I have a website that does ticket sales. This website uses PayPal to process the payments. More specifically, I am using ExpressCheckout to process payments.
I have two sellers right now, and I cannot get them to both work at the same time.
Their sites are:
myapp.appspot.com/SellerA
myapp.appspot.com/SellerB
I have separate PayPal signature credentials for each seller in different config files:
acct1.UserName = sellera_api1.comcast.net
acct1.Password = <passwordA>
acct1.Signature = <signatureA>
acct1.UserName = sellerb_api1.comcast.net
acct1.Password = <passwordB>
acct1.Signature = <signatureB>
Here is the frustrating workflow that I am encountering:
1) Seller A works just fine, Seller B gets this error:
com.paypal.exception.InvalidCredentialException: Invalid userIdsellerb_api1.comcast.net
2) request new signature credentials for seller B and paste them into seller B's config file
3) Seller B works just fine, Seller A gets this error:
com.paypal.exception.InvalidCredentialException: Invalid userIdsellera_api1.comcast.net
4) request new signature credentials for seller A and paste them into seller A's config file
5) back to step 1
Any idea what could be happening here and how to fix this problem?
You might have to set them as two different accounts (like below) so that you make different API calls based on API user.
acct1.Username = sellera_api1.comcast.net
acct2.Username = sellerb_api1.comcast.net
Then you could call
setExpressCheckout(SetExpressCheckoutReq setExpressCheckoutReq, String apiUsername)
This probably not the best way to solve it and so I am very interested to see other solutions.
Related
I have a Non-Salesforce Auth System which holds usernames and passwords for a few thousand users. I am willing to migrate these users to Salesforce and give access to these users to my Experience Cloud site. I am developing an apex REST Resource which will take username and password as arguments and create a user with that username and password with a community profile. I am planning to call this API from my Non-Salesforce system and migrate all these users. I am using Site.createExternalUser method in this API. I am getting the exception
Site.ExternalUserCreateException: [That operation is only allowed from within an active site.]
The reason I am using Site.createExternalUser is because I don't want to send the welcome email/reset password email to my users since they already have signed up successfully long ago.
I am open to any alternatives for achiving this.
Below is my code:
#RestResource(urlMapping='/createUser/*')
global with sharing class createUserRestResource {
#HttpPost
global static String doPost(){
Contact con=new Contact();
con.Firstname="First";
con.LastName= "Last";
con.Email="first.last#example.com";
con.AccountId='/Add an account Id here./';
insert con;
usr.Username= "usernameFromRequest#example.com";
usr.Alias= "alias123";
usr.Email= "first.last#example.com";
usr.FirstName= "First";
usr.IsActive= true;
usr.LastName= "Last";
usr.ProfileId='/Community User Profile Id/';
usr.EmailEncodingKey= 'ISO-8859-1';
usr.TimeZoneSidKey= 'America/Los_Angeles';
usr.LocaleSidKey= 'en_US';
usr.LanguageLocaleKey= 'en_US';
usr.ContactId = con.Id;
String userId = Site.createExternalUser(usr, con.AccountId, 'Password#1234', false);
return userId;
}
}
You can suppress sending emails out in whole org (Setup -> Deliverability) or in the Community config there will be way to not send welcome emails (your community -> Workspaces -> Administration -> Emails).
Without running on actual Site I don't think you can pull it off in one go. In theory it's simple, insert contact, then insert user. In practice depends which fields you set on the user. If it's Partner community you might be setting UserRoleId too and that's forbidden. See MIXED DML error. In Customer community you might be safe... until you decide to assign them some permission sets too.
You might need 2 separate endpoints, 1 to create contact, 1 to make user out of it. Or save the contact and then offload user creation to #future/Queueable/something else like that.
I successfully installed and ran a couple of circuits on a backend the other day (essex).
Everything was ok, results came up, but the next day, once I wanted more QC, I could not manage to get a provider.
