I'm running Solr + Nutch and need to get a snippet of each result. I tried setting hl to true in the query URL but I still get the same XML result (without snippets). Any ideas on how to get this done?
You need to specify the fields that you want highlight results returned for by passing field names to the hl.fl parameter in your query. Please see HighlightingParameters on the Solr Wiki for more details and examples.
Related
I'm querying mulitple fields using the qf param. But I'm wondering how I can retrieve the field that gave the result.
Example(not a real example):
q={!edismax qf='tag content'}("tablet")AND("pc")
Field values:
doc1:
tag: tablet
content: The test has failled. Use a pc instead.
doc2:
tag: tablet pc
content: The test has worked.
As a result both documents will be returned because they both have the tablet and pc in their tag/content. Is it possible to know that doc2 had both hits in tag and doc1 only had 1 hit in tag and 1 in content? Debugquery doesn't seem to provide information about this.
I know I can increase the importance of a searchfield using the qf boost.
you can either:
use Highlighting
ask for debug info with debugQuery=true and parse the scoring info to find out.
I think 1 is easier, but it imposes some constraints on your fields (they must be stored for example)
Ok based on your response to my question.
Unfortunately, there is no way Solr currently returns which fields matched the query as part of your defaulting result docs . If the query is simple, looping over the returned stored fields is probably your best bet. Highlighting is be an option too.
There are couple of other options suggested here : http://grokbase.com/t/lucene/solr-user/117nkf36nq/determine-which-field-term-was-found
Whenever i query with q=: it shows all the documents but when i query with q=programmer 0 docs found.(contents is the default search field)
my schema has: id(unique),author,title,contents fields
Also query works fine for:
q=author:"Value" or q=title:"my book" etc, only for contents field no results.
Also when i query using spell checker(/spell?q=programmer) output shows spelling suggestions for this word,when 'programmer' is the right word and present in many documents.
I referred the example docs for configurations.
All of a sudden i am getting this,initially it worked fine.
I guess there some problem only in the contents field,but cannot figure it out.
Is it because indexes are not created properly for contents field?
(I am using solr 4.2 on Windows 7 with tomcat as webserver)
Please help.Thanks a lot in advance.
Are you sure you set the default search field? The reason you have this problem might be because you didn't set the <defaultSearchField> field in your schema.xml file. This is why "q=author:value" works while q=WHATEVER doesn't.
The Is used by Solr when parsing queries to
identify which field name should be searched in queries where an
explicit field name has not been used.
But also consider this:
The is used by Solr when parsing queries to
identify which field name should be searched in queries where an
explicit field name has not been used. It is preferable to not use or
rely on this setting; instead the request handler or query LocalParams
for a search should specify the default field(s) to search on. This
setting here can be omitted and it is being considered for
deprecation.
Do you have any data in your instance. try q=*:* and see what it returns. "for" is a stop word, may be it was filtered out. Look for something else as value to test.
Is it possible to do a spellcheck and a search (using topmost collated suggestion from the list) within a single Solr request?
I see that if my query is spelled correctly, I get search results returned. But if the query is misspelled, I get suggestions and collations only.
Any pointers will be very helpful.
You need to use 1) spellcheck.collate=true 2) behind the scenes analyze the collation and re-execute the query .
Documentation here: http://wiki.apache.org/solr/SpellCheckComponent#spellcheck.collate
I am trying to query Solr with following requirement:
_ I would like to get all documents which not have a particular field
-exclusivity:[* TO *]
I would like to get all document which have this field and got the specific value
exclusivity:(None)
so when I am trying to query Solr 4 with:
fq=(-exclusivity:[* TO *]) OR exclusivity:(None)
I have only got results if the field exists in document and the value is None but results not contain results from first query !!
I cannot understand why it is not working
To explain your results, the query (-exclusivity:[* TO *]) will always get no results, because you haven't specified any result to retrieve. By default, Lucene doesn't retrieve any results, unless you tell it to get them. exclusivity:(None) isn't a limitation placed on the full result set, it is the key used to find the documents to retrieve. This differs from a database, which by default returns all records in a table, and allows you to limit the set.
(-exclusivity:[* TO *]) only specifies what NOT to get, but doesn't tell it to GET anything at all.
Solr has logic to handle Pure negative queries (I believe, in much the same way as below, by implicitly retrieving all documents first), but from what I gather, only as the top level query, and it does not handle queries like term1 OR -term2 documented here.
I believe with solr you should be able to use the query *:* to get all docs (though that would not be available in raw lucene), so you could use the query:
(*:* -exclusivity:[* TO *]) exclusivity:(None)
which would mean, get (all docs except those with a value in exclusivity) or docs where exclusivity = "None"
I have founded answer to this problem. I have made bad assumption how "-" works in solr.I though that
-exclusivity:[* TO *]
add everything without exclusivity field to the data set but it is not the case. The '-' could only exclude things from data set. BTW femtoRgon you are right but I am using it as fq (filter query) not as a master query I have forgotten to mention that.
So the solution is like
-exclusivity:([* TO *] AND -(None))
and full query looks like
/?q=*:*&fq=-exclusivity:([* TO *] AND -(None))
so that means I will get everything does not have field exclusivity or has this field and it is populated with value None.
Solr newbie here.
I have created a Solr index and write a whole bunch of docs into it. I can see
from the Solr admin page that the docs exist and the schema is fine as well.
But when I perform a search using a test keyword I do not get any results back.
On entering * : *
into the query (in Solr admin page) I get all the results.
However, when I enter any other query (e.g. a term or phrase) I get no results.
I have verified that the field being queried is Indexed and contains the values I am searching for.
So I am confused what I am doing wrong.
Probably you don't have a <defaultSearchField> correctly set up. See this question.
Another possibility: your field is of type string instead of text. String fields, in contrast to text fields, are not analyzed, but stored and indexed verbatim.
I had the same issue with a new setup of Solr 8. The accepted answer is not valid anymore, because the <defaultSearchField> configuration will be deprecated.
As I found no answer to why Solr does not return results from any fields despite being indexed, I consulted the query documentation. What I found is the DisMax query parser:
The DisMax query parser is designed to process simple phrases (without complex syntax) entered by users and to search for individual terms across several fields using different weighting (boosts) based on the significance of each field. Additional options enable users to influence the score based on rules specific to each use case (independent of user input).
In contrast, the default Lucene parser only speaks about searching one field. So I gave DisMax a try and it worked very well!
Query example:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video
You can also specify which fields to search exactly to prevent unwanted side effects. Multiple fields are separated by spaces which translate to + in URLs:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video&qf=features+text
Last but not least, give the fields a weight:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video&qf=features^20.0+text^0.3
If you are using pysolr like I do, you can add those parameters to your search request like this:
results = solr.search('search term', **{
'defType': 'dismax',
'qf': 'features text'
})
In my case the problem was the format of the query. It seems that my setup, by default, was looking and an exact match to the entire value of the field. So, in order to get results if I was searching for the sit I had to query *sit*, i.e. use wildcards to get the expected result.
With solr 4, I had to solve this as per Mauricio's answer by defining type="text_en" to the field.
With solr 6, use text_general.