i have installed the cygwin package for my netbeans IDE. I can use that in netBeans project. But now I want to use the gcc compiler from a cmd prompt. How can I do that?
In Linux we open a terminal and type
gcc filename.c
and it compiles. Now I want to do the same thing in Windows with Cygwin's gcc. Can I type gcc filename.c in cmd and it compiles? If so, how?
Edit :
by writing in cmd
gcc --version
I get Access is denied
Edit 1:
In the C: drive I have a folder named Cygwin that contains Cygwin.bat.
When I run that, a new prompt is opened and inside that when I type gcc filename.c, it works.
In that .bat file :
#echo off
C:
chdir C:\cygwin\bin
bash --login -i
I don't understand what that means.
I see from your latest comment that it works when you run gcc from the Cygwin bash shell.
The Access is denied message was appearing when you tried to run gcc from the Windows cmd prompt. I don't know why you'd get that particular message.
My advice is just to use the bash shell. (It also has a lot of nice features that the Windows command shell lacks.) If that's a good solution for you, feel free to stop reading now.
But if you really want to use Cygwin tools (such as gcc) from a Windows prompt, you need to update your Windows %PATH% to include the Cygwin bin directory. As seen from bash, the directory is /usr/bin/; from Windows, it's going to be something like C:\cygwin\bin (assuming you installed Cygwin in C:\cygwin, which is the default).
To permanently add C:\cygwin\bin to your Windows %PATH%, open System Properties in the Control Panel, tap the "Environment variables" button, and adjust the value of Path in "System variables". Once you've done that, newly opened cmd windows should have the new %PATH% setting. (The user interface for modifying environment variables isn't exactly use-friendly; maybe somebody else can suggest a better way.)
EDIT:
The cygwin.bat batch file changes the current director to C:\cygwin\bin and then launches the Cywgwin bash shell in a new window. That gives you an environment in which gcc works by default, since your $PATH is already set up correctly. The windows command shell and the Cygwin bash shell are quite different environments.
If you installed the gcc package for cygwin, you should be able to do simply gcc filename.c.
The setup.exe file of Cygwin lets you choose any additional package you want to add when installing. If you skipped it, simply rerun the setup.exe.
Packages can be also found on the Cygwin website.
does your cmd recognizes gcc as an installed application?
if so, try this
gcc -c filename.c -o filename.o
gcc is actually a link (which the Command Prompt does not understand). Use gcc-3 or gcc-4 if you need to use the Command Prompt.
Related
I am very new to coding (trying to teach myself C). I have some experience with MatLab, but I understand it is very different from C. I have Windows 10 with the newest version of Visual Studio Code (VSC) with the Run Code Extension and git extension (not sure what git does, but VSC prompted me to install). I am now familiar with the text editor, but do not know how to compile/run my code (apologies if I'm butchering the terminology, again, a newby). One friend recommended I determine the location in which the desired text file is located, type "gcc filename.c", enter, type "./a.out", and then the program should run. (Said friend has a Mac and I supposed the execution commands are different?) Regardless, I encountered "Run Code" extension on my google adventures and follow the steps I've seen online, but I am still getting the error pictured.
I can see how this would be an especially basic question, but if anyone can offer assistance/advice, I would be extremely grateful!
Thanks, All.
Sandy
P.S. In case the image doesn't load/work for whatever reason, this is the error:
"'gcc' is not recognized as an internal or external command,
operable program or batch file."
Works perfect in Visual Code. You need the following:
C/C++ extension in Visual Code.
msys64 installed in C:\
Add path to msys64 bin folder in environment variable
Instructions:
https://marketplace.visualstudio.com/items?itemName=ms-vscode.cpptools
Important the msys64 path doesn't contain spaces so don't install it in Program Files.
You can search "Edit system environment variables" from the windows button, press button Environment Variables, and then add it as a System variable "Path". For me its located in
C:\msys64\mingw64\bin
Hey,,,
It will work for you I believe
Blockquote
First: open the link: https://www.msys2.org/
Go to the installation and download the installer .. install the exe file.
search mingw in windows search(windows start)
there is an app named--> MSYS2 MinGW {64/32}-bit
run it as administrator
Found command shell ---> type: pacman -Syu
Will ask you for some installation click on Y
Then again go to the same app MSYS2 MinGW {64/32}-bit and run as admin
and write--> pacman -Ss gcc (in shell that opend after click)
after clicking there will be bunch of things and now you have to care about your windows arch.. if it is 64 bit then write---> pacman -S mingw-w64-x86_64-gcc (and if its 32 you will find something like that where 64 will replaced by 32 in bunch of commands that are showing in your shell)
after executing this command gcc will be installed in your system to check write: gcc --version || g++ --version
After that to install the debugger write pacman -S mingw-w64-x86_64-gdb
to check write: gdb --version
**Every thing got installed in your system now find the mingW file or mysys2 file on C drive(whereever you r mingW file got saved) go the the minGW 64 || 32 accroding to your operating system there is a bin folder click on that and copy the path inside the bin folder and save it in environment variables path **
Blockquote
Enjoy vs code
My recommendation
You are on Windows right? So you can just install Visual Studio IDE (follow this tutorial). Which is better than vs code. This tutorial is for C++ but it works for C as well. Because C++ uses the same compiler as C but with some more things(simple explanation).
