I'm trying to find a way to change the content of a window in WPF without having to load a new window. In most cases, the following works just fine:
dim x as new window
x.show()
me.close
Is there a way to do something like the following?
dim x as new window
me.content = x
This answer is a bit delayed. I ran into a situation where I needed to change all or part of the contents of a window, so as suggested by wpf-it - I used ContentControl.
The window I used this in is being used with a barcode scanner. We have a handful of item types that can be scanned with a different set of options and displays needed for each. Since our app is written in the MVVM pattern (Or at least... MVVM-esque ;) ) I created some XAML:
<ContentControl Grid.Row="2" Content="{Binding itemOptions}" />
Which is then bound to this property:
Public ReadOnly Property itemOptions As UserControl
Get
Select Case SearchResult.GetType()
' Part
Case GetType(partHeaderModel)
Try
Return New partOptions
Catch ex As Exception
' Fail
' Return New noResults
End Try
' Bin
Case GetType(binModel)
Try
Return New binOptions
Catch ex As Exception
' Fail
Return New noResults
End Try
' Rack
Case GetType(rackModel)
Try
Return New rackOptions
Catch ex As Exception
' Fail
Return New noResults
End Try
Case Else
End Select
Return New noResults
End Get
End Property
I have a search function which returns a data model based on the type of item the user scans. Based on the type, the select statement returns the property user control. I use INotifyPropertyChanged along with the scan event to get the window to update.
Check this topic: How to get reference to element in resources, WPF?
Read, that it can help .. There are thousands of ways to work, so you must find his or better.
An old concept which was used is the MDI:
http://www.codeproject.com/Articles/22927/Multiple-Window-Interface-for-WPF
How about setting all the possible configurations of your windows in one window, and toggling the visibilities of whatever you want to show and not show as and when needed?
That will make it easier to customize rather than manually modifying the Visual Tree. However remember to keep any panels virtualized or your performance could take a hit.
Did you explore ContentPresenter / ContentControl option in WPF? Keep a content presenter / content control in your window, and set their Content property dynamically... this way you will not need to reload the window.
Related
I have a tab that is bound to a property. I want the tab to change color under specific conditions but if those conditions are not met I would like the tab to go to the system default for a tab. I know how to change the color but not to get it to go to the system default. Any suggestions?
WPF:
<TabItem Header="Initial" Name="tab_1Initial" Background="{Binding Path=initialTab.tabColor}">
VB.NET:
tabColor = New BrushConverter().ConvertFrom("#FF89DE93")
VB.NET:
Public Property tabColor As Brush
Get
Return _tabColor
End Get
Set(value As Brush)
_tabColor = value
NotifyPropertyChanged("tabColor")
End Set
End Property
The best thing i van think of, is using an method with a couple of if statements. When the tab condition is changed, call that method to check to what color it should be changed to.
I have a custom control that has two dependency properties. They are set as such:
Public Shared ReadOnly ValueBindingProperty As DependencyProperty = _
DependencyProperty.Register("ValueBinding", GetType(String), GetType(HomePageControl), New PropertyMetadata(String.Empty))
Public Property ValueBinding As String
Get
Return DirectCast(Me.GetValue(HomePageControl.ValueBindingProperty), String)
End Get
Set(value As String)
Me.SetValue(HomePageControl.ValueBindingProperty, value)
End Set
End Property
I assess them in the PropertyChangedCallback of another DP like this:
Dim hpc As HomePageControl = DirectCast(d, HomePageControl)
Dim valueBindingString as String = hpc.ValueBinding
And then I use it where I need it.
The value is there the first time that the page is loaded and the control is loaded. Once I navigate away from the page - using Silverlight navigation loading a new "view" into the frame - the value disappears and when I go back to the page/view that the control is on the value equals the default value instead of what it is set to in the xaml. What happened to the value?
I have other DP that are strings that remain set. As far as I can tell these two are set the same as the others. Why would these lose their value when the others don't?
When navigation occurs, Silverlight removes the old page from the tree and adds a new one which has just been created. Therefore, when you navigate to a URI and come back, you get a new control which is in its default state.
You should store the state of the controls somewhere aside from them. It may be an in-memory object or a server-side database table. The choice depends on your requirements. Probably, the best and a universal approach is applying the MVVM pattern.
I'm writing tests which will check correctness of Binding elements specified in XAML. They work so far, the only issue is that I do not know how to correctly force databinding to happen. Surprisingly it is not enough to simply set something in DataContext, binding won't happen until you show your control/window. Please not that I'm writing 'unit'-tests and I'd like to avoid showing any windows.
