I have some text coming in from a JSON file that looks like this:
[
{'text':'First text here', 'transition':'FadeIn', 'delay':1},
{'text':'Second text here', 'transition':'FadeIn', 'delay':2}
]
These text blocks should animate in, with a delay that is specified by the delay property and a transition specified with the transition property. I am using an ngRepeat. Originally I just used the enter/leave etc. on ngRepeat, but this text is bottom-aligned. When the second block comes in it shoves the first block up, which is not ideal.
What I want is something like:
<li ng-repeat="block in currentPage.textBlocks" ng-class="{block.transition:true, active:eventIndex>=$index}">block.text</li>
Note that I already have the model working to make this happen, and if I replace block.transition with 'FadeIn', it works. I'd really like to keep the ability to specify the transition through code, though, while solving the visual issue of the jumpy text.
OK, I can see the Internet is clamoring to answer this one, but imma stop you right there.
What worked for me is class="{{block.transition}}" ng-class="{active:eventIndex>=$index}"
Related
I previously used https://github.com/quilljs/quill/issues/1184#issuecomment-403657128 to make sure that no one can paste formatted text in the QuillJS editor, because I would like people to only use the few editing buttons that I enabled from QuillJs. Since then, it stopped working for me. My question is:
is this working for everyone else?
if no, do you know of an alternative?
One thing about https://github.com/quilljs/quill/issues/1184#issuecomment-403657128 that may behave different than you may have expected could be the 'silent'.
"APIs causing text to change may also be called with a "silent" source, in which case text-change will not be emitted. This is not recommended as it will likely break the undo stack and other functions that rely on a full record of text changes." [ https://quilljs.com/docs/api/#events ]
So if you expected to get the text-change event get emitted but do not get it, then change these two lines
this.quill.updateContents(delta, 'silent')
this.quill.setSelection(index, length, 'silent')
like this:
this.quill.updateContents(delta, 'user')
this.quill.setSelection(index, length, 'user')
Then the text-change event will get fired.
I was wondering whether there was a function in KDevelop similar to the one that we used to have in Quanta (miss you, Quanta, btw).
I would like to set a keyboard shortcut, and apply a text transformation upon hitting it. Example:
I select my text to be translated, and I get back: <?=_('my text to be translated'?>
As you can see, this saves me a lot of awkward keystrokes...
I only found this feature in PHPStorm (where it is called "Live Templates"). I defined it like this: <?=t('$SELECTION$')?> and I can call it by hitting CTRL+ALT+J, and select it from the dropdown that appears.
You should be able to do that using a snippet with the following text: <?=_('%{selection}'?>
And you can bind a Shortcut to a snippet.
However my tests showed that this doesn't work correctly - there seems to be a bug somewhere.
As alternative you can write a script that does insert the text. See the documentation.
I was watching some videos on Egghead.io about AngularJS. The creator of the videos uses Webstorm (and, I believe, works for them). One feature I noticed is that he can set different syntax highlighting within different scopes or quotation marks. So, in code like the following (from an AngularJS directive)
return {
template: '<div>something</div>',
// ^^^ these guys ^^^
}
...he can get the inside of the quotation marks to highlight as HTML.
I use Sublime Text 2, and am fairly wedded to it. Is there an existing feature/plugin for Sublime that could handle a case like this? If not, is something like this technically possible using the Sublime Text 2 API?
I don't think it's built in, but it's certainly possible. I've been doing some work with graphviz and wanted to do something similar. Labels can be generated with html like syntax. Anyways, I played around with the .tmLanguage file and added a new pattern to match the context where html like entries were valid (I look for label = <). The patterns I used for the captures aren't that good, but it works for fine for me. This give me the following, which I think is similar to what you are looking for.
I don't know anything about AngularJS, so I can't help you with anything specific to that, but it is certainly possible. Note that in the image below, the last <table></table> are just to show that highlighting doesn't occur there.
Edit:
Forgot to include this in the original post, but here is my updated tmLangauage file. That first pattern is what I added(link). I used PlistJsonConverter to go from JSON to plist, then saved the file as .tmLanguage. Hope this helps.
#skuroda is right, I implemented #skuroda's code with an additional plugin to easily edit HTML within an AngularJS directive JS file. The result is HTML syntax highlighting within a directive JS file and additional functionality to remove string related delimiters while editing templates.... Sublime AngularJS HTML Template Plugin
First time poster here, I'm a designer not skilled at all with php and I have a small issue I don't seem to be able to solve. I'm making a site in drupal 7 using a sub theme on zen.
Btw this is a great CMS, even though people say it's really more a developers CMS. I have no trouble to do what I need using views, rules, display suite etc. So a big thank you for all the developers out there making this such a good CMS. But for this apparently simple problem... no module will help me (I think) and I'm kinda stuck.
So here it is: I'd like to add a subtitle next to the title in all my pages.
So what I did was to add a custom field into the content type basic page (machine name: field_sub_title) which is a simple text field.
