Special parameter "$#" contains the following string variables,
echo $#
outputs: a.bdf, b.bdf,c.nas,d.nas
I want to extract the string variables with extension 'bdf' and save it in another array.
Is it possible to do so in bash?
Just iterate through it with a for loop :
for ARG in "$#";do
if [[ "$ARG" == *.bdf ]];then
BDF_ARRAY+=("$ARG") #you don't need to initialize this array before the loop in bash
else #optional block, if you want to split $# in 2 arrays
OTHER_ARRAY+=("$ARG")
fi
done
echo ${BDF_ARRAY[#]}
echo ${OTHER_ARRAY[#]}
Using for loop
for i in "$#";do
if [[ "${i##*.}" == bdf ]]; then
ARRAY2+=("$i")
fi
done
In the generic case:
#!/bin/bash
for i in "$#"; do
case "$i" in
*.bdf) BDF_ARRAY+=("$i")
;;
*.nas) NAS_ARRAY+=("$i")
;;
esac
done
for i in "${BDF_ARRAY[#]}"; do echo "BDF: $i"; done
for i in "${NAS_ARRAY[#]}"; do echo "NAS: $i"; done
Related
Let's say we declared two associative arrays:
#!/bin/bash
declare -A first
declare -A second
first=([ele]=value [elem]=valuee [element]=valueee)
second=([ele]=foo [elem]=fooo [element]=foooo)
# echo ${$1[$2]}
I want to echo the given hashmap and element from script inputs. For example, if I run sh.sh second elem, the script should echo fooo.
An inelegant but bullet-proof solution would be to white-list $1 with the allowed values:
#!/bin/bash
# ...
[[ $2 ]] || exit 1
unset result
case $1 in
first) [[ ${first["$2"]+X} ]] && result=${first["$2"]} ;;
second) [[ ${second["$2"]+X} ]] && result=${second["$2"]} ;;
*) exit 1 ;;
esac
[[ ${result+X} ]] && printf '%s\n' "$result"
notes:
[[ $2 ]] || exit 1 because bash doesn't allow empty keys
[[ ${var+X} ]] checks that the variable var is defined; with this expansion you can also check that an index or key is defined in an array.
A couple ideas come to mind:
Variable indirection expansion
Per this answer:
arr="$1[$2]" # build array reference from input fields
echo "${!arr}" # indirect reference via the ! character
For the sample call sh.sh second elem this generates:
fooo
Nameref (declare -n) (requires bash 4.3+)
declare -n arr="$1"
echo "${arr[$2]}"
For the sample call sh.sh second elem this generates:
fooo
Using:
set -o nounset
Having an indexed array like:
myArray=( "red" "black" "blue" )
What is the shortest way to check if element 1 is set?
I sometimes use the following:
test "${#myArray[#]}" -gt "1" && echo "1 exists" || echo "1 doesn't exist"
I would like to know if there's a preferred one.
How to deal with non-consecutive indexes?
myArray=()
myArray[12]="red"
myArray[51]="black"
myArray[129]="blue"
How to quick check that 51 is already set for example?
How to deal with associative arrays?
declare -A myArray
myArray["key1"]="red"
myArray["key2"]="black"
myArray["key3"]="blue"
How to quick check that key2 is already used for example?
To check if the element is set (applies to both indexed and associative array)
[ "${array[key]+abc}" ] && echo "exists"
Basically what ${array[key]+abc} does is
if array[key] is set, return abc
if array[key] is not set, return nothing
References:
See Parameter Expansion in Bash manual and the little note
if the colon is omitted, the operator tests only for existence [of parameter]
This answer is actually adapted from the answers for this SO question: How to tell if a string is not defined in a bash shell script?
A wrapper function:
exists(){
if [ "$2" != in ]; then
echo "Incorrect usage."
echo "Correct usage: exists {key} in {array}"
return
fi
eval '[ ${'$3'[$1]+muahaha} ]'
}
For example
if ! exists key in array; then echo "No such array element"; fi
From man bash, conditional expressions:
-v varname
True if the shell variable varname is set (has been assigned a value).
example:
declare -A foo
foo[bar]="this is bar"
foo[baz]=""
if [[ -v "foo[bar]" ]] ; then
echo "foo[bar] is set"
fi
if [[ -v "foo[baz]" ]] ; then
echo "foo[baz] is set"
fi
if [[ -v "foo[quux]" ]] ; then
echo "foo[quux] is set"
fi
This will show that both foo[bar] and foo[baz] are set (even though the latter is set to an empty value) and foo[quux] is not.
