What is the reason for vim not seeing the braces, when it works in Xcode?
You need to find out which syntax group causes the highlighting. :syn list shows all active groups, but it's easier when you install the SyntaxAttr.vim - Show syntax highlighting attributes of character under cursor plugin. When you have the name of the offending syntax group, you can investigate where it comes from; (the last lines of) :scriptnames may help.
Some syntax plugins can be configured, e.g. whether to display errors, or the particular dialect to use. As most syntaxes are not accompanied by documentation, it's best to directly check in the source code, usually at $VIMRUNTIME/syntax/{filetype}.vim. If you think the highlighting is wrong, contact the author; the email address usually can be found in the plugin's header.
I'm creating a route using the Java DSL in Camel.
I'd like to perform a text substitution without creating a new processor or bean.
I have this:
.setHeader(MY_THING,
constant(my_template.replace("{id1}", simple("${header.subs_val}").getText())))
If I don't add 'constant' I get type mismatch errors. If I don't put getText() on the simple() part, I get text mismatch answers. When I run my route, it replaces {id} with the literal ${header.subs_val} instead of fetching my value from the header. Yet if I take the quotes off, I get compile errors; Java doesn't know the ${...} syntax of course.
Deployment takes a few minutes, so experiments are expensive.
So, how can I just do a simple substitution. Nothing I am finding on the web actually seems to work.
EDIT - what is the template? Specifically, a string (it's a URL)
http://this/that/{id1}/another/thing
I've inherited some code, so I am unable to simply to(...) the URL and apply the special .tof() (??) formatting.
Interesting case!
If you place my_template in a header you could use a nested simple expression(Camel 2.9 onwards) like in the example below. I am also setting a value to subs_val for the example, but I suppose your header has already a value in the route.
.setHeader("my_template", constant("http://this/that/{id1}/another/thing"))
.setHeader("subs_val",constant("22"))
.setHeader("MY_THING",simple("${in.header.my_template.replaceAll(\"\\{id1.?\",${in.header.subs_val.toString()})}"))
After this step header MY_THING has the value http://this/that/22/another/thing.
1)In this example I could skip to_String() but I do not know what's the type of your header "subs_val" .
2) I tried first with replaceAll(\"\{id1\"}\") but it didn't work with } Probably this is a bug...Will look at it again. That's why in my regex I used .?
3) When you debug your application inside a processor, where the exchange is available you can use SimpleBuilder to evaluate a simple expression easily in your IDE, without having to restart your app
SimpleBuilder.simple("${in.header.url.replaceAll(\"\\{id1.?\",${in.header.subs_val.toString()})}").evaluate(exchange, String.class);
Hope it helped :)
sorry i was new here so this problem maybe simple.
anyone knows how to check variable content?
like xx($a);
then page shows all relate information about $a. Is CakePHP allowed to do that?
i setup a kit on my cakephp
You might be looking for either var_dump() or print_r()
You can use PHP built-in functions like
var_dump() - displays structured information about variable
print_r() - the same, but preformatted with some differences
get_defined_vars() - returns array with all defined variables
Or use true CakePHP-way
Debugger::dump() - It will print out all properties and methods (if any) of the supplied variable
For more convenience you may use CakePHP Debug Kit plugin, which provides nice toolbar and some useful tools for your purpose.
I have implemented a converter to convert Int32 to String to be able to binding a property to a textBox.
I implement this converter in the namespace MyApp.Converters and it is called Int32ToStringConverter.
Then, in my axml I add the reference to my converter as follow:
<Window x:Class="MusicaDB.Views.PrincipalView"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:i="namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
**xmlns:converter="clr-namesapce:MyApp.Converters, aseembly=MyApp**">
Later, in windows.Resources I have:
<Window.Resources>
<**converter:Int32ToStringConverter** x:Key="Int32ToStringConverter" />
</Window.Resources>
I get the error that the tag Int32ToString converter does not exist in the namespace MyApp.Converters,assembly=MyApp.
I have the project in the local hard drive, in the project properties, the destination .NET is framework 4.0, not framework 4.0 client profile and I try to clear the solution and recompile but the problem persists.
Mainly, this is the two solutions that I always find, but don't resolve my problem.