Take a look at following code:
// This is main class in console application where I have all WPF references added
public class Program
{
[STAThread]
public static void Main()
{
var view = new Window();
BindingOperations.SetBinding(view, Window.TitleProperty, new Binding("Length"));
view.DataContext = new int[5];
//view.Show(); view.Close(); // <-- this is the code I'm trying not to write
Console.WriteLine(view.Title);
}
}
Here I'm creating a Window and putting an array as DataContext to that window. I'm binding Window.Title to Array.Length so I expect to see number 5 printed in console. But until I Show window (commented line) I will get empty string. If I uncomment that line then I will receive desired 5 in console output.
Is there any way I can make binding happen without showing a window? It is pretty annoying to look at ~20 windows while launching tests.
P.S.: I know I can make windows more transparent and etc, but I'm looking for more elegant solution.
UPDATE Code above is simplified version of what I really have. In real code I receive a View (some UIElement with bindings) and object ViewModel. I do not know which exactly binding there were set on View, but I still want all of them to be initialized.
UPDATE 2: Answering to the questions regarding what I test and I why. I do not intend to test that classes like Binding, BindingBase, etc are working as expected, I assume they are working. I'm trying to test that in all my XAML files I have written bindings correctly. Because bindings are stringly typed things, they are not verified during compilation and by default they cause only errors in output window, which I'm missing occasionally. So if we take my example from above and if we will made a typo there in binding: {Binding Lengthhh} then my tests will notify you that there is no property with name Lengthhh available for binding. So I have around 100 XAML files and for each XAML I have a test (3-5 lines of code) and after launching my tests I know for sure that there are no binding errors in my solution.
The bindings are updated by the dispatcher with the DispatcherPriority.DataBind - so if you wait for a dummy task with SystemIdle priority you are sure that any pending databinding is done.
try
{
this.Dispatcher.Invoke(DispatcherPriority.SystemIdle, new Action(() => { }));
}
catch
{
// Cannot perfom this while Dispatcher in suspended mode
}
If you are trying to test correctness of your view, I suggest you test your view :-)
Why not run the UI from a unit test and write code that checks content of UI after changing data.
VS2010 does have GUI testing, or you could take a look at the code of tools such as Snoop.
Edit following comment:
If ALL you want to do is test a few simple bindings, try writing a static code test that runs as a post build event using reflection on view models and regular expressions on XAMLs. Add attributes on VM or use a config file so your test will know which view receives which View Model as DataContext. Compare property names and types in View Models with binding strings in View (automatically search XAML for these) and throw exception (thus failing build) if strings do not match.
If your bindings are more complex (converters, multibindings, ...) this may be a bit more complicated to implement.
I think you should first set the DataContext and then do the Binding, e.g.:
view.DataContext = new int[5];
BindingOperations.SetBinding(view, Window.TitleProperty, new Binding("Length"));
I'm not sure if this is real solution for your general problem, but it works in this case.
I don't believe the Window's bindings will run without calling Show or ShowDialog, because that is the only way it gets associated with the UI message loop/dispatcher.
Your best bet would be to set it to be as least visible as possible, potentially using an extension method to clean things up:
public static void PokeWindowDispatcher(this Window window)
{
window.WindowState = WindowState.Minimized;
window.ShowInTaskbar = false;
window.Visibility = Visibility.None;
using (var wait = new ManualResetEvent())
{
Action<object, RoutedEventArgs> loaded = (sender, e) => wait.Set();
window.Loaded += loaded;
try
{
window.Show();
wait.WaitOne();
}
finally
{
window.Loaded -= loaded;
window.Close();
}
}
}
I had the same problem, and from sixlettervariables gave me an idea. It's very simple.
I am using WPF in WinForms application, so I use ElementHost control to host Wpf controls on WinForms control. To enforce WinForms control initialization you can just read value of Handle (which is actually Windows HWND) and this will force control to fully initialize itself including child ElementHost and all Wpf binding work.
I didn`t try to perform the same thing for pure Wpf control. But you can easily use ElementHost to initialize your Wpf controls like this:
var el = new ElementHost();
var p = new TextBlock();
p.DataContext = new { Data = "1234" };
p.SetBinding(TextBlock.TextProperty, "Data");
el.Child = p;
var t = el.Handle;
Debug.Assert(p.Text == "1234");
PS: Found, that everything work better, if you first set DataContext and only then force a Handle to be created (just like my example). But, I think, this is already the case for you, so should not be a problem.