New answer
From version 4.2 of bash (and newer), there is a new -v option to built-in test command.
From version 4.3, this test could address element of arrays.
array=([12]="red" [51]="black" [129]="blue")
for i in 10 12 30 {50..52} {128..131};do
if [ -v 'array[i]' ];then
echo "Variable 'array[$i]' is defined"
else
echo "Variable 'array[$i]' not exist"
fi
done
Variable 'array[10]' not exist
Variable 'array[12]' is defined
Variable 'array[30]' not exist
Variable 'array[50]' not exist
Variable 'array[51]' is defined
Variable 'array[52]' not exist
Variable 'array[128]' not exist
Variable 'array[129]' is defined
Variable 'array[130]' not exist
Variable 'array[131]' not exist
Note: regarding ssc's comment, I've single quoted 'array[i]' in -v test, in order to satisfy shellcheck's error SC2208. This seem not really required here, because there is no glob character in array[i], anyway...
This work with associative arrays in same way:
declare -A aArray=([foo]="bar" [bar]="baz" [baz]=$'Hello world\041')
for i in alpha bar baz dummy foo test;do
if [ -v 'aArray[$i]' ];then
echo "Variable 'aArray[$i]' is defined"
else
echo "Variable 'aArray[$i]' not exist"
fi
done
Variable 'aArray[alpha]' not exist
Variable 'aArray[bar]' is defined
Variable 'aArray[baz]' is defined
Variable 'aArray[dummy]' not exist
Variable 'aArray[foo]' is defined
Variable 'aArray[test]' not exist
With a little difference:In regular arrays, variable between brackets ([i]) is integer, so dollar symbol ($) is not required, but for associative array, as key is a word, $ is required ([$i])!
Old answer for bash prior to V4.2
Unfortunately, bash give no way to make difference betwen empty and undefined variable.
But there is some ways:
$ array=()
$ array[12]="red"
$ array[51]="black"
$ array[129]="blue"
$ echo ${array[#]}
red black blue
$ echo ${!array[#]}
12 51 129
$ echo "${#array[#]}"
3
$ printf "%s\n" ${!array[#]}|grep -q ^51$ && echo 51 exist
51 exist
$ printf "%s\n" ${!array[#]}|grep -q ^52$ && echo 52 exist
(give no answer)
And for associative array, you could use the same:
$ unset array
$ declare -A array
$ array["key1"]="red"
$ array["key2"]="black"
$ array["key3"]="blue"
$ echo ${array[#]}
blue black red
$ echo ${!array[#]}
key3 key2 key1
$ echo ${#array[#]}
3
$ set | grep ^array=
array=([key3]="blue" [key2]="black" [key1]="red" )
$ printf "%s\n" ${!array[#]}|grep -q ^key2$ && echo key2 exist || echo key2 not exist
key2 exist
$ printf "%s\n" ${!array[#]}|grep -q ^key5$ && echo key5 exist || echo key5 not exist
key5 not exist
You could do the job without the need of externals tools (no printf|grep as pure bash), and why not, build checkIfExist() as a new bash function:
$ checkIfExist() {
eval 'local keys=${!'$1'[#]}';
eval "case '$2' in
${keys// /|}) return 0 ;;
* ) return 1 ;;
esac";
}
$ checkIfExist array key2 && echo exist || echo don\'t
exist
$ checkIfExist array key5 && echo exist || echo don\'t
don't
or even create a new getIfExist bash function that return the desired value and exit with false result-code if desired value not exist:
$ getIfExist() {
eval 'local keys=${!'$1'[#]}';
eval "case '$2' in
${keys// /|}) echo \${$1[$2]};return 0 ;;
* ) return 1 ;;
esac";
}
$ getIfExist array key1
red
$ echo $?
0
$ # now with an empty defined value
$ array["key4"]=""
$ getIfExist array key4
$ echo $?
0
$ getIfExist array key5
$ echo $?
1
What about a -n test and the :- operator?
For example, this script:
#!/usr/bin/env bash
set -e
set -u
declare -A sample
sample["ABC"]=2
sample["DEF"]=3
if [[ -n "${sample['ABC']:-}" ]]; then
echo "ABC is set"
fi
if [[ -n "${sample['DEF']:-}" ]]; then
echo "DEF is set"
fi
if [[ -n "${sample['GHI']:-}" ]]; then
echo "GHI is set"
fi
Prints:
ABC is set
DEF is set
tested in bash 4.3.39(1)-release
declare -A fmap
fmap['foo']="boo"
key='foo'
# should echo foo is set to 'boo'
if [[ -z "${fmap[${key}]}" ]]; then echo "$key is unset in fmap"; else echo "${key} is set to '${fmap[${key}]}'"; fi
key='blah'
# should echo blah is unset in fmap
if [[ -z "${fmap[${key}]}" ]]; then echo "$key is unset in fmap"; else echo "${key} is set to '${fmap[${key}]}'"; fi
Reiterating this from Thamme:
[[ ${array[key]+Y} ]] && echo Y || echo N
This tests if the variable/array element exists, including if it is set to a null value. This works with a wider range of bash versions than -v and doesn't appear sensitive to things like set -u. If you see a "bad array subscript" using this method please post an example.