I have looked into my account (active), looked into the package (up-to-date), and a new file in the project. I also already disabled and enabled the account without problems, but I keep having this error.
Code
from qiskit import IBMQ
IBMQ.active_account()
IBMQ.providers()
provider = IBMQ.get_provider(hub='ibm-q', group='open', project='main')
and I get:
>~/my_environment_name/lib/python3.7/site-packages/qiskit/providers/ibmq/ibmqfactory.py in get_provider(self, hub, group, project)
425 raise IBMQProviderError('No provider matches the specified criteria: '
426 'hub = {}, group = {}, project = {}'
--> 427 .format(hub, group, project))
428 if len(providers) > 1:
429 raise IBMQProviderError('More than one provider matches the specified criteria.'
IBMQProviderError: 'No provider matches the specified criteria: hub = ibm-q, group = open, project = main'
I would like to know where I am wrong, I look forward to keep learning thru the backends efficiently.
Thank you in advance
This means that there is no provider that matches all the criteria you specified, so in that hub, group and project. This could be because your account hasn't loaded correctly, so check to see if anything is returned from IBMQ.providers(). If there isn't anything load your account using IBMQ.load_account(). The other issue could be that there are genuinely no backends that meet those criteria, so try running IBMQ.get_provider() instead.
Try to use API token to enable your IBMQ account.
from qiskit import IBMQ
provider = IBMQ.enable_account("your-api-key") # We load our account
provider.backends() # We retrieve the backends to check their status
for b in provider.backends():
print(b.status().to_dict())
Create IBM Quantum account if you don't have one, then use the API token that available in the dashboard as enable_account() method argument to resolve this issue.
For More: https://quantum-computing.ibm.com/lab/docs/iql/manage/account/ibmq
https://quantum-computing.ibm.com/
https://www.ibm.com/account/reg/us-en/signup?formid=urx-19776&target=https%3A%2F%2Flogin.ibm.com%2Foidc%2Fendpoint%2Fdefault%2Fauthorize%3FqsId%3D70b061b4-7c64-4545-a504-a8871f2d414f%26client_id%3DN2UwMWNkYmMtZjc3YS00
I want to set .config.inc.php of MarketplaceWebServiceOrders library that I used to access order of amazon seller account.
Here is my config.inc.php file setting
/************************************************************************
* REQUIRED
*
* All MWS requests must contain a User-Agent header. The application
* name and version defined below are used in creating this value.
***********************************************************************/
define('APPLICATION_NAME', 'MarketplaceWebServiceOrders');
define('APPLICATION_VERSION', '2013-09-01');
After figure out these setting I got error
Caught Exception: Resource / is not found on this server. API Section is missing or you have provided an invalid operation name. Response Status Code: 404 Error Code: InvalidAddress Error Type: Sender Request ID: 47e5f613-5913-48bb-ac9e-cb00871b36af XML: Sender InvalidAddress Resource / is not found on this server. API Section is missing or you have provided an invalid operation name. 47e5f613-5913-48bb-ac9e-cb00871b36af ResponseHeaderMetadata: RequestId: 47e5f613-5913-48bb-ac9e-cb00871b36af, ResponseContext: 6qut/Q5rGI/7Wa0eutUnNK1+b/1rvHSojYBvlGThEd1wAGdfEtnpP2vbs28T0GNpF9uG82O0/9kq 93XeUIb9Tw==, Timestamp: 2015-09-15T12:47:19.924Z, Quota Max: , Quota Remaining: , Quota Resets At:
Here GetOrderSample.php file code for service url. Which I have done already.
