I am just getting started with Cakephp shell and running into issues.
My cake core library is under path d:/libs/cake
My app is setup under d:/servers/htdocs/myapp
I wrote a test shell under d:/servers/htdocs/myapp/vendor/shells
class ReportShell extends Shell {
var $uses = array('Appt');
function main() {
echo $this->Appt->find('first');
}
}
When I try to run this code from d:/servers/htdocs/myapp , It gives me an error
Warning: include_once(d:/servers/htdocs/myapp/config/database.php): failed to open stream: No such file or directory in d:/libs/cake\libs\mode
l\connection_manager.php on line 23
Warning: include_once(): Failed opening 'd:/servers/htdocs/myapp/config/database.php' for inclusion (include_path='.;D:\work\xampp\php\PEAR') in d:/libs/cake\libs\model\connection_manager.php on line 23
Fatal error: ConnectionManager::getDataSource - Non-existent data source default in d:/libs/cake\libs\model\connection_manager.php on line 102
Reason is that it is trying to find database.php under 'd:/servers/htdocs/myapp/config/' and the correct path is 'd:/servers/htdocs/myapp/app/config/database.php'
What am I doing wrong here?
thanks
My app is setup under d:/servers/htdocs/myapp
No, the application directory (holding the config folder) is D:\servers\htdocs\myapp\app\.
Reason is that it is trying to find database.php under 'd:/servers/htdocs/myapp/config/' and the correct path is 'd:/servers/htdocs/myapp/app/config/database.php'
You are in the wrong directory, therefore it can't find your database config.
I wrote a test shell under d:/servers/htdocs/myapp/vendor/shells
Move your shell out of the global vendors folder at D:\servers\htdocs\myapp\vendors\shells to the application's vendors folder at D:\servers\htdocs\myapp\app\vendors\shells instead and try again.
(Note: I'm not actually sure where the global vendors folder should be when you have a setup where the cake and application directories are split from each other, but you definitely have to be in your application directory when running commands and not the myapp directory you're using.)
If you add D:\libs\cake\console\ to your PATH environment variable (remembering to close all cmd.exe processes afterwards) then you will simply be able to execute the following:
D:\servers\htdocs\myapp\app> cake report (from within the application directory)
Otherwise you will need to type the full relative or absolute path to the cake console executable and/or provide CakePHP with the absolute path to the application directory (if you are not in it):
D:\servers\htdocs\myapp\app> ..\..\..\..\libs\cake\console\cake report
D:\servers\htdocs\myapp\app> \libs\cake\console\cake report
D:\libs\cake\console> cake -app D:\servers\htdocs\myapp\app report
D:\> libs\cake\console\cake -app D:\servers\htdocs\myapp\app report
etc...
Hopefully you can see why just adding the correct folder to your PATH makes things a lot easier. :)
Try to run it from within the /app directory or with the -app parameter specified:
cake -app d:/servers/htdocs/myapp/app report
Thanks. Here was the issue
My shell script was under /myapp/vendor/shells which was wrong. It should have been under /myapp/app/vendor/shells. After I moved the file, it worked. Thank you
You should always be in your APP path to execute the cake console.
Your Shell File Should be in ..app/Console/Command/
If your file name is TestShell.php type command app> cake test
Related
I have Python 3.10.7 with the follwing packgaes installed using pip install in command line:
behave 1.2.6
selenium 4.4.3
These have also been added to the packagelist of the project using the project config in pycharm
Also behave is in the systme path as well along with python.
I am trying to use the behave command but I am getting the following error:
behave : The term 'behave' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ behave features\myfeaturefile.feature
Following is my project directory:
Following is my project in pycharm:
I need help in fixing this problem as I am new to this tool. Thanks
First check if you have behave and python in the path variables.
Check if you can execute the below command
C:\demo>behave -h
If this does not return a list of help commands associated with behave, this means that behave is not in the path variables
Alternatively, you can check it via cmd using the "PATH" command. This will show you all the entries in the system path
C:\demo>PATH
PATH=C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\wbin;C:\Program Files\AdoptOpenJDK\jdk-11.0.11.9-hotspot\bin...
