I am new to WPF in general and want to add some animation to my interface.
I have a label and an image. The label will fly in from the right side of the window, the image from the left. They'll meet in the center. The image will rotate while its flying in, while the text will pretty much just move across the screen.
So my question is. For this kind of animation do you get a path object where you can draw a line at design time and have elements move across this line at a certain speed?
In classic windows forms I would have approached the issue using a timer and then adjust the left property of the label at each tick. Surely WPF is more sophisticated than this though.
So can anyone tell me a good approach?
First: You need ExpressionBlend to create animation in WPF.
WPF is more sophisticated
Of course no, read about animation in WPF, Personally, I prefer video learning for it.
you can find here some clips, I recommend this series from Total training.
Related
Other questions on SE address how to speed up nested UI control resizing, but- what if there aren't any controls?
As you drag the edge of a WPF window, even a main window with no content, black bars flicker briefly during the drag. This produces a crummy feel- one that I don't want to inflict on customers:
It does get slower and heavier with a full UI on top of it as well. This doesn't even get into how ugly it looks when resizing using the top or left edges. Windows Forms- even with the heaviest UI I've built- never looks this bad right off the bat.
What can be done to make WPF window resizing performance comparable to win forms?
(I have Windows 7 x64 and a triple monitor system on an AT Radeon HD 7470.)
You could update your graphic card and try it out again but that wont change anything. The reason is pretty simple. We all get to see this sometimes based how fast/slow our computer is. Sometimes it runs smooth because we do not have many visuals to draw. The reason is no proper background color is found in graphic card at that moment in redrawing process. Your drivers are fine, and its not just because you use Wpf. Other techniques use the same mechanism behind redrawing.
The first thing WPF will do is clear out the dirty region that is going to redraw. The purpose of dirty regions is to reduce the amount of pixels sent to the output merger stage of the GPU pipeline. Here is where we see the black color. Window itself at that point has no background color or its background color is set to transparent and so to us the GPU draws the black background. Things run async in wpf which is good so.
To fix this you could set a fix color such as "White" to the Window. Then the WPF system will clean out the dirty region but fill it automatically with white color instead of black. This usually helps.
Match the window color or the color of top most layer. Dont let GPU use black and you should do fine. Btw Wpf is faster than WinForm so dont worry.
The look is crummy indeed, especially when using the top or left border.
Which exact problem your screen shot is showing depends on how long your app is taking to render as well as a couple of background related settings that you might be able to tweak to get better resize. Plus part of the ugly resize is specific to Aero.
While I can't address the specific crazy slowness of WPF redraw, I can at least give some insight on why you see black, where that is coming from, and whether you can change to a less annoying fill-in color.
It turns out there are multiple different sources of the black and the bad resize behavior from different Windows versions that combine together. Please see this Q&A which explains what is going on and provides advice for what to do (again, not specific to making WPF faster but just seeing what you can do given the speed you have):
How to smooth ugly jitter/flicker/jumping when resizing windows, especially dragging left/top border (Win 7-10; bg, bitblt and DWM)?
I am trying to remove the border of my WPF window in the design view/tab in Visual Studio. Please don't mistake this as a request to create a border less WPF window. I did that and it is working fine. What bothers me is that even if you have set WindowStyle = None, ResizeMode = NoResize, the design view/tab still shows a border around your window in the preview.
Is there a way to remove said border and have a 1:1 preview of the border less window as in Windows Forms?
Every question I have found in regards to this only asks how to remove the border of the actual application. I would like to remove it in the preview.
Any help would be very much appreciated :)
here is a screenshot of my problem:
This cannot be done as this is just how Visual Studio renders a window in design view (I think the frame is probably there so that you can distinguish when you are editing a Window rather than a UserControl).
Rather than try and find a solution to this I would ask myself if this is something I need to be spending time figuring out - after all you say that your program works correctly when being run. I think your time will be better spent writing code for your program rather than trying to play with the design time environment.
Update: In response to you comment, consider that the window frame will be different on every users machine depending on their operating system version (XP vs. Win7) or the theme the user has installed.
My computer has XP installed so the side borders are a lot thinner than those shown in design time so any content will be smaller (but only my a few pixels - 4 in my case; does your user interface design really depend on 4 pixels?).
When using a technology such as WPF you should not be designing your UI to fit to exact pixel sizes; you should be designing with min / max values or using layout containers that adjust to the size of the window as set by the user. Any regions in your UI (E.G. sidebar and main content) should be expressed as a ratio or percentage of one another; instead of saying "The side bar is 150 pixels wide and the main content area is 350 pixels wide" you should be saying "The side bar takes up a third of the window width and the main content takes two thirds".
Although the question is very old and have already been answered (kind of), I just realized: if you set WindowStyle="None", your undesired border is gone.
Given a WPF Application running full screen, a fair amount of controls some of which will animate from off screen to center. I was wondering if there are any special ways to save on the amount of time required to optimize an application for different screen resolutions?
For example, using Blend I've setup some text, which is originally off screen to scroll into view. Now in design mode the start positions are static. If resolution changes the start positions will obviously not be correct.
So I guess to correct this, during app startup. I need to
Check resolution
Move the text box to the desired start location
Adjust the storyboard as required, so the frames all have correct co-ordinates depending on the res of the screen.
I don't mind doing all of this, but if there is an easier way please share!
Thanks
In WPF layout of controls should be made in such way, that when size of window or content changes, controls automaticaly resize/reposition themselves to reflect this change.
This is highly affected how your layout is made, especialy by using specific panels, that do layout of their child elements.
This is also made obvious by using device-independent units for sizes, margins and sometimes positions of controls. And also allows different kind of zooming and scaling of whole UI without any need to redesign the whole thing.
If you are trying to position your controls absolutely, either by using Canvas panel or margins, your are doing it totaly wrong.
In WPF, scene is measured in abstract units, not pixels, and controls are freely scaled. There should be no problems to center something, or what?
I am making a flash card application. It shows the question and then a textbox for user input, all wrapped in a border or rectangle. So what I want is an animation that "flips" the rectangle or border upside-down and then their is text on the "back". Also, I want my application to APPEAR transition from one card to another by "flying off" the screen then "another" card comes in to replace the other one in the opposite direction. But actually I'm want just a little animation of the border or rectangle moving off the screen then coming back in, but in the opposite direction. Some help would be appreciated, like what kind of animation can accomplish this and maybe a small code sample to demonstrate. I am not asking you write all this, I think that would be a little rude (unless you really want to).
Have you had a look at the Silverlight FX stuff? There might be some animations in there that are what you are looking for. There are also samples provided.
http://projects.nikhilk.net/SilverlightFX
Michael
I have an app with a bunch of controls in it and I want to place a set of cross hairs on top of it. My first attack used a PictureBox and ran into this problem. The solution that fellow proposes, seems a bit... verbose for what I need.
Is there a simple way draw on top of my form? Note that I don't even need the drawing to be part of a control as it doesn't need to do anything but just be there.
This eventually worked. I had to play some games though because most of the controls I wanted to draw on were not where it expected them to be.
Also, it ran into issues when controls were moved; it failed to redraw and stuff moved with the underlying control. This was fixed by forcing invalidation from the move event for anything that might move.
Does a PictureBox with a transparent image have the same problem as a Panel with BackColor set to Transparent? I'm thinking you could have a PictureBox with the crosshair image in it and move that around, instead of drawing it yourself...