I got a batch file that will run a c++ program and output to a file with ">" redirection. This file is to be run by task scheduler.
I found out that when the batch file is ran from task scheduler, it claims "access is denied". The batch file runs fine until it reaches that ">" redirection part. (I see that the whole batch can run finely without ">") I have tried running the task scheduler as an administrator as well, but I still got "access is denied".
Is there a way around this?
For those who can't write file into the relative path.
Try go to property of the task.
property > action > edit your action.
Change the "Start in" to your EXE working path.
There may be quite a few reasons of it, first check below points:
Check whether the user who has scheduled batch script to run in Task
scheduler has admin access on the system or not.
Give that user full Share/NTFS permissions on the "RedirectedFolders" and all of the sub
folders as well.you can manually propagate all permissions down to the folders.
The user should have read and write
permissions along with full control to the "RedirectedFolders" .
Related
I am trying to create a scheduled task to run a batch file. I know that my batch file runs fine, because I have no problem running it manually. However, when the task calls it, it says that it's running, but it's not. The reason I know that it's not running is because it calls a python script, and the python script sends an email saying that the process has started. And I'm not receiving that email.The python process doesn't take too long (maybe 5 minutes at most), and the task keeps saying that it's "Running" after an hour.
I have the current settings with "Run whether user is logged on or not" (doesn't seem to work at all if I have it as "Run only when user us logged on", because the status never changes from "Ready" even if I tell it to run). I also have the setting with "Run with highest privileges", and just the name of the batch file under "Program/script" and the path to the batch file under "Start in". I also want to note, that I have the user account as "DOMAIN\Administrator".
However, I've tried other ways of calling it. I've tried putting the entire path with the batch file under "Program/script" (G:\GOM3_Update\FeatureServices\copies\test.bat), or putting the path to the python program, and then putting the path to the python script as an argument, but that doesn't seem to work either.
I'm not sure if this issue is caused by some major security settings with windows 10, or something minor in the task scheduler settings.
Here are my current settings:
Full path of the Start in is: "G:\GOM3_Update\FeatureServices\copies\"
The batch file:
"C:\Users\Administrator.DOMAIN\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone\python.exe" "G:\GOM3_Update\FeatureServices\copies\database.py"
I would include a full path to batch file here:
From my personal experience it is usually the environment problem, aka things like current working directory etc..
Also, make sure to click the refresh button in the right pane of Task Scheduler because it is known for not updating the status of task unless you manually refresh. You may see it change from 'running' to 'ready' sooner if you do that.
The reason why I feel like your screen is not refreshing is because normally Task Scheduler does not allow any scheduled task to execute for longer that 1 hour and you said yours was still saying 'running' after an hour.
What does the exit code and messages say under tasks history?
Exit code 0 means no errors captured by Task Scheduler.
Another idea is to log the start of batch script (inside batch) to a log file before you do anything. And do the same for python file. This will help you narrow down the problem.
I struggled with this one also a lot, changing the User Account
AND Group. User Account alone was not enough for me.
This helped for me:
And then clicking on the Locations...you'll have to choose "WINSTADM"
I am trying to make a batch file that calls an executable named idlelogoff after a certain amount of idle time. I can see the process in task manager however the computer doesn't sign out.
However when I run the process as an administrator manually it works. I thought the system account was supposed to have all privileges. Very confused as to why this isn't working. Any help would be appreciated.
Below is my batch file contents.
start "IdleLogOff" /d C:\ /b idlelogoff.exe 10 logoff
I found an answer to this by using local group policy instead of domain policy . I used user configuration->windows settings-> and then logon scripts and had it run on an user logon. The script works from here but did not work from domain group policy for whatever reason
look into taskmanager- i suppose that the process runs under system-account when using domain-gpo- no matter if activated/linked in user or workstation context.
So the exe would check if the system-account is idle.
A solution could be putting the exe into autostart-folder or create a run-key into registry or with an scheduled task -> all can be done with a gpo
I regularly clear a log file as I run some tests and I want to keep that log readable.
I have a batch file using the command below that works whenever the program that is being logged is turned off.
del /f *.log
When the program (a tomcat server) is running, I have an 'access is denied' error because the file is being used by another service.
I don't want to turn the tomcat off and on every time. My current workaround is to edit the log into notepad++, select all, delete, save and close notepad++.
Is there a more efficient way of doing that? I have a few batch to clean multiple times a day so I would like to automate.
Is it possible to create a .bat that would do that for me? I thought of exporting a notepad++ macro into a batch file but my various research were not successful.
I tried:
echo off
echo. > filename.log
but the result is the same => access is denied because the file is already in use.
OS: Windows Server 2008 R2 Enterprise
I am unable to get the Task Scheduler to run .bat files while I am logged off. I have a a production .bat file I want to use, but for my troubleshooting purposes I am using C:\Users\Administrator\Desktop\test.bat
test.bat is very simple. All it contains is:
taskkill /im notepad.exe
It runs successfully on its own. If I have Notepad open and I double-click test.bat then the cmd window flashes and Notepad dies. The .bat file is not the problem.
The task I created in Task Scheduler is "Test taskkill" (without the quotes). I can see its location in Windows Explorer: C:\Windows\System32\Tasks\Test taskkill
If the task is set to run only when the user is logged on then the task works. With this setting, I can right-click on it > run and I get the same behavior as if I double-click the .bat file. That means the task is configured correctly.
If I set it to run whether or not the user is logged on then when I right-click > run nothing obvious happens. The job is reported as having been run successfully in the history, but Notepad survives. I know that I am using the proper credentials for the account that I am configuring to run the task. That account is the local administrator.