Have you tryed to use the IsDataBound
http://msdn.microsoft.com/en-us/library/system.windows.data.bindingoperations.isdatabound.aspx
Also check this out:
System.Windows.Interop.WindowInteropHelper helper = new System.Windows.Interop.WindowInteropHelper(view).EnsureHandle();
http://msdn.microsoft.com/en-us/library/system.windows.interop.windowinterophelper.ensurehandle.aspx
My other question is why you trying to do a UNIT test on something that has been technically tested already? By the way I am not critising, just want to understand a little better.
Not sure, but maybe something like this will work?
view.GetBindingExpression(Window.TitleProperty).UpdateTarget();
I've started to make myself a list of "WPF gotchas": things that bug me and that I had to write down to remember because I fall for them every time....
Now, I'm pretty sure you all stumbled upon similar situations at one point, and I would like you to share your experience on the subject:
What is the gotcha that gets you all the time? the one you find the most annoying?
(I have a few issues that seem to be without explanation, maybe your submissions will explain them)
Here are a few of my "personnal" gotchas (randomly presented):
For a MouseEvent to be fired even when the click is on the "transparent" background of a control (e.g. a label) and not just on the content (the Text in this case), the control's Background has to be set to "Brushes.Transparent" and not just "null" (default value for a label)
A WPF DataGridCell's DataContext is the RowView to whom the cell belong, not the CellView
When inside a ScrollViewer, a Scrollbar is managed by the scrollviewer itself (i.e. setting properties such as ScrollBar.Value is without effect)
Key.F10 is not fired when you press "F10", instead you get Key.System and you have to go look for e.SystemKey to get the Key.F10
... and now you're on.
Always watch the output window for
binding errors. Ignoring the output
window is a recipe for tears.
Use PresentationTraceOptions.TraceLevel="High" in a binding to get verbose binding information when debugging binding failures.
Make static, unchanging resources such as brushes PresentationOptions:Freeze="True" to save resources at runtime.
Use the WPF DataGrid as a datagrid. Modifying it to behave like Excel is a massive pain in the butt.
BindingList<T> does not play well with CollectionViewSource. Expose ObservableCollection<T> from your viewmodels instead.
The internet supplies half a dozen different ideas for displaying CueBanner text in a WPF textbox. They are all broken.
1) One that used to get me every half an hour when I was making my transition from WinForms: use TextBlock instead of Label when putting random text on the UI (or don't use any tag at all, if the text is static)!
2) DataTriggers/Triggers can't be put into Control.Triggers, but have to go into Control.Styles/Style/Style.Triggers
3) Property's type must implement IList, not IList<T>, if the property is to be recognized by XAML as a collection property.
4) Bindings capture exceptions.
5) Use singleton converters/static converter class, so you don't have to create a new converter every time you use it.
6) A type for default value of DependencyProperty has to be clearly specified: 0u as uint, (float) 0 as float, 0.0 as double...
7) It matters if the control's property definitions are before or after its content.
8) NEVER use PropertyMetadata to set a default value of reference type DependencyProperty. The same object reference will be assigned to all instances of the owning class.
When first starting out, the main gotchas that would get me would be
Lists not updating due to forgetting
to use ObservableCollection
Properties not being updated either
forgetting to add OnPropertyChanged
or incorrectly typing the property
name
Recently I have stumbled across these issues
Application failing to start due to
corrupt font cache
StringFormat localization issues
If enabled, Button.IsCancel assigns false to Window.DialogResult but Button.IsDefault no.
They are so similar and for me it seemed intuitive at first that both should close dialog. I usually break MVVM and fix this in code-behind
Button.IsCancel + Command = Dialog won't close (Window.DialogResult left unassigned) but Command executes
As I understand it: If IsCancel had higher priority than Command then on Esc it would assign 'false' to DialogResult and Command won't be called. Or, if Command would have higher priority then it would be called first and DialogResult would be assigned. I don't understand how it is skipped?
Binding swallows exceptions!
It not only steals time while debugging it is also wrong from the OOP point of view because if exception is thrown it means that something exceptional had happened somewhere in our system (anything from wrong data supply to unauthorized access to memory failure) so it can be handled only if you know what to do. You can't just catch(Exception){} catch 'em all and then ignore. If there is unknown exception in program it should notify user, log and close not pretend like everything is ok...
