cygwin1.dll was not found. Re-installing the application may fix this problem.
when you start in cygwin, you are in your $HOME, like in unix generally, which maps to c:/cygwin/home/$YOURNAME by default. So you could put everything there.
You can also access the c: drive from cygwin through /cygdrive/c/ (e.g. /cygdrive/c/Documents anb Settings/yourname/Desktop).
Regarding your updated question about the missing cygwin1.dll.
From the Cygwin terminal check,
ls /usr/bin/cygwin1.dll
If it is not present (I doubt that), your installation is not properly done.
Then, check your path with,
echo $PATH
This will give : separated list of paths. It MUST contain /usr/bin. If you find that missing add it with,
export PATH=/usr/bin:$PATH
Finally,
I hope you are using Cygwin from the cygwin terminal (the little green+black icon installed with Cygwin), or MinTTY (if you installed that).
And, you have not moved the compiled EXE to a different machine which does not have Cygwin installed (if you do that, you will need to carry the cygwin1.dll to that machine -- keep it in the same folder as the compiled EXE).
Just to summarize, here are some commands that navigate to a directory and compile code using Cygwin and Windows Vista:
Start a Cygwin shell.
At the prompt, use cd to change to the appropriate directory:
$ cd /cygdrive/c/Users/nate/Desktop
Use ls to list the files in the directory:
$ ls
prog.c
Use the gcc command to compile a file in this directory:
$ gcc prog.c -o prog
If you don't see any errors, you should be able to run the resulting program:
$ ./prog
Update:
For the "Cygwin1.dll not found" error, I like Nik's answer. You might also check out this related post about cygwin1.dll not found, which suggests adding c:\cygwin\bin\ to your Windows PATH.
There are instructions on how to change the Windows PATH variable for Windows XP, and on Vista I think it's similar.
Go to Control Panel -> System
Select Advanced System Settings
Click on the Advanced tab
Click on Environment Variables
Under System Variables, find the Path entry and click Edit
Add c:\cygwin\bin to the list, making sure to separate it from any previous items with a semicolon
Look for (that is, cd to)
/cygdrive/c/
that will usually be your C:\
Also look at Using Cygwin, the Lifehacker introduction (June/2006) and, this biomed page at PhysioNet.
Regarding the cygwin1.dll not found error, a solution I have used for at least 8 years is to add the Cygwin bin directories to the end of my %PATH% in My Computer -> Properties -> Advanced -> Environment Variables. I add them to the end of the path so in my normal work, they are searched last, minimizing the possibility of conflicts (in fact, I have had no problems with conflicts in all this time).
When you invoke the Cygwin Bash Shell, those directories get prepended to the %PATH% so everything works as intended in that environment as well.
When not running in Cygwin shell, my %PATH% is:
Path=c:\opt\perl\bin; \
...
C:\opt\cygwin\bin; \
C:\opt\cygwin\usr\bin; \
C:\opt\cygwin\usr\local\bin;
This way, for example, ActiveState Perl's perl is found first when I am not in a Cygwin Shell, but the Cygwin perl is found when I am working in the Cygwin Shell.
If you are not comfortable with bash, you can continue to work in a standard windows command (i.e. DOS) shell.
For this to work you must add C:\cygwin\bin (or your local alternative) to the Windows PATH variable.
With this done, you may:
1) Open a command (DOS) shell
2) Change the directory to the location of your code (c:, then cd path\to\file)
3) gcc myProgram.c -o myProgram
As mentioned in nik's response, the "Using Cygwin" documentation is a great place to learn more.
If you just do gcc program.c -o program -mno-cygwin it will compile just fine and you won't need to add cygwin1.dll to your path and you can just go ahead and distribute your executable to a computer which doesn't have cygwin installed and it will still run. Hope this helps
Windows path C:\src under cygwin becomes /cygdrive/c/src
Compiling your C program using Cygwin
We will be using the gcc compiler on Cygwin to compile programs.
1) Launch Cygwin
2) Change to the directory you created for this class by typing
cd c:/windows/desktop
3) Compile the program by typing
gcc myProgram.c -o myProgram
the command gcc invokes the gcc compiler to compile your C program.
You might be better off editing a file inside of cygwin shell. Normally it has default user directory when you start it up. You can edit a file from the shell doing something like "vi somefile.c" or "emacs somefile.c". That's assuming vi or emacs are installed in cygwin.
If you want to file on your desktop, you'll have to go to a path similar (on XP) to "/cygwindrive/c/Documents\ and\ Settings/Frank/Desktop" (If memory serves correctly). Just cd to that path, and run your command on the file.
Cygwin is very cool! You can compile programs from other systems (Linux, for example), and they will work. I'm talking communications programs, or web servers, even.
Here is one trick. If you are looking at your file in the Windows File Explorer, you can type "cd " in your bash windows, then drag from explorer's address bar into the cygwin window, and the full path will be copied! This works in the Windows command shell as well, by the way.
Also: While "cd /cygdrive/c" is the formal path, it will also accept "cd c:" as a shortcut. You may need to do this before you drag in the rest of the path.
The stdio.h file should be found automatically, as it would be on a conventional system.
This file (cygwin1.dll) is cygwin dependency similar to qt dependency.you must copy this file and similar files that appear in such messages error, from "cygwin/bin" to folder of the your program .Also this is necessary to run in another computer that have NOT cygwin!