The solution for your problem
You are getting the massage 'gcc' is not recognized as an internal or external command, operable program or batch file because you do not have the gcc compiler installed on your computer. But if you want to install it, you can follow this tutorial. But I highly recommend you use Visual Studio IDE which I mentioned above.
Type gcc --version in the command prompt to check whether the C compiler is installed in your machine.
If it is installed then try adding gcc to the environment variables using this link:
https://www.youtube.com/watch?v=qLh84CmdBJ0
If it is not installed then install it using instructions using this link:
https://www.guru99.com/c-gcc-install.html
and then add it to the environment variables using the link above.
If it is installed and not recognized by VSCode then try to run VSCode from CMD by typing code in CMD.
I've installed Eclipse Neon (v4.6). Also, I have "Bash on Ubuntu on Windows" (Sept '16). I installed gcc and gdb for compiling and debugging in C. I tested them on terminal and they're running.
I'm trying to use Eclipse to create a new C project but in the compiler selection stage it doesnt give me the option to use the "Bash on Ubuntu on Windows" compiler.
Is there any way to solve my problem?
Because Bash/WSL is pretty new and the ability to correctly invoke Linux commands from outside Bash (using bash.exe -c ...) is not well understood by many dev tools (yet), you may have to do some work to define custom tasks/actions to call the necessary bash.exe -c "gcc ..." commands that you want to invoke.
However, you should absolutely be able to write/configure a makefile (or, perhaps even better, a CMake file) which can switch paths to lib/include/tools/etc. based on environment and then build smoothly on Windows or in Linux.
This very scenario has sparked an idea for a cool blog post that I'll work on and publish to our blog https://blogs.msdn.microsoft.com/commandline in the next week or two :)
HTH.
I think the best way to use the wsl for programming in C/C++ is like Microsoft does it. Visual Studio use ssh to connect to linux environment for "C++ for Linux Development".
So, in our case we can set up openssh server on wsl, connect to localhost from your IDE and start remote project.
Eclipse and NetBeans supports remote projects.
Clions I think not.
Here are Microsoft's instruction on how to configure Visual Studio
and wsl:
https://blogs.msdn.microsoft.com/vcblog/2017/02/08/targeting-windows-subsystem-for-linux-from-visual-studio/
May 2017
We use Eclipse and a makefile project. I configured Eclipse by adding an "external builder" - and use the following script:
-c "cd `echo '${project_loc}' | sed -e 's/C:/\/mnt\/c/g' -e 's/\\\\/\//g'` && make -f path_to_makefile/makefile
The "cd" and sed trick is to convert from Eclipse "C:\" to Windows Subsystem for Linux "/mnt/c/" and replace "\" with "/"
Make now executes in the project location as defined by ${project_loc}
I still have not figured out how to execute gdb on Linux. But at least compile+link (and execute unit tests as defined in my makefile) is now leveraging the full speed of the native Ubuntu toolchain...
I have some better way...
You can add new user terminal and give "Ubuntu.exe" location in eclipse under Local terminal setup as shown in screen shot.
in my case directory is ...
C:\Users\MyuserName\AppData\Local\Microsoft\WindowsApps\CanonicalGroupLimited.Ubuntu16.04onWindows_79rhkp1fndgsc
if eclipse not able to select ubuntu16.4.exe, then write manually in path.
as shown in image.
Now just click on Apply and close. Open terminal (Ctrl+Alt+Shift+T) and select Ubuntu terminal.
Now, Navigate to source directory through terminal and compile you project. Enjoy...
Initially I followed espenalb's advice, but it didn't parse my build output correctly: double-clicking on lines didn't open the file, nor go to the line with the error.
I ended up changing the built-in CDT builder (instead of adding an external builder). I changed the build command to be the following (alex is my username):
bash.exe -c make 2>&1 | sed -e 's/\\/home\\/alex/C:\\\\Users\\\\alex/g' -e 's/\\//\\\\/g'
This way, the make output is converted from paths with "/home/alex" to the same path under "c:\users\alex". This fixes the parsing issue.