HeaderContent can have only one child control and has no padding
Everything should have padding even logical controls (containers), right? I think it is inconsistent. What do you think?
If you set focus to ListBox via FocusManager.FocusedElement you still won't be able to switch it's content with keyboard because focus is set to ListBoxes frame not it's content. I think I don't know other UI API that would expose something like controls frame to UI programmer it should be encapsulated from us because abstractly ListBox represents a list, it is just a list of things not a list of things in a box. ok it has box in its name but still... We almost have two different controls here.
MVVM not breaking fix
ListBox.IsSynchronizedWithCurrentItem by default is false so if you assign different value or null to ItesSource then SelectedItem still holds old value until user selects something from a new list. It could mess up CanExecute for example. Need to set it every time by hand.
No binding exposed in PasswordBox results in time waste and dirty hacks... But still it has a string property PasswordBox.Password exposed so don't even try to argue about security because Snoop...
It is not a gotcha but table layout is so IE6 IMO. Container design helps separate content from its layout.
Because every time I need to change something in places I need to mess up with Grid.Row and Grid.Column. Yes, we have DockPanel, StackPanel and others but you can't do some column alignment inside of them. (And DockPanel is like completely separate gotcha) If UniformGrid would be more customizable it would be ideal I think. You always need to choose between Grid and Panels and usually if you gain something you loose something else.
I got a pretty nifty one last week:
When Templating a RichTextBox, the event handling inside the template follows a strange route that has nothing to do neither with tunnelling nor bubbling
e.g.: In the case of an event that is supposed to tunnel: the event first tunnels through the ContentPresenter, then it tunnels back from the top of the template.
see my question on the subject
ToolTips and ContextMenus not sharing the DataContext of its owner? I think that gets everyone at first
There is no clean way to handle validation in WPF, I am not a fan of magic string which IDataErrorInfo offers by default:
public string this[string columnName]
{
if (columnName == "FirstName")
{
if (string.IsNullOrEmpty(FirstName))
result = "Please enter a First Name";
}
}
However, I have tried many frameworks like SimpleMVVM, FluentValidation and MVVMValidation and BY FAR MVVM Validation is the best getting to do stuff like:
Validator.AddRule(() => RangeStart,
() => RangeEnd,
() => RuleResult.Assert(RangeEnd > RangeStart, "RangeEnd must be grater than RangeStart");
My personal favorite is this one:
public double MyVariable
{
get { return (double)GetValue(MyVariableProperty); }
set { SetValue(MyVariableProperty, value); }
}
public static readonly DependencyProperty MyVariableProperty = DependencyProperty.Register(
"MyVariable", typeof(double), typeof(MyControl), new UIPropertyMetadata(0));
Try it, once this property is declared it will crash. Why? Because 0 can't be assigned to a double using reflection apparently.
Not really a gotcha but an advice: Use Snoop or something similar, if you don't use it you must be crazy ... Crazy i tell ya!
Binding.StringFormat only works if the type of the target property is string.
TreeView's SelectedItem property is not settable. Instead you have to bind TreeViewItem's IsSelected property to your item's viewmodel and set your selection there.
ListBox's SelectedItem, on the other hand is settable, but item selection is not equal to item focus. If you want to implement proper keyboard navigation along with selecting items from within viewmodel, you have to implement manual focus fix, like:
public void FixListboxFocus()
{
if (lbFiles.SelectedItem != null)
{
lbFiles.ScrollIntoView(lbFiles.SelectedItem);
lbFiles.UpdateLayout();
var item = lbFiles.ItemContainerGenerator.ContainerFromItem(viewModel.SelectedFile);
if (item != null && item is ListBoxItem listBoxItem && !listBoxItem.IsFocused)
listBoxItem.Focus();
}
}
...and call it every time you change selected item from viewmodel:
SelectedFile = files.FirstOrDefault();
viewAccess.FixListboxFocus();
I have a ComboBox with a list of objects bound to it.
Currently i have the items templated so they show only the property Class.Name. so the ComboBox is full of Class.Name
However i am required to give the user the option to display the property Class.Description instead. If it were just that easy i would be fine, but they want the option to switch back and forth between them at runtime.
Any ideas?
You can probably do this directly in WPF.
I would alter the business objects to include an additional Readonly property, something like, DisplayTextProperty
Public ReadOnly Property DisplayTextProperty()
Get
If ShowDescription Then
Return Description
Else
Return Name
End If
End Get
End Property
I have done this in a few places now and it works great.