I'm trying to run the build script from HTML5 Boilerplate and I have to install YUM for that. I am on Mac OS Snow Leopard 10.6.8. When I did sudo port install yum, i'm getting the following error. Any idea how can I rectify it and install yum properly?
---> Computing dependencies for py24-nose
---> Dependencies to be installed: py24-distribute
---> Activating py24-distribute #0.6.24_0 Error: Target org.macports.activate returned: Image error:
/opt/local/lib/python2.4/site-packages/setuptools-0.6c11-py2.4.egg-info
already exists and does not belong to a registered port. Unable to
activate port py24-distribute. Use 'port -f activate py24-distribute'
to force the activation. Error: Failed to install py24-distribute Log
for py24-distribute is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-distribute/py24-distribute/main.log
Error: The following dependencies were not installed: py24-distribute
Error: Unable to upgrade port: 1 Error: Unable to execute port:
upgrade py24-nose failed To report a bug, see
<http://guide.macports.org/#project.tickets>
Previously after installing YUM, i was getting Segmentation Fault, so I uninstalled and installed it again using Macports to get the above error.
I think you've got the wrong end of the stick here. You do not need to install YUM on the Mac. In fact, that act is sheer madness, because you already have a perfectly good package manager in the shape of MacPorts!
Read again what it says
If you're on Mac or Linux...
You've got all your dependencies pre-installed, likely. You may need a yum install ant-contrib or what have you.
The key bit there is "or what have you". That is a cryptic way of saying "or the equivalent command for your package manager". On Red Hat-based systems, the package manager is indeed YUM; on Debian systems, it's APT; on the Mac, it's MacPorts.
So, remove your YUM installation, and simply do:
port install ant-contrib
You can now proceed to actually running Ant.
Related
The goal is to install Microsoft Driver for SQL Server on Ubuntu 18.04 to write scripts using python package pyodbc.
I make steps according this article. The problem is when I run command sudo ACCEPT_EULA=Y apt-get install msodbcsql17 then I recieve next error message:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
msodbcsql17 : Depends: unixodbc (>= 2.3.1) but it is not installable
E: Unable to correct problems, you have held broken packages.
Only relevant discussion of this problem is here. But I have already tried all recomendations:
Remove all relevant packages
Use clean system
Build unixodbc manually
Nothing helped me. Does anyone met same problem or have guide how to install this driver on clean Ubuntu 18.04 server system?
I've been trying to install MacPorts on a new Mac Pro with a fresh, fully updated Yosemite OS. The installer hangs on 'Running package scripts'. So I tried to build it from source. That works, with the installer stating:
Congratulations, you have successfully installed the MacPorts system.
However, it seems unusable. When I do sudo port install apache2 I get the message:
Error: Port apache2 not found
Simply trying to do a 'self update' (as root):
sh-3.2# port -d selfupdate
DEBUG: MacPorts sources location: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs
---> Updating MacPorts base sources using rsync
receiving file list ... done
base.tar
...and then nothing... I've waited for half an hour, but it won't go any further. I can't find any logs either.
Again: there's nothing special about my setup, it's out-of-the-box Yosemite, only updated through the App store and, of course, I've installed Xcode with command line utilities and formally accepted the license, as is required according to the MacPorts site.
I've also tried uninstalling it, using the instructions from the MacPorts site, and reinstalling. But it does not make a difference.
I've read quite a few forum posts, but I can't find any post relating a problem like this. I hope someone can shed some light on this.
The installer hangs running package scripts because the last statement in these package scripts is exactly this "sudo port selfupdate" that you've been running manually afterwards.
Because this step did never run, your MacPorts installation lacks knowledge about the apache2 port (which is exactly why the installer runs selfupdate to give you a full-featured installation).
Unfortunately Apple's infrastructure (rsync.macports.org) seems to have connectivity problems at the moment, which is causing problems for quite a few people. You can try using one of the mirrors as outlined at https://trac.macports.org/wiki/Mirrors.
