How to store Array of Strings in Isolated Storage?
You have two options:
1. To store it in a file.
2. To store it as a dictionary
For your purposes, I think you should store it in a file. What you need to do is
1. Create a new file.
2. Open the file. (The createFile function opens the file for you and returns the pointer. So, you won't need to open the file if you are going to write it immediately after creation.)
3. Iterate through the array and write the strings to the file.
4. Close the file.
For more information on file IO, visit this link:
http://create.msdn.com/en-US/education/quickstarts/Isolated_Storage
This explains it pretty well.
Related
I store opened files in a map: HashMap<u32, File>. Sometimes functions read_to_file and write_to_file are called. They get the file from the map and make the corresponding procedure. In order to avoid conflicts in writing and reading from the same file, I need to close the file. How can I do it?
According to the Rust documentation std::fs::File is:
A reference to an open file on the filesystem.
If you are storing Files in a map then they are, by definition, open. They close automatically when the variable is dropped (goes out of scope).
Instead, you may consider storing a Path in the map, and open the file on demand. If you need to store open files for some reason, then you can wrap them in an Arc<Mutex> (or an `Rc if your application is single-threaded), to prevent simultaneous access.
I wonder how can I update an existing file, and add a word in a given position.
so let say my file looks like:
this the first line in the file
and I want to add the word "is " in position 6 so the file will look like:
this is the first line in the file
what is the best method to achieve that?
what should be the fopen mode?
assume my file is to big to copy to memory, or create a temporary clone
thanks!
There is no magic "insert in the middle" open mode. You have to do that yourself.
If it can't fit in memory, and you don't want/can't create a temporary, you can rewrite it "from the bottom". (I.e. read the last "block", write it back shifted by the amount you want, repeat.)
Unfortunately, it is not possible to simply update a file this way. If it is a flat file, you will have to move the parts yourself.
I have opened a file using a and r+ but when I use fseek and ftell the file pointer is always 0.
My file looks like this:
1 -3
2 -8
And I want to add another line between the two but it is added in the end after the last line.
Someone in another forum said that when you open the file in append the pointer is always zero and you have to open it in r+ and if that doesn't work "you have to read the complete data and then insert the data in the variables and write it back." but I don't understand what they mean by that.
Can anyone help with inserting numbers in the middle of a file?
Thanks!
Would something like this work?
To transfer the data?
rewind(fp);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
fseek(fp,1,0);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
Like others already said, there's no easy way to insert data in the middle of a file. If you really want to do this, you can implement the following steps:
Create a second file
Copy all data before the place you want to insert to the second file
Insert the line you want to the second file
Copy the remaining data to the second file
Delete the original file
Rename the second file
Other approach is using binary files instead of text files. Although binary files are a bit harder to learn, once you understand how they work you'll see that working with them is much like working with arrays. To perform this task, for example, you'd not even need to use an auxiliary file.
There is no open mode that will allow you to "insert" data into a file at a random point. The only place you can add data without overwriting existing data is the end of the file (what you get opening with mode "a").
If you want to insert at a random position, you need to do it yourself.
One of the easier ways is to re-write the file completely (transfer the start of the old file to a new file, add your data to the new file, transfer the rest of the old file, and rename/overwrite at the end).
The hard way: you need to "shift" all the data from your insertion point to the end-of-file manually. That's not trivial to get right.
There isn't an easy way to insert data in the middle of the file. A file is basically an array of characters. To add a character in the middle, you need to copy everything following your insertion point down one location. With a file you need to read the data that follows and write it after your addition.
Generally, when you want to do something like this you create a new file. You copy the old file into it up to the point where you want to insert, then you write the data you want to insert, then you copy the rest of the old file. Finally, you rename the new file to the old file.
How can I delete few characters from a file using C program?
I could not find any predefined functions for it.
To understand the purpose, I am trying to send a file through a socket, if N bytes are sent successfully, I want to delete those bytes from the file. At the end, the file will be empty.
Any other way to do this efficiently?
Thanks
Pradeep
If they're at the end, truncate the file at the appropriate length. If they're not then you'll need to rewrite the file.
Your way is pretty inefficient for large files, since you would have to copy "the rest of the file" some bytes further to the beginning, which costs much. I would rather record the "current sending position" somewhere outside of the file and update that information. That way, you don't have to copy the rest of the file so often.
There is no straightforward way to delete bytes from the beginning of a file. You will have to start from where you want to trim the file, and read from there to the end of the file, writing to the start of the file.
It might make more sense to just track how many bytes you have already written to the file in some other file.
you should use an index which points to the beginning of the data you haven't sent yet.
It is not necessary to delete what you have sent, just pass them, when you send the whole file delete it.
If the char's are one after the other than why dont you give a try to fseek();
How can I go back to the very beginning of a csv file and add rows?
(I'm printing to a CSV file from C using fprintf(). At the end of printing thousands of rows (5 columns) of data, I would like to go back to the top of the file and insert some dynamic header data (based on how things went printing everything). )
Thank You.
Due to the way files are structured, this is more or less impossible. In order to accomplish what you want:
write csv data to file1
write header to file2
copy contents of file1 to file2
delete file1
Or you can hold the csv data in ram and write it to file after you're finished processing and know the header.
Another option is to set aside a certain number of bytes for the header, which will work much faster for large files at minimal space cost. Since the space is allocated in the file at the start of the write, there aren't any issues going back and filling it in. Reopen the file as random access ("r+"), which points to the top of the file by default, write header, and close.
The simplest way would be to simply store the entire contents of the file in memory until you are finished, write out the header, and then write out the rest of the file.
If memory is an issue and you can't safely store the entire file in memory, or just don't want to, then you could write out the bulk of the CSV data to a temporary file, then when you are finished, write the header out to the primary file, and copy the data from the temporary file to the primary file in a loop.
If you wanted to be fancy, after writing the main CSV data out to the primary file, you could loop through the file from the beginning, read into memory the data that you're about to overwrite with the header, then write the header over top of that data, and so forth, read each chunk into memory, overwrite it with the previous one until you reach the end and append the final chunk. In this way you "insert" data at the beginning, my moving the rest of the file down. I really wouldn't recommend this as it will mostly just add complexity without much benefit, unless there is a specific reason you can't do something simpler like using a temporary file.
I think that is not possible. Probably the easiest way would be to write the output to a temporary file, then create the data you need as the dynamic header, write them to the target file and append the previously created temporary file.
write enough blank spaces in the first line
write data
seek(0)
write header - last column will be padded with spaces