Im looking to copy the printers from the users old workstation to the new workstation
I have tried the built in printbrm.exe but I need something that will work reliably and simply.
Are there any command line solutions that can do this or a sol;ution that that can be run from a batch file?
Thanks for reading
Confuseis
Related
For work I have to write a simple batch file to backup a directory as part of a maintenance routine. The PCs that need to have their directories backed up are running Windows XP Embedded 2002 SP2. These tools do not have the following command line utilities:
-copy
-xcopy.exe
-robocopy.exe
Is there any method of command line copy that is currently on XPe, if not, is there a 3rd party solution and how would I implement this?
Thank you in advance.
I'm not really sure why, if you can put new files on this machine running an embedded OS, why you wouldn't have just copied xcopy.exe over to it... Anyway, the program you want and is the best for copying large amounts of files/backups is XXCOPY. Check out www.xxcopy.com
I'm using psftp.exe to download files from the server. Is there an easy way to delete these files once I have downloaded them but leave the new ones that might have appeared on the server when I was downloading to be downloaded next time?
Here's my command line:
psftp.exe domain.com -i keys\private.ppk
get *.xml
Edit: I want to download the files from a Linux box to a Windows PC.
There's no easy way to do this with psftp. You would have to parse its output to find files that were successfully downloaded.
Though you can do this easily with WinSCP. Just use get -delete *.xml command.
Full WinSCP script would be:
open sftp://domain.com/ -privatekey=keys\private.ppk -hostkey=...
get -delete *.xml
exit
See an introduction to WinSCP scripting.
See also a guide for converting PSFTP script to WinSCP.
You can also have WinSCP GUI generate script like this for you.
(I'm the author of WinSCP)
Martin's answer is good. The below is more industrial.
Moving them to a staging area before the download may be prudent.
Generally you would move/rename the files on the server as a starting point. They are going to be deleted anyway so nothing should miss them? nor would you want to fall back over a recent file.
(so restart after this point in the event of a subsequent failure)
Then perform the download.
Then perform the delete.
I would approach the issue differently. Instead of deleting the file from the server, add the downloaded filename to a local table of "Already downloaded files". Then when you scan the FTP again for new files, ignore any that are in that table.
That way the next time you run your download script you only get the new files, but the old files remain on the server.
You could have another script that runs periodically and deletes all files over a certain age.
WINSCP is alright, and Martin (the author) drops in to practically every PuTTy thread to recommend it, but it's a fully GUI-based app and not for me. If you really need everything to be done on the commandline then WINSCP is often not an option.
I tried searching relevant threads, it didn't worked. So here are the detailed question / situation, where I am looking for help.
I have 30 client nodes where I have setup SVN and checked out two folders (which needs to be updated) exactly when I want (forcefully).. e.g : "d:\gbv\textures" and "d:\gbv\characters"
then I put svnUpdate.bat file in main d: drive with relevant command e.g: "svn update blabla"
if I run this bat file by double clicking, it works fine ( it updates )
now I thought, I should create a batch file, where I type all 30 nodes IP, and set of commands, to run that batch file from local d: and it should work.
PROBLEM: I am unable to do this.
because I am unable to do this, from my cmd panel.
because I am not sure, how I can access network pc and tell it to run "d:\svnUpdate.bat" from its drive from dos prompt. ( obviously, I can do this via win explorer visually ).
Hopefully the question will make sense.
You can execute files on remote machines in a network using PsExec. I use it to execute batch files and pass parameters to them.
You'll probably need the -w option to set the working directory.
Of course this is a lot easier with powershell remoting, but since you already set it up with batch, PsExec works fine.
Long story short... we have multiple servers which we run perflog monitoring on every night. My job is to convert these logs to .csv format and send them to my e-mail.
This bit it already automated via a .sh script an ex-employee wrote.
What I want automated is to run a batch job after the perfmon logging to look at a specific folder and find the latest .blg file and run the sh script on it (the script is called upload) so that I don't have to log in to each server and do it manually.
e.g.
upload myInitials cd /cygdrive/someLocation/logs/$latestFile$.blg
myInitials and the location can be hard-coded... I just wouldn't know how to find the latest file in the folder and automate it all via a batch file.
Any pointers would be very helpful!
# Jeremy:
Sorry, I probably should have mentioned in my question that the servers are running 2003 and 2008.
I don't think it would be absolutely necessary to register a change notification on the folder - If the log runs from noon till 7 in the morning, the script will run immediately after (you can set a script to run after a perfmon log has finished in log properties) so the log will almost definitely be the latest file in the folder anyway.
Like I said, I already have a .sh file in place to convert to csv and send to my e-mail, I just need to incorporate it into a batch file so that instead of me going to each of the servers and opening up cygwin and typing upload xx /cygdrive/location/logs/xyz.blg, I can have it automated to run straight after the log has finished without me having to RDC into it.
Thanks for the input!
If you have a Shell script and you job is to call the shell script from a windows batch file then this will work.This assumes the cygwin is installed in C:
Contents of start_cyg.bat
#echo off
set PATH=%PATH%:"C:\Cygwin\bin"
rem bash --login -i
bash "/cygdrive/d/cyg.sh"
Contents of cyg.sh
#!/bin/bash
TAIL=`ls -lrt | tail -1`
echo "TAIL:$TAIL"
If you call start_cyg.bat from windows command prompt you can get the output of the cyg.sh in the console
for getting newest file in a directory, ls -1tr | tail -1 should work.
First, I don't know if it would meet your requirements, but the Windows Task Scheduler 2 in Vista+ is very robust and can trigger an event even based on log entries. However, extraction and parsing of that log entry may require some scripting, and might have concurrency issues, even if that log entry did indicate the last used process. Chances are none of this is helpful, but just throwing it out there.
Programatically, it would be simple as you can register a change notification on a folder. When a change occurs, you go find the latest file. Then launch the batch file to launch your shell script, or whatever your desired sequence may be.
I think cygwin may even support change notification events via scripting, though I'm unsure. I believe there are linux extensions for this, but I may be wrong.
If it were me, I'd just write a little C++ app to do whatever I wanted.. but for you maybe any (or more likely none) of the above helps ;o.
I have a simple batch file as seen below that should extract a zip file to the root of E:. The zip file is valid and I can run the batch file from the command line just fine.
Instead of completing the task, it continues to inform me that the Status is "Running". The problem is, it is not running and the file never gets unzipped.
The task is running as a Domain Admin that has been specifically added as an Admin on the box.
Are there any known problems with using zip files in Scheduled Tasks. I actually have this same problem on 3 out of the 12 boxes this task runs on, but there is no rhyme nor reason as to why some servers work, and others don't.
Any ideas on how to debug what is going on, or a solution would be very helpful.
Here is the batch file I'm attempting to run.
SET RootPath=E:
SET WinzipLocation=E:\Program Files\WinZip
"%WinzipLocation%\winzip32" -e -o %CD%\TestZipFile.zip %RootPath%
Try to use the WinZip Command Line Support Add-on.
what if you use 7-zip in command line?
I realized after posting that the "bad" servers were all 64-bit. I was running the 32-bit version of winzip. Since the company I work for doesn't see the benefit in purchasing any software, I had no other option but to starting using 7-zip. I have not tested for any performance increases or hits, but I do not that it works, regardless of the environment.
Thanks for the answers, but it looks like without the 64-bit version of winzip....i have no other options.