This is the easiest way I found for scripts.
<search> is the string you want to find, ASSOC_ARRAY the name of the variable holding your associative array.
Dependign on what you want to achieve:
key exists:
if grep -qe "<search>" <(echo "${!ASSOC_ARRAY[#]}"); then echo key is present; fi
key exists not:
if ! grep -qe "<search>" <(echo "${!ASSOC_ARRAY[#]}"); then echo key not present; fi
value exists:
if grep -qe "<search>" <(echo "${ASSOC_ARRAY[#]}"); then echo value is present; fi
value exists not:
if ! grep -qe "<search>" <(echo "${ASSOC_ARRAY[#]}"); then echo value not present; fi
I wrote a function to check if a key exists in an array in Bash:
# Check if array key exists
# Usage: array_key_exists $array_name $key
# Returns: 0 = key exists, 1 = key does NOT exist
function array_key_exists() {
local _array_name="$1"
local _key="$2"
local _cmd='echo ${!'$_array_name'[#]}'
local _array_keys=($(eval $_cmd))
local _key_exists=$(echo " ${_array_keys[#]} " | grep " $_key " &>/dev/null; echo $?)
[[ "$_key_exists" = "0" ]] && return 0 || return 1
}
Example
declare -A my_array
my_array['foo']="bar"
if [[ "$(array_key_exists 'my_array' 'foo'; echo $?)" = "0" ]]; then
echo "OK"
else
echo "ERROR"
fi
Tested with GNU bash, version 4.1.5(1)-release (i486-pc-linux-gnu)
For all time people, once and for all.
There's a "clean code" long way, and there is a shorter, more concise, bash centered way.
$1 = The index or key you are looking for.
$2 = The array / map passed in by reference.
function hasKey ()
{
local -r needle="${1:?}"
local -nr haystack=${2:?}
for key in "${!haystack[#]}"; do
if [[ $key == $needle ]] ;
return 0
fi
done
return 1
}
A linear search can be replaced by a binary search, which would perform better with larger data sets. Simply count and sort the keys first, then do a classic binary halving of of the haystack as you get closer and closer to the answer.
Now, for the purist out there that is like "No, I want the more performant version because I may have to deal with large arrays in bash," lets look at a more bash centered solution, but one that maintains clean code and the flexibility to deal with arrays or maps.
function hasKey ()
{
local -r needle="${1:?}"
local -nr haystack=${2:?}
[ -n ${haystack["$needle"]+found} ]
}
The line [ -n ${haystack["$needle"]+found} ]uses the ${parameter+word} form of bash variable expansion, not the ${parameter:+word} form, which attempts to test the value of a key, too, which is not the matter at hand.
Usage
local -A person=(firstname Anthony lastname Rutledge)
if hasMapKey "firstname" person; then
# Do something
fi
When not performing substring expansion, using the form described
below (e.g., ‘:-’), Bash tests for a parameter that is unset or null.
Omitting the colon results in a test only for a parameter that is
unset. Put another way, if the colon is included, the operator tests
for both parameter’s existence and that its value is not null; if the
colon is omitted, the operator tests only for existence.
${parameter:-word}
If parameter is unset or null, the expansion of word is substituted. Otherwise, the value of parameter is substituted.
${parameter:=word}
If parameter is unset or null, the expansion of word is assigned to parameter. The value of parameter is then substituted. Positional
parameters and special parameters may not be assigned to in this way.
${parameter:?word}
If parameter is null or unset, the expansion of word (or a message to that effect if word is not present) is written to the standard
error and the shell, if it is not interactive, exits. Otherwise, the
value of parameter is substituted. ${parameter:+word}
If parameter is null or unset, nothing is substituted, otherwise the expansion of word is substituted.
https://www.gnu.org/savannah-checkouts/gnu/bash/manual/bash.html#Shell-Parameter-Expansion
If $needle does not exist expand to nothing, otherwise expand to the non-zero length string, "found". This will make the -n test succeed if the $needle in fact does exist (as I say "found"), and fail otherwise.