Three fixes to make here:
No spaces -> xmlns:converter="clr-namesapce:MyApp.Converters,aseembly=MyApp"
No misspellings -> xmlns:converter="clr-namespace:MyApp.Converters,assembly=MyApp"
Right delimiters -> xmlns:converter="clr-namespace:MyApp.Converters;assembly=MyApp"
From the the documentation:
Note that the character separating the clr-namespace token from its value is a colon (:) whereas the character separating the assembly token from its value is an equals sign (=). The character to use between these two tokens is a semicolon. Also, do not include any whitespace anywhere in the declaration.
Another possible solution to this problem is that you're not using the same version of .Net in your project and your library.
I am exploring as to why this is happening, but if your converter is in the main assembly, removing the assembly= from your xmlns:converters tag should remove that build error.
For the record ...
I've face a similar problem and if I removed the ";assembly=X" part from the XAML it worked fine
But don't really understand the reason.
As suggested in this blog:
http://zoomicon.wordpress.com/2012/07/02/fix-the-tag-xxx-does-not-exist-in-xml-namespace-clr-namespaceyyy/#comment-7761
I see two possible causes. The first is that you misspelled "assembly" as "aseembly" in the first starred line. Changing the spelling might be enough. The second possibility is that you haven't added MyApp.dll to your project references, which appear like this
in Visual Studio.
All answers are right. And after trying all of them and you cannot configure why its happening, everything seems alright, Please restart the Visual studio.
That worked for me after wasting almost 1 hour. I found everything ok, but restarted the VS with administration.
use the assemble tag only if it is in another project.
other wise use just namespace tag alone.
For me this fixed the issue
In my situation, I had the same problem with xmlns:local="clr-namespace:<mydefaultnamespace>".
I solved this changing the order of the includes. I put it first and all was solved.
A strange behaviour, but this was my workaround that I found in my situation.
In my case, the assembly which contained the namespace was not physically there.
I checked the references of the assembly that had the build error and looked at the properties of the referenced assembly in question.
I navigated to the path and discovered the assembly was indeed missing (which I realised was my own doing), giving rise to the misleading error.
There is one very obscure case when you get this error - if you're using Microsoft.mshtml.dll and you upgrade to Windows 10 anniversary edition, or as it turns out the Creator edition too.
Even if this isn't what happens to you make sure the library containing the component that cannot be found can be fully compiled. Look in the error list (not the grid but the Output console) for any clues.
In my case I was using Microsoft.mshtml.dll as part of an HTML editor and it was unregistered somehow (in the GAC).
The following article explains with screenshots:
https://techninotes.blogspot.com/2016/08/fixing-cannot-find-wrapper-assembly-for.html#comment-form
In short I had to run a Visual Studio command prompt (as admin) run these commands:
cd C:\Windows\assembly\GAC\Microsoft.mshtml\7.0.3300.0__b03f5f7f11d50a3a
regasm Microsoft.mshtml.dll
I did say obscure :-) The important point is to read the errors that may be buried amongst all your warnings because there might be an important clue.
This can be especially confusing if an Operating system update suddenly breaks your project.
I was temporarily replacing a NuGet dll with a local one when this happened. Turned out the assembly was not the same version as the one I was replacing. I built my assembly with the correct version and it worked.
I have this kind of code in some applications (from microsoft)
[assembly: System.Diagnostics.CodeAnalysis.SuppressMessage(
"Microsoft.Naming",
"CA1702:CompoundWordsShouldBeCasedCorrectly",
MessageId = "CounterClockwise",
Scope = "member",
Target = "ScePhotoViewer.PhotoDisplayControl.#RotatePhotoCounterClockwiseCommand"
)]
Can anyone explain me this ?
Is there any blog explaining how to use it, the real benefits...
Thanks
Jonathan
This attribute is used by Team Foundation Server's (TFS) code analysis functionality to exclude code fragments that would otherwise trigger warnings. You can safely remove them if you're not using TFS code analysis.
The attributes can be added by hand or, more usually, are added automatically via the Visual Studio GUI when the "Suppress Message" option is selected in the error list.
This attribute simply suppresses the generation of the specified warning messages during code analysis by TFS. No code is is excluded.