Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about programming within the scope defined in the help center.
Closed 7 years ago.
Improve this question
I got the followng error
2015-05-13 12:04:31.00 Server Using locked pages for buffer pool.
2015-05-13 12:04:31.10 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-05-13 12:04:36.14 Server Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2015-05-13 12:04:36.17 spid7s Starting up database 'master'.
2015-05-13 12:04:36.30 spid7s Error: 9003, Severity: 20, State: 9.
2015-05-13 12:04:36.30 spid7s The log scan number (189:72:1) passed to log scan in database 'master' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
2015-05-13 12:04:36.30 spid7s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
Any idea how toresolve it ? I can't start sql server instance ?
If you tell us if you did something before this error message appeared it will be easier to help.
If you did an update, you can try folloying this KB article.
If it's not, you could try, as specified in this article, to run the following command as an Administrator in the SQL Server Setup location:
Setup /QUIET /ACTION=REBUILDDATABASE /INSTANCENAME=InstanceName
/SQLSYSADMINACCOUNTS=accounts [/SAPWD= StrongPassword][/SQLCOLLATION=CollationName]
Related
Im trying to load a database dump into my Sybase backup server.
Running sybase ASE-16_0 on both my primary and backup machine.
Import is done in isql cli via
load database DB from ./dumps/data_dump
Error message is the following:
Backup Server session id is: 22. Use this value when executing the
'sp_volchanged' system stored procedure after fulfilling any volume change
request from the Backup Server.
Backup Server: 4.141.2.40: [11] The 'open' call failed for database/archive
device while working on stripe device
'/opt/dumps/data_dump' with error number
13 (Permission denied). Refer to your operating system documentation for further
details.
Also found this SAP Knowledge Base article, but it's hidden behind a paywall:
https://userapps.support.sap.com/sap/support/knowledge/en/3140989
Setting up a new Server fixed the issue for me. Im still working on a possible answer for this problem.
I am having OLA hallengren job for the DBCC checks
When the job runs as per the schedule iam getting below error
The transient database snapshot for database XXXXX (database ID 8) has been marked suspect due to an IO operation failure.
In the error log log i can see below errors
The operating system returned error 665(The requested operation could not be completed due to a file system limitation) to SQL Server during a write at offset 0x00002fc8f40000 in file 'L:\MSSQL10_50.PSPAC01\MSSQL\DATA\XXXXX.ndf:MSSQL_DBCC10'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
The operating system returned error 665(The requested operation could not be completed due to a file system limitation) to SQL Server during a write at offset 0x00006a63e28000 in file 'R:\MSSQL10_50.PSPAC01\MSSQL\DATA\XXXXX.ndf:MSSQL_DBCC10'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
NOTE: But when i manually run the same job it is running fine
I have checked the DEFRAGMENTAION for both the drives but output is stating that "no need to do the defragmentation"
How can this issue be fixed, below is the link for the image
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
The server network address TCP://XXXX(Server Name):5023 can not be
reached or does not exist. Check the network address name and that the
ports for the local and remote endpoints are operational. (.Net
SqlClient Data Provider)
II am getting the above Error while doing mirror configuration.
Below are the steps I did for the Mirroring configuration.
Restored the fullback up to with no recovery option on secondary
server.
I tried restoring the Log backup (Error: RESTORE LOG is terminating
abnormally), hence I skipped the log restore.
I tired configuring the mirroring and got the success message for
mirroring configuration but when I start the mirroring my primary
database shows Primary/Synchronized where as my secondary server
shows in Recovery.
When I check the Sql ports in configuration manager it shows 1433 and
if I check tcp_endpoints it shows 5023.
Can you please help me to fix the Mirroring configuration.
I have tried Creating ENDPOINTS as-well and while creating PARTNER from Server A to B it is success but when i create partner from B to A it fails. I used below command:
ALTER DATABASE DBName
SET PARTNER ='TCP://XXX(Ip address):5023'
When I try to start the Sql Server (SqlExpress) service I got the following message:
I've looked at the log file (C:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG) and find out the following lines:
2010-03-09 06:12:35.51 spid7s Error: 824, Severity: 24, State: 2.
2010-03-09 06:12:35.51 spid7s SQL
Server detected a logical
consistency-based I/O error: incorrect
checksum (expected: 0x3ee24b20;
actual: 0x8d0681bd). It occurred
during a read of page (1:375) in
database ID 1 at offset
0x000000002ee000 in file 'C:\Program
Files\Microsoft SQL
Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf'.
Additional messages in the SQL Server
error log or system event log may
provide more detail. This is a severe
error condition that threatens
database integrity and must be
corrected immediately. Complete a full
database consistency check (DBCC
CHECKDB). This error can be caused by
many factors; for more information,
see SQL Server Books Online.
2010-03-09 06:12:35.51 spid7s SQL
Trace was stopped due to server
shutdown. Trace ID = '1'. This is an
informational message only; no user
action is required.
How can I solve it?
Thank you!
Sounds like your master mdf file (master database) is corrupted.
Options include:
1. Restoring from backup
2. Detach existing databases (if possible), remove, and reinstall.
You might want to look a little deeper to see why this happened. It might be a failing drive on that machine. In which case, your number one priority is going to be to fix the hardware.
Try DBCC with proper parameters (CHECKFILEGROUP). If that does not help.... try identifying whether the error is in an index (then you can recreate that).
Otherwise.... get the backups. You HAVE backups, or?? ;) (good test for those - could have been a real database, not just the mater)
As this is master...
...detach all databases, get a new master generated (if anything ails reinstall server), reattach databases.
I know this is an old question, this blog post helped me tremendously. Help this will benefit others who run into the same issue down the road.
You should read the article for detailed step-by-step process. But this is the key command.
DBCC CheckTable ('corrupted_table', REPAIR_ALLOW_DATA_LOSS)
My Dell pc failed;it was blue screen.I fixed that problem by formatting and reinstalling OS and other software that i have been using.Then I recoved my db designed using sqlserver 2005 and other files using recovery tools ;Easy Recovery 6.0.
The problem is : When I try to attach the recovered file(lpdb.mdf),It can not attached.The operation fails with the following message :
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'SAPC'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x4c093c91). It occurred during a read of page (0:0) in database ID 0 at offset 0000000000000000 in file 'F:\Recovered\lpdb_log.LDF'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. (Microsoft SQL Server, Error: 824)
Is there any who can help me?
I thank you!
Dejene.
Edit
By gbn from other closed question:
Hi mrdanny,
I tried the way you suggested me. The problem is unresolved.
Error is reported : Message One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
Is there an alternative solution that i should try? I am going to redesign the database.Please save my time!
Have you a good backup?
Given it says page (0:0), then I refer you to point 1
Use emergency mode and hope for the best. Paul Randall wrote DBCC CHECKDB...
The torn page is in the log file, so rename the log file and use the sp_attch_single_file_db procedure to attach the mdf and generate a new transaction log file.