I uncommented the following line in my template.php
function mytheme_preprocess_page(&$variables, $hook) {
$variables['sub_title'] = t('field_sub_title');
}
Now my question is how do I load the content of my custom field into that variable?
I know i need to change the second part, but I don't have a clue as into what I need to change this.
Displaying the variable into the the page.tpl.php is something I know about so I only need help with the first part.
{EDIT}
Ok I found how to do this :)
I was looking for a solution in the wrong place. I don't need to change any thing in the template.php file.
Just needed to add this bit of code into my page.tpl.php:
<?php
print $node->field_sub_title['und'][0]['value'];
?>
So I'm posting this here for other Drupal newbies struggling with this....
Your solution may work for now, but there may be a more Drupal-y way to handle a problem like this. If you haven't noticed any problems yet, you may find one or more of the following issues down the road:
Someone who doesn't know php or Drupal theming may need to change the way this works.
If you're like me, you may forget where exactly in code this was implemented.
You may see superfluous markup and/or errors on nodes (content) that do not have this sub-title field (ie. event content not having a sub-title field while basic pages and news articles do).
When you add a field to a content type, it will automatically appear anytime content in that content type is displayed. You should be able to add the sub-title field for your page, event or whatever else you need and have it automatically appear in the markup.
You can 'manage display' of a content type to drag and drop the order for fields to appear. You could take it a step further by using a module like Display Suite to add formatting or layout per-content type.
If you feel like this isn't good enough and the markup for the subtitle must be at the same level as the page title (which is rare), at least add an if statement to make your code check to see if the variable is present before trying to print it. I'd also add a new variable and comments for code readability.
<?php
$subtitle = $node->field_sub_title['und'][0]['value'];
if($subtitle){
print $subtitle;
}
?>
Consider using field_get_items or field_view_value, or at least use the LANGUAGE_NONE constant instead of 'und'
See https://api.drupal.org/api/drupal/modules%21field%21field.module/function/field_get_items/7 and https://api.drupal.org/api/drupal/modules!field!field.module/function/field_view_value/7
This has the added benefit of reducing the number of potential security holes you create.
I am trying to figure out how to make a hyperlink in a Livecycle Form which points to a URL which will change on different days that the form is rendered. For example on one day I might want the hyperlink to point to:
mywebsite/mypage?option=XXX
and on another day I want it to point to:
mywebsite/mypage?option=YYY
The XXX and YYY can be passed into the form's data pretty easily as XML, but I just don't know how to make it so that the hyperlink is changed to correspond to this.
Any suggestions?
This can be accomplished with JavaScript in LiveCycle Designer. The following script, placed on the Form's docReady event will let you dynamically change the URL of a text object.
form1::docReady - (JavaScript, client)
// If this code is running on the server, you don't want it to run any code
// that might force a relayout, or you could get stuck in an infinite loop
if (xfa.host.name != "XFAPresentationAgent") {
// You would load the URL that you want into this variable, based on
// whatever XML data is being passed into your form
var sURL = "www.stackoverflow.com"; // mywebsite/mypage?option=xxx
// URLs are encoded in XHTML. In order to change the URL, you need
// to create the right XHTML string and push it into the Text object's
// <value> node. This is a super simple XHTML shell for this purpose.
// You could add all sorts of markup to make your hyperlink look pretty
var sRichText = "<body><p>Foo</p></body>";
// Assuming you have a text object called "Text1" on the form, this
// call will push the rich text into the node. Note that this call
// will force a re-layout of the form
this.resolveNode("Text1").value.exData.loadXML(sRichText, false, true);
}
There are a couple of caveats: URLs in Acrobat are only supported in Acrobat 9.0 and later. So if someone using an older version of Acrobat opens your form, the URLs won't work.
Also, as you can see from the "if (xfa.host.name !=...)" line, this code won't run properly if the form is being generated on the server, because forcing a re-layout of a form during docReady can cause problems on certain older versions of the LiveCycle server. If you do need to run this script on the server, you should probably pick a different event then form::docReady.
I a number of complaints from users in WorkSpace that clicking links opened them in the same tab so they lost their WorkSpace form, and there's no option to change that in Designer 11. I think the solution I came up with for that would work for you too.
I made buttons with no border and no background, and in their click event have this line (in Javascript, run at client)
app.launchURL("http:/stackoverflow.com/", true);
It would be easy to add some logic to choose the right URL based on the day and it doesn't cause any form re-rendering.
In some spots where the hyperlink is in line with other text, I leave the text of the link blue and underlined but with no hyperlink, and just place the button (no background, no border, no caption) over it. Does require positioned and not flowed subforms for that to work, so depending on your layout it could get a little clunky.
Wow, just realized I am super late to the party. Well, for anyone using ES4 facing a similar problem . . .
Ended up using a 3rd party component to manipulate the PDF's hyperlinks...wish there was a better solution as this one costs about $1000.