Both in the case of arrays and hash maps I find the easiest and more straightforward solution is to use the matching operator =~.
For arrays:
myArray=("red" "black" "blue")
if [[ " ${myArray[#]} " =~ " blue " ]]; then
echo "blue exists in myArray"
else
echo "blue does not exist in myArray"
fi
NOTE: The spaces around the array guarantee the first and last element can match. The spaces around the value guarantee an exact match.
For hash maps, it's actually the same solution since printing a hash map as a string gives you a list of its values.
declare -A myMap
myMap=(
["key1"]="red"
["key2"]="black"
["key3"]="blue"
)
if [[ " ${myMap[#]} " =~ " blue " ]]; then
echo "blue exists in myMap"
else
echo "blue does not exist in myMap"
fi
But what if you would like to check whether a key exists in a hash map? In the case you can use the ! operator which gives you the list of keys in a hash map.
if [[ " ${!myMap[#]} " =~ " key3 " ]]; then
echo "key3 exists in myMap"
else
echo "key3 does not exist in myMap"
fi
I get bad array subscript error when the key I'm checking is not set. So, I wrote a function that loops over the keys:
#!/usr/bin/env bash
declare -A helpList
function get_help(){
target="$1"
for key in "${!helpList[#]}";do
if [[ "$key" == "$target" ]];then
echo "${helpList["$target"]}"
return;
fi
done
}
targetValue="$(get_help command_name)"
if [[ -z "$targetvalue" ]];then
echo "command_name is not set"
fi
It echos the value when it is found & echos nothing when not found. All the other solutions I tried gave me that error.
I am using this code to check one $var if exists in array :
if echo ${myArr[#]} | grep -qw $myVar; then echo "Var exists on array" fi
How could I combine more than one $vars to my check? Something like grep -qw $var1,$var2; then ... fi
Thank you in Advance.
if echo ${myArr[#]} | grep -qw -e "$myVar" -e "$otherVar"
then
echo "Var exists on array"
fi
From the man-page:
-e PATTERN, --regexp=PATTERN
Use PATTERN as the pattern.
This can be used to specify multiple search patterns, or to protect a pattern beginning with a hyphen (-). (-e is specified by POSIX.)
But if you want to use arrays like this you might as well use the bash built-in associative arrays.
To implement and logic:
myVar1=home1
myVar2=home2
myArr[0]=home1
myArr[1]=home2
if echo ${myArr[#]} | grep -qw -e "$myVar1.*$myVar2" -e "$myVar2.*$myVar1"
then
echo "Var exists on array"
fi
# using associative arrays
declare -A assoc
assoc[home1]=1
assoc[home2]=1
if [[ ${assoc[$myVar1]} && ${assoc[$myVar2]} ]]; then
echo "Var exists on array"
fi
Actually you don't need grep for this, Bash is perfectly capable of doing Extended Regular Expressions itself (Bash 3.0 or later).
pattern="$var1|$var2|$var3"
for element in "${myArr[#]}"
do
if [[ $element =~ $pattern ]]
then
echo "$pattern exists in array"
break
fi
done
Something quadratic, but aware of spaces:
myArr=(aa "bb c" ddd)
has_values(){
for e in "${myArr[#]}" ; do
for f ; do
if [ "$e" = "$f" ]; then return 0 ; fi
done
done
return 1
}
if has_values "ee" "bb c" ; then echo yes ; else echo "no" ; fi
this example will print no because "bb c" != "bb c"
This question already has answers here:
Check if a Bash array contains a value
(41 answers)
Closed 2 years ago.
I was wondering if there is an efficient way to check if an element is present within an array in Bash? I am looking for something similar to what I can do in Python, like:
arr = ['a','b','c','d']
if 'd' in arr:
do your thing
else:
do something
I've seen solutions using associative array for bash for Bash 4+, but I am wondering if there is another solution out there.
Please understand that I know the trivial solution is to iterate in the array, but I don't want that.
You could do:
if [[ " ${arr[*]} " == *" d "* ]]; then
echo "arr contains d"
fi
This will give false positives for example if you look for "a b" -- that substring is in the joined string but not as an array element. This dilemma will occur for whatever delimiter you choose.
