ImportError: libmysqlclient_r.so.16 - package

I have a problem in python 2.6. I am trying to
import MySQLdb
it will show me an error like
ImportError: libmysqlclient_r.so.16: cannot open shared object file: No such file or directory
I tried to search a lot but couldn't find anything.

reason behind this error is missing package for mysql
download a rpm file containing libmysqlclient_r.so.16 file and make sure that file is 32/64 bit architecture depending on your OS.
install package and all done.
hope it will work for you too.

Related

Problems compiling Traffic library

I attempted to install the Traffic library for the book "A Touch of Class" but was not able to compile the examples. EiffelStudio complained about a base2.ecf file.
Error code: VD00
General configuration parsing error.
What to do: fix the configuration file.
Could not open file: \base2.ecf
$EIFFELBASE2\base2.ecf
base2.ecf is found in where Windows installed Eiffel: C:\Program Files\Eiffel Software\EiffelStudio 18.11 GPL\unstable\library\base2.ecf The offending line of code seems to be this in the Traffic configuration files:
I have attempted to change this configuration file pointing directly to where the file is, using the actual path, to no avail.
Setting the variable EIFFELBASE2 might help:
set "EIFFELBASE2=C:\Program Files\Eiffel Software\EiffelStudio 18.11 GPL\unstable\library"
Then, EiffelStudio should be started from the environment where the variable is set.
(However, I wonder if this is the library to be used with the examples, or if there is another one that comes together with the examples.)

Python dbconnection

I have a python code(python 3.5.1) in which I need to connect to SQL server. I am using the module 'pyodc' but its throwing me an error
"ImportError: No module named 'pyodbc'"
I am using eclipse on Windows 8.
Then I downloaded pyodc package from "https://github.com/mkleehammer/pyodbc". I tried to install using pip first but its not working on Windows 8.1:
"building 'pyodbc' extension error: Unable to find vcvarsall.bat'.
Then I tried running setup.py file in the folder. But still i am not able to import pyodc module.
Can anyone help me in properly importing the module. I am very new to python and I know there might be some beginner mistake.

DocBlox error: The XSL writer was unable to find your XSLTProcessor

I am using WAMP on my local machine and I'm trying to use docblox to generate documentation for a project.
When i try to run the docblox command in my command prompt for a file that has the necessary comments, I get the error message.
C:\wamp\www\wm-ppclps>docblox run -f wm-ppclps.php -t documentation
DocBlox version 0.18.1
Starting transformation of files (this could take a while depending upon the size of your project)
ERROR: The XSL writer was unable to find your XSLTProcessor; please check if you
have installed the PHP XSL extension
I have no idea why this is error message is appearing. The command creates the documentation folder, parses the source code and it produces the structure.xml file. It just won't transform the structure into an HTML file or any other readable file.
I added the PHP install directory to my system path, I installed PEAR system wide, added PEAR install directory to my system path, installed DocBlox using the docblox pear channel, I have the necessary environment variables setup. I uncommented the php.ini line to enable the php_xsl.dll extension for WAMP and restarted WAMP. When I view the phpinfo, i see that the XSL extension is enabled (XSL version 1.1.23, compiled against libxml version 2.6.32, EXSLT enabled).
Does anyone have any idea why this is happening, has come across this problem or can point me in the right direction for an answer?
The error that you are receiving means that php does not recognize the xsl extension.
Php has got a separate ini file for CLI and web; and I presume that you have enabled the xsl extension for apache only.
You can verify this by executing php -i in your command prompt and check if the xsl extension is enabled there. If not then add your dll to the right config for your WAMP.

Problem installing Google App Engine from MSI

I downloaded Python and installed it, and when I go download GoogleAppEngine_1.2.0.msi and try to install it and I get this error:
This installation package could not be
opened. Contact the application
vendor to verify that this is a valid
Windows Installer package.
Am I forgetting something? I am assuming this is pretty simple.
I had the same error. The file downloaded by IE was about 190k and would not run. The file ought to be 2.7M. Firefox downloads correctly. Also IE will download correctly if you select RUN instead of SAVE. That is my experience and I now have the SDK installed. I hope this helps you.
Download it again and try to install the newly downloaded file. Maybe the file was damaged during download or not completely downloaded which can both happen sometimes.
If this does not help and the same error message appears you could control the checksum which should be
5ea87b8ed3011a5f55a9135c96abe96b6a6fd48b
for this file.
When you are sure that the downloaded file is ok, check if the version of your operating system is supported.
Maybe installing the Windows installer could help?
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4
If not, try out on another machine or inside a virtual machine.

aspnet_compiler ASPParse Could Not Load Type

I am unable to build my Web Application (not Web Site) in our build environement. We use DMAKE in our build environment (this unfortunately is non negotiable, therefore using MSBUILD is not permitted ) and when invoking the asp.net precompiler through
C:\Windows\Microsoft.NET\Framework\v2.0.50727\aspnet_compiler -d -nologo -p Site -f -fixednames -errorstack -v / Debug
We get the following error
error ASPPARSE: Could not load type 'X.Y.Admin.Site.Global
If I compile from the ide it is successful. If i then compile with aspnet_compilier it is successful. So i only get a successful compile with aspnet_compiler when the target dll i am trying to compile is in the bin of the web application i am compiling.
I keep running into postings that talk about solutions using MSBUILD which unfortunately I cant try.
Any help would be appreciated
We had the same problem on our web application:
error ASPPARSE: Could not load type '...'
The problem was that we had the file on disk (on the project folder) but it wasn't included in our application project (in the .csproj file). We solved the problem by including the file in the project :)
I ran into a similar problem using NANT. The trick was to compile the web applications code files into a dll then include that when using aspnet_compiler.
use the command line compiler,either csc.exe (c#) or vbc.exe (visual basic), to compile your web application with an output of type library. This will create a dll that you can use in your aspnet_compiler task
Have you tried specifying the path using -p? Sounds to me like it can't find that type / assembly.
http://msdn.microsoft.com/en-us/library/ms229863(VS.80).aspx
For web applications, you have to build the .vb files into a dll and put that in the bin folder before you run the aspnet compiler. Check the output window in visual studio and you'll see the command line for the VB compiler. Run that first before you run the aspnet compiler, and the asp pages should be able to find the missing types.
This problem was resolved for me by simply deleting all bin and obj folders. Seems like they were in a bad state somehow. I also deleted the the .sou file, but I don't think that was the issue.
I received the same problem.
I fixed it by copying my webapp's DLL from the OBJ/DEBUG folder to the BIN folder.
I just had this error and found 2 ways to fix it, either:
Change the Codebehind attribute in the global.asax file to CodeFile and add "partial" to the class declaration
In the deployment project's property pages, set "Version output assemblies" and provide a version number
I don't really know why either worked, but it did.
solution :
-p Site path must have the directory path of .csproj file location.
ex :-
aspnet_compiler -p D:\Projects\MGM\mgm\mgm -v / D:\Projects\MGM-deploy\mgm_compiled

Resources