This issue appears similar to issues other have had in the past:
Running a .bat file in Scheduled Task
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d47d116e-10b9-44f0-9a30-7406c86c2fbe/scheduled-task-wont-run-bat-file?forum=winservermanager
The thread in the second link seemed to resolve an identical issue for many people with the suggestion that the account used to run the task requires explicit permission to the .bat file and all files that the .bat file modifies. This was very promising (if an annoying requirement). However, I have confirmed or assigned explicit permissions for the local administrator to the following areas, and I am still not successful:
C:\Users\Administrator\Desktop\
C:\Users\Administrator\Desktop\test.bat
C:\Windows\System32\Tasks\
C:\Windows\System32\Tasks\Test taskkill
Additionally, I have confirmed that the local administrator account is in the local administrators group.
Am I missing some other permissions that needs to be set? Is there something else I should be looking at? Thanks!
I have resolved this problem with help from a contractor who was doing some other work for my institution.
In the properties window for the task, on the Action tab, when creating or editing the action that opens the batch file (in my case test.bat), there is the "Program/script:" field and there is also a "Start in (optional):" field. I previously had the "Program/script:" field containing the full path to the file, ending with the file name, and I had the "Start in (optional):" field null. This configuration appears to work without issue when the task is set to "Run only when user is logged on" in the General tab of the task's properties window. However, this configuration does not work when the task is set to "Run whether user is logged on or not".
In order to resolve the problem, I changed the action so that the "Program/script:" field contained only the file name, not the file path. I put the file path in the "Start in (optional):" field. This configuration works when the task is set to "Run only when user is logged on"! I have tested with the task running on a trigger and also with running it manually.
Not sure if this helps. My issue was using a interactive program (in particular Excel) as well.
Creating the 2 empty folders (Desktop) solved it. Create both even if you are running on x64.
C:\Windows\System32\config\systemprofile\Desktop
C:\Windows\SysWOW64\config\systemprofile\Desktop
I debugged my code and realised the code exited at this line
ExcelFile excelFile = new ExcelFile(directory, filename);
I read this solution somewhere and I cannot find the URL now.
Try this as well..
Resolved the "Run whether user is logged on or not" by setting the “Log on as Batch Job” security policy.
Here is details on the setting… https://danblee.com/log-on-as-batch-job-rights-for-task-scheduler/
You may take another approach, but here is the steps…
1) I updated the default domain group policy by adding my admin account (that I fire the task with) to the “Log on as Batch Job” security policy. (Even though ADMIN group is listed, and I am using an admin account)
2) I forced GPUPDATE on the client
3) Rebooted the client
4) Looked at the policy on the client to make sure it made it over from the DC
5) Set the task "Run whether user is logged on or not"
6) Ran the task on demand and it worked creating a PDF file.
7) Logged out and ran the task at scheduled time and it worked creating a PDF file.
I had similar problem, but it was related to the fact that there was a space in the path of my executable batch file. I have removed the space and now it works fine.
What work for me was make sure that the path is available.
i used net use Z: \computername\folder /persistent:yes
then the xxcopy /s /c /d /e /i /y D:*.* z:\BackupBat
I notice all my other .bat work fine only the one with the reference to a map folder was the one no running, so that need to be the problem. with these change the bat file runs good.
Verifying the following has worked for me:
1) 'Run if user is not logged in' option in Task Scheduler does not work for programs that is interactive mode. Example notepad, clock. Tasks will not run interactively. Make sure your program does not requires any interactive actions.
2)Check the “Start in (optional) “ If your program path is not one of the system paths. You have better to add you program path in it. On the "Program/Script" enter only the name of the program, and enter the path of your script in "Start in".
3)The user account you setup for your program must have permission not only to run your program itself and but also to run all other program that related to your program.
Here is a sample program:
On C:\myprogram\folderOne\test.cmd
date /t >> c:\Temp\testAuto.log
date /t >> c:\temp\testAuto.log
echo ----->> c:\temp\testAuto.log
cls
exit
-Create a Tasks, selecting on General>SecurityOptions "Run whether user is logged on or not"
-Enter on Action>Program/script: test.cmd
on "Start in" C:\myprogram\folderOne
-Run, you might see the cmd windows open and closes very quickly. The testAuto.log file should be in c:\tmp folder.
It might be because you don't have permission. I was facing the same problem and i found the solution like this -
Open Task Scheduler right click on your task and than select properties option.
In properties click on General tab and then click on 'User Group or User' and select the appropriate user.
I created a new free-style software project and under "Configure", I added a "Execute Windows batch command" under the section "Build".
My command in the text-box is as follows:
call \\ukvc-miu29-12\c$\Testing1\testing.bat
My console output when I try to run my build is as follows:
Started by user anonymous
Building in workspace C:\Program Files (x86)\Jenkins\jobs\Run comparison script\workspace
[workspace] $ cmd /c call C:\Windows\TEMP\hudson1649447975658279345.bat
C:\Program Files (x86)\Jenkins\jobs\Run comparison script\workspace>call \\ukvc-miu29-12\c$\Testing1\testing.bat
Access is denied.
C:\Program Files (x86)\Jenkins\jobs\Run comparison script\workspace>exit 1
Build step 'Execute Windows batch command' marked build as failure
Finished: FAILURE
Have spent close to two hours looking for a solution online, but I am unable to find one.
New to Jenkins, so any suggestion/s is/are appreciated, thanks!
I guess Jenkins runs as another user than the one you're logged in with. So that user probably isn't allowed to access that network share (or doesn't have the login credentials cached).
The easiest way of making sure it will work, would probably be to add the same user with the same password that Jenkins runs under to \\ukvc-miu29-12.
(As for the call, I'm not sure you really need it and I have a vague suspicion that you end up failing the build every time if you use call here. The temporary batch Jenkins executes there looks like it relies on the fact that control won't return if the batch file was executed successfully. But that's just a guess on my part.)