I also had an issue with eclipse replacing the build output with "Build not configured correctly" - I fixed it by disabling the "Scanner Configuration Builder" in the "Builders" submenu of the project properties (it's a C Makefile project). Also, need to remove targets "all" and "clean" from default build command.
Yet another variation. I managed to build with the external builder command set to
bash.exe -c "cd '${project_loc}' && cd directory_where_the_Makefile_is && make -j8"
Can you tell me how to install GTK on windows 10 or have a step by step guide, all the ones I've tried have not helped me.
Possibly if someone also explain how to compile from cmd or prepare an IDE (code: block maybe).
Any commands I mention should be run at the MINGW shell, found here: C:\msys64\msys2_shell.cmd
First update msys2 with pacman -Syu
Make sure you have installed GCC...Install the required toolchain for GCC with pacman -S mingw-w64-x86_64-toolchain. When using pacman, just keep typing enter if prompted to follow through with the installation and get back to the command prompt.
In order to set this step up with Code:Blocks, make sure you go to the Code:Blocks menu Settings->Compiler, and the menu Toolchain Executables. From there, put in the msys2 installation directory and where you installed MinGW's GCC compiler (for me this was putting C:\msys64\mingw64) under the compiler's installation directory option. Also edit the C Compiler path under the same menu to x86_64-w64-mingw32-gcc.exe.
Next, in order to install gtk+3.0, use the command pacman -S mingw-w64-x86_64-gtk3. Now the latest version of GTK+3.0 will have been installed, so it is time to set it up with Code:Blocks.
Open Code:Blocks and create a new C file. You may definitely write your code in Code:Blocks, but I do not suggest that you compile it from there. Two compile, go back to the MINGW shell. Type nano ~/.bashrc to edit it. You may scroll down using the arrow keys to the bottom of the file and add: PATH=$PATH:/c/msys64/mingw64/bin. Restart the MINGW shell and open it back up.
Finally, try running:
gcc source.c -o executable.exe `pkg-config --cflags --libs gtk+-3.0`.
If that command doesn't work, I would suggest using the i686 version of gcc installed in MINGW.
I hope this helps!
I am a newbie in cygwin. However, I have used mingw so far, but it is not supporting fork(), so I need to switch to cygwin. I have created a build.bat file in my mingw (programming language C):
gcc -o mask mask.c -pg -I/c/opencv/build/include -lopencv_core231 -lopencv_highgui231 -lopencv_imgproc231 -L. -L/c/opencv/build/x86/mingw/lib
Can anyone suggest me how I can run this .bat file at cygwin or refer me to a site.
How can I run mingw executable with cygwin? Any refernce will be appreciated.
Thanks for your help
Emon
I believe that cygwin can run cmd (DOS command interpreter), which can then run your batch file. The problem is that cmd won't be able to use the non-windows paths that you have in your batch script. Try to run: cmd /c myBuildFile.bat at a cygwin prompt, and you should see what I mean.
It is better to use cygwin-style tools for making a build script. You should have the make program on your path which will allow you to write simple and more complex build scripts.
Alternatively you could convert your .bat build script into a shell script, something like this:
#!/bin/sh
gcc -o mask mask.c -pg -I/c/opencv/build/include -lopencv_core231 -lopencv_highgui231 -lopencv_imgproc231 -L. -L/c/opencv/build/x86/mingw/lib
Name it anything, e.g. myBuildScript.sh, then make it executable with: chmod u+x myBuildScript.sh.
I'm enrolled in a masters computer science course. The course is using C and the instructor wants us to use Cygwin to compile programs if we are using windows.
I've downloaded and installed Cygwin and I've ensured that I've installed the GCC compiler.
But I don't know where to go from here. I need to compile a single source file that has a basic include.
#include <stdio.h>
Lets assume the file is on my desktop (it is not, but for the sake of argument). How do I navigate to the desktop from the bash shell? I assume once I've navigated to the correct location in bash, I simply execute:
gcc myProgram.c -o myProgram
Update: Following different instructions posted below, I was able to compile the program; I thank you for that. But when I execute the resulting binary I get the following. How can I compile or execute this program so I don't get the error? Again, thank you.
This application has failed to start because cygwin1.dll was not found. Re-installing the application may fix this problem.
when you start in cygwin, you are in your $HOME, like in unix generally, which maps to c:/cygwin/home/$YOURNAME by default. So you could put everything there.
You can also access the c: drive from cygwin through /cygdrive/c/ (e.g. /cygdrive/c/Documents anb Settings/yourname/Desktop).
Regarding your updated question about the missing cygwin1.dll.
From the Cygwin terminal check,
ls /usr/bin/cygwin1.dll
If it is not present (I doubt that), your installation is not properly done.