// More endpoints are listed in the MWS Developer Guide
// North America:
$serviceUrl = "https://mws.amazonservices.com/Orders/2013-09-01";
// Europe
//$serviceUrl = "https://mws-eu.amazonservices.com/Orders/2013-09-01";
// Japan
//$serviceUrl = "https://mws.amazonservices.jp/Orders/2013-09-01";
// China
//$serviceUrl = "https://mws.amazonservices.com.cn/Orders/2013-09-01";
$config = array (
'ServiceURL' => $serviceUrl,
'ProxyHost' => null,
'ProxyPort' => -1,
'ProxyUsername' => null,
'ProxyPassword' => null,
'MaxErrorRetry' => 3,
);
$service = new MarketplaceWebServiceOrders_Client(
AWS_ACCESS_KEY_ID,
AWS_SECRET_ACCESS_KEY,
APPLICATION_NAME,
APPLICATION_VERSION,
$config);
Caught Exception: Resource / is not found on this server.
This is telling you that the problem is with the path. It's not being able to find that.
Are you sure that the class you're trying to use is in the right path? Most classes that you need to run the samples are in the "Model" folder.
I mean to say, if you take the sample out of the sample folder and put it elsewhere, it won't be able to find classes in the "Model" folder.
An easy fix to test it is to put everything you downloaded from the MWS site into your web directory and just edit the config file. It should work that way.
I'm not a php guy, but I don't see where you're setting up the access keys, merchant id, marketplace id, and most importantly the serviceURL. The 404 error is the first clue meaning it can't find the service. Download the PHP client library which has everything you need to get started.
I am a Google Apps customer and want to use the Contact API to search for a user in the company directory.
I am able to access contacts using for example:
feed = gd_client.GetContacts()
However the contacts this returns is only a subset of my contacts and is not those in the company directory.
Has anyone had experience of this or give me any pointers.
I think what you are looking for is the Domain Shared Contact API instead of the Contact API. Check this out (https://developers.google.com/google-apps/domain-shared-contacts/)
Try to run the get request against the domain, you should be able to retrieve your directory contacts instead of personal contacts (https://developers.google.com/admin-sdk/domain-shared-contacts/#Retrieving)
Try using Query to get result feed. You can specify max results to get in query. This way your result feed will be returned with more contacts in other groups as well.
URL FeedURL = new URL("https://www.google.com/m8/feeds/contacts/default/full");
Query MyQuery = new Query(FeedURL);
MyQuery.setMaxResults(200);
ContactFeed ResultFeed = MyService.query(MyQuery, ContactFeed.class);
I am using iOS 6 Social framework for accessing user's Facebook data. I am trying to get likes of the current user within my app using ACAccount and SLRequest. I have a valid Facebook account reference of type ACAccount named facebook, and I'm trying to get user's likes this way:
SLRequest *req = [SLRequest requestForServiceType:SLServiceTypeFacebook requestMethod:SLRequestMethodGET URL:url parameters:nil];
req.account = facebook;
[req performRequestWithHandler:^(NSData *responseData, NSHTTPURLResponse *urlResponse, NSError *error) {
//my handler code.
}
where url is #"https://graph.facebook.com/me/likes?fields=name"; In my handler, I'm getting this response:
{
error = {
code = 2500;
message = "An active access token must be used to query information about the current user.";
type = OAuthException;
};
}
Shouldn't access tokens be handled by the framework? I've found a similar post Querying Facebook user data through new iOS6 social framework but it doesn't make sense to hard-code an access token parameter into the URL, as logically the access token/login checking should be handled automatically by the framework. In all examples that I've seen around no one plays with an access token manually:
http://damir.me/posts/facebook-authentication-in-ios-6
iOS 6 Facebook posting procedure ends up with "remote_app_id does not match stored id" error
etc.
I am using the iOS6-only approach with the built in Social framework, and I'm not using the Facebook SDK. Am I missing something?
Thanks,
Can.
You need to keep a strong reference to the ACAccountStore that the account comes from. If the store gets deallocated, it looks like it causes this problem.
Try running on an actual device instead of a simulator. This worked for me.
Ensure that your bundle id is input into your Facebook app's configuration. You might have a different bundle id for your dev/debug build.