The safest way is to loop over the array until you find the element:
array_contains () {
local seeking=$1; shift
local in=1
for element; do
if [[ $element == "$seeking" ]]; then
in=0
break
fi
done
return $in
}
arr=(a b c "d e" f g)
array_contains "a b" "${arr[#]}" && echo yes || echo no # no
array_contains "d e" "${arr[#]}" && echo yes || echo no # yes
Here's a "cleaner" version where you just pass the array name, not all its elements
array_contains2 () {
local array="$1[#]"
local seeking=$2
local in=1
for element in "${!array}"; do
if [[ $element == "$seeking" ]]; then
in=0
break
fi
done
return $in
}
array_contains2 arr "a b" && echo yes || echo no # no
array_contains2 arr "d e" && echo yes || echo no # yes
For associative arrays, there's a very tidy way to test if the array contains a given key: The -v operator
$ declare -A arr=( [foo]=bar [baz]=qux )
$ [[ -v arr[foo] ]] && echo yes || echo no
yes
$ [[ -v arr[bar] ]] && echo yes || echo no
no
See 6.4 Bash Conditional Expressions in the manual.
Obvious caveats aside, if your array was actually like the one above, you could do
if [[ ${arr[*]} =~ d ]]
then
do your thing
else
do something
fi
Initialize array arr and add elements
set variable to search for SEARCH_STRING
check if your array contains element
arr=()
arr+=('a')
arr+=('b')
arr+=('c')
SEARCH_STRING='b'
if [[ " ${arr[*]} " == *"$SEARCH_STRING"* ]];
then
echo "YES, your arr contains $SEARCH_STRING"
else
echo "NO, your arr does not contain $SEARCH_STRING"
fi
If array elements don't contain spaces, another (perhaps more readable) solution would be:
if echo ${arr[#]} | grep -q -w "d"; then
echo "is in array"
else
echo "is not in array"
fi
array=("word" "two words") # let's look for "two words"
using grep and printf:
(printf '%s\n' "${array[#]}" | grep -x -q "two words") && <run_your_if_found_command_here>
using for:
(for e in "${array[#]}"; do [[ "$e" == "two words" ]] && exit 0; done; exit 1) && <run_your_if_found_command_here>
For not_found results add || <run_your_if_notfound_command_here>
As bash does not have a built-in value in array operator and the =~ operator or the [[ "${array[#]" == *"${item}"* ]] notation keep confusing me, I usually combine grep with a here-string:
colors=('black' 'blue' 'light green')
if grep -q 'black' <<< "${colors[#]}"
then
echo 'match'
fi
Beware however that this suffers from the same false positives issue as many of the other answers that occurs when the item to search for is fully contained, but is not equal to another item:
if grep -q 'green' <<< "${colors[#]}"
then
echo 'should not match, but does'
fi
If that is an issue for your use case, you probably won't get around looping over the array:
for color in "${colors[#]}"
do
if [ "${color}" = 'green' ]
then
echo "should not match and won't"
break
fi
done
for color in "${colors[#]}"
do
if [ "${color}" = 'light green' ]
then
echo 'match'
break
fi
done
Here's another way that might be faster, in terms of compute time, than iterating. Not sure. The idea is to convert the array to a string, truncate it, and get the size of the new array.
For example, to find the index of 'd':
arr=(a b c d)
temp=`echo ${arr[#]}`
temp=( ${temp%%d*} )
index=${#temp[#]}
You could turn this into a function like:
get-index() {
Item=$1
Array="$2[#]"
ArgArray=( ${!Array} )
NewArray=( ${!Array%%${Item}*} )
Index=${#NewArray[#]}
[[ ${#ArgArray[#]} == ${#NewArray[#]} ]] && echo -1 || echo $Index
}
You could then call:
get-index d arr
and it would echo back 3, which would be assignable with:
index=`get-index d arr`
FWIW, here's what I used:
expr "${arr[*]}" : ".*\<$item\>"
This works where there are no delimiters in any of the array items or in the search target. I didn't need to solve the general case for my applicaiton.
Trivial question.
#!/bin/bash
if test -z "$1"
then
echo "No args!"
exit
fi
for newname in $(cat $1); do
echo $newname
done
I want to replace that echo inside the loop with array population code.
Then, after the loop ends, I want to read the array again and echo the contents.
Thanks.
If the file, as your code shows, has a set of files, each in one line, you can assign the value to the array as follows:
array=(`cat $1`)
After that, to process every element you can do something like:
for i in ${array[#]} ; do echo "file = $i" ; done
declare -a files
while IFS= read -r
do
files+=("$REPLY") # Array append
done < "$1"
echo "${files[*]}" # Print entire array separated by spaces
cat is not needed for this.
#!/bin/bash
files=( )
for f in $(cat $1); do
files[${#files[*]}]=$f
done
for f in ${files[#]}; do
echo "file = $f"
done