Then, check your path with,
echo $PATH
This will give : separated list of paths. It MUST contain /usr/bin. If you find that missing add it with,
export PATH=/usr/bin:$PATH
Finally,
I hope you are using Cygwin from the cygwin terminal (the little green+black icon installed with Cygwin), or MinTTY (if you installed that).
And, you have not moved the compiled EXE to a different machine which does not have Cygwin installed (if you do that, you will need to carry the cygwin1.dll to that machine -- keep it in the same folder as the compiled EXE).
Just to summarize, here are some commands that navigate to a directory and compile code using Cygwin and Windows Vista:
Start a Cygwin shell.
At the prompt, use cd to change to the appropriate directory:
$ cd /cygdrive/c/Users/nate/Desktop
Use ls to list the files in the directory:
$ ls
prog.c
Use the gcc command to compile a file in this directory:
$ gcc prog.c -o prog
If you don't see any errors, you should be able to run the resulting program:
$ ./prog
Update:
For the "Cygwin1.dll not found" error, I like Nik's answer. You might also check out this related post about cygwin1.dll not found, which suggests adding c:\cygwin\bin\ to your Windows PATH.
There are instructions on how to change the Windows PATH variable for Windows XP, and on Vista I think it's similar.
Go to Control Panel -> System
Select Advanced System Settings
Click on the Advanced tab
Click on Environment Variables
Under System Variables, find the Path entry and click Edit
Add c:\cygwin\bin to the list, making sure to separate it from any previous items with a semicolon
Look for (that is, cd to)
/cygdrive/c/
that will usually be your C:\
Also look at Using Cygwin, the Lifehacker introduction (June/2006) and, this biomed page at PhysioNet.
Regarding the cygwin1.dll not found error, a solution I have used for at least 8 years is to add the Cygwin bin directories to the end of my %PATH% in My Computer -> Properties -> Advanced -> Environment Variables. I add them to the end of the path so in my normal work, they are searched last, minimizing the possibility of conflicts (in fact, I have had no problems with conflicts in all this time).
When you invoke the Cygwin Bash Shell, those directories get prepended to the %PATH% so everything works as intended in that environment as well.
When not running in Cygwin shell, my %PATH% is:
Path=c:\opt\perl\bin; \
...
C:\opt\cygwin\bin; \
C:\opt\cygwin\usr\bin; \
C:\opt\cygwin\usr\local\bin;
This way, for example, ActiveState Perl's perl is found first when I am not in a Cygwin Shell, but the Cygwin perl is found when I am working in the Cygwin Shell.
If you are not comfortable with bash, you can continue to work in a standard windows command (i.e. DOS) shell.
For this to work you must add C:\cygwin\bin (or your local alternative) to the Windows PATH variable.
With this done, you may:
1) Open a command (DOS) shell
2) Change the directory to the location of your code (c:, then cd path\to\file)
3) gcc myProgram.c -o myProgram
As mentioned in nik's response, the "Using Cygwin" documentation is a great place to learn more.
If you just do gcc program.c -o program -mno-cygwin it will compile just fine and you won't need to add cygwin1.dll to your path and you can just go ahead and distribute your executable to a computer which doesn't have cygwin installed and it will still run. Hope this helps
Windows path C:\src under cygwin becomes /cygdrive/c/src
Compiling your C program using Cygwin
We will be using the gcc compiler on Cygwin to compile programs.
1) Launch Cygwin
2) Change to the directory you created for this class by typing
cd c:/windows/desktop
3) Compile the program by typing
gcc myProgram.c -o myProgram
the command gcc invokes the gcc compiler to compile your C program.
You might be better off editing a file inside of cygwin shell. Normally it has default user directory when you start it up. You can edit a file from the shell doing something like "vi somefile.c" or "emacs somefile.c". That's assuming vi or emacs are installed in cygwin.
If you want to file on your desktop, you'll have to go to a path similar (on XP) to "/cygwindrive/c/Documents\ and\ Settings/Frank/Desktop" (If memory serves correctly). Just cd to that path, and run your command on the file.
Cygwin is very cool! You can compile programs from other systems (Linux, for example), and they will work. I'm talking communications programs, or web servers, even.
Here is one trick. If you are looking at your file in the Windows File Explorer, you can type "cd " in your bash windows, then drag from explorer's address bar into the cygwin window, and the full path will be copied! This works in the Windows command shell as well, by the way.
Also: While "cd /cygdrive/c" is the formal path, it will also accept "cd c:" as a shortcut. You may need to do this before you drag in the rest of the path.
The stdio.h file should be found automatically, as it would be on a conventional system.
This file (cygwin1.dll) is cygwin dependency similar to qt dependency.you must copy this file and similar files that appear in such messages error, from "cygwin/bin" to folder of the your program .Also this is necessary to run in another computer that have NOT cygwin!