I have trouble installing PHP, MySQL and Apache2 using MacPorts. Currently my OS is Mavericks and i'm downloading the official binary package for mavericks (also tried compile from source and running selfupdate) but I got this error message:
---> Building readline
Error: org.macports.build for port readline returned: command execution failed
Error: Failed to install readline
Please see the log file for port readline for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_readline/readline/main.log
Error: The following dependencies were not installed: apache2 apr-util mysql5 readline tcp_wrappers sqlite3 libedit pcre bzip2 autoconf213 gawk xz m4 gsed libtool libxml2 mhash pkgconfig
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
Error: Processing of port php5 failed
How can I solve this?
Thanks
Can you please check the error message block within the log file:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_readline/readline/main.log
Also make sure xcode command line tools are installed.
FYI: I faced similar error in Mavericks. My case was:
opt is a different partition which is mounted in /Volumes/opt
/opt is a symbolic link to /Volumes/opt.
It has been solved after editing /opt/local/etc/macports/macports.conf by replacing /opt with /Volumes/opt. Note sure this can help your case.
I am working on R and I need to install the Cairo package.
install.packages("Cairo")
Specification
R version 2.15.0 (2012-03-30)
OS : Red Hat Enterprise Linux Server release 6.1 (Santiago)
I'm getting following error message:
xlib-backend.c:34:74: fatal error: X11/Intrinsic.h: No such file or directory
compilation terminated.
make: *** [xlib-backend.o] Error 1
ERROR: compilation failed for package ‘Cairo’
* removing ‘/usr/local/lib64/R/library/Cairo’
The downloaded source packages are in
‘/tmp/RtmpqtvjPA/downloaded_packages’
Updating HTML index of packages in '.Library'
Making packages.html ... done
Warning message:
In install.packages("Cairo") :
installation of package ‘Cairo’ had non-zero exit status
Had same error. To solve:
Ran the 3 following pieces which were already installed, but doesn't hurt to run and check
yum install libX11
yum install libX11-devel
yum install libXt
Then ran the following which fixed my problem:
yum install libXt-devel
Was able to install.packages("Cairo") afterwards in R 2.15.0 RHEL6.1
On Alpine-linux I fixed this using the following:
apk add cairo-dev
hansarijanto$ port -v
MacPorts 2.0.3
hansarijanto$ xcodebuild -version
Xcode 4.3.2
Build version 4E2002
I am running the above xcode and macport version. on max os x
when I try to self update my mac port I get the following error.
hansarijanto$ sudo port selfupdate
Password:
---> Updating MacPorts base sources using rsync
MacPorts base version 2.0.3 installed,
MacPorts base version 2.0.4 downloaded.
---> Updating the ports tree
---> MacPorts base is outdated, installing new version 2.0.4
Installing new MacPorts release in /opt/local as root:admin; permissions 0755; Tcl-Package in /Library/Tcl
Error: /opt/local/bin/port: port selfupdate failed: Error installing new MacPorts base: shell command failed (see log for details)
I am trying to update mac port to install qt.
sudo port install qt4-mac-devel(error no SDK found)
which I need to install webkit-capybara
sudo gem install capybara-webkit -v '0.7.2'(error in setting up native environment)
You need to use the -d option to get enough information to diagnose this; but take a look at https://trac.macports.org/wiki/FAQ#selfupdatefails for common problems and solutions.
Seems Apple no longer installs Xcode's command line tools. See here: http://ericwilson.erics.ws/ericsblog/2012/8/26/macports-port-selfupdate-fail for solution.
Just wanted to add that on Mac OS 10.12 Sierra i was getting the WARNING: GNUSTEP_SYSTEM_ROOT is not defined error on selfupdate and i did already have the Xcode command line tools installed, licensed and working. But my copy of Xcode had become out of date, even though that was not showing up on the automatic software updates.
I had version 7 and for Sierra (and macports) you need version 8.
So I manually downloaded Xcode 8 via the App Store and it solved the problem for me.