If behave or python are not in the path variables, you can set them using
set PATH=%PATH%;c:\PATH_TO_BEHAVE
NOTE: Setting path using cmd is only valid till the time the cmd window is open. Once you close it, the path variable will be rest to original values.
Behave, along with a few other .exe files is sitting in the:
C:\Users\chauhany\AppData\Roaming\Python\Python310\Scripts
As per your instructions #Manish Agarwal, I added the C:\Users\chauhany\AppData\Roaming\Python to the PATH from the command line and re-started the machine. But it didn't help. I then moved the behave.exe from the above location to my python 3.10 directory which is sitting in C:\Program Files\Python310 and python is in the system path, and restarted my machine again.
I then deleted and recreated my project with the new feature file (same directory structure).
If I now run the same command, that is, features\myfeaturefile.feature from
C:\Users\chauhany\PycharmProjects\martechBehaveProject>
I get a FileNotFound error
So I went to the folder where the file is actually sitting that is:
C:\Users\chauhany\PycharmProjects\martechBehaveProject\features\steps> and then re-ran the command and it worked.
I was under the impression that if you have just one feature file you don't have to specify the actual feature file and it can be run from anywhere in your project i.e., from any location which certainly is not correct.
I'm working with selenium. The script is in :
C:\Users\User\Desktop\Data Analytics Arg\Proyectos\datademia\Py_install\py_ejemplo.py . Venv is activated and chromedriver.exe is in C:\Users\User\Desktop\Data Analytics Arg\Proyectos\datademia\Py_install\chromedriver.exe
The script runs perfectly. Then I created an only .exe-file via terminal :
pyinstaller --add-data "chromedriver.exe;." --windowed --onefile py_ejemplo.py
Folders are created correctly (build and dist). The .exe file (py_ejemplo.exe) was created, but when I try to run it, I get this message:
I've been looking and still can't solve it... I've tried these solutions :
filenotfound
but didn't work for me...Could someone help me? I donĀ“t know what's wrong...
Thanks in advance
I got the same problem but I was working with Firefox and geckodriver.
In my case, I copied the selenium folder from the virtual environment to the dist folder and it worked.
There are a few things you should ensure when packing a script with pyinstaller build with selenium web driver.
It may require to add driver executable when building. I.e. chromedriver.exe
It may also require to add some package files related to selenium such as getattributes.js file when building. It was required at my project.
pyinstaller will extract those files to temp folder in AppData for windows users. So in your code, your relative paths may require to be resolved with a sample function as below (if you are running your code in vs code or you are running through pyinstaller executable the paths should be resolved by function).
For item 1 and 2, you can use --add-binary and --add-data features of pyinstaller for each of them. It is also possible to do this in *.spec file with add-files list, following your first running of pyinstaller (see this explanation) I preferred command-line option as below.
pyinstaller ./app.py --onefile --noconsole --add-binary "./driver/chromedriver.exe;./driver" --add-data "C:\Users\YOUR_USER_NAME\.conda\pkgs\selenium-3.141.0-py38h2bbff1b_1000\Lib\site-packages\selenium\webdriver\remote;selenium\webdriver\remote"
For item 3, to resolve relative paths in your source code, you can use below function in related places (for example when accessing chromedriver.exe)
def resource_path(relative_path):
try:
base_path = sys._MEIPASS
except Exception:
base_path = os.path.dirname(__file__)
return os.path.join(base_path, relative_path)
Use above function once you need to access packaged executables and files in your source code. In below example, my chromedriver is inside driver folder in my workspace. But when it is accessed through pyinstaller executable, it will be extracted to temp folder in AppData, yet function will access it through sys._MEIPASS variable set by pyinstaller.
driver = webdriver.Chrome(executable_path = resource_path('./driver/chromedriver.exe'))
Hope it works.
I am using custom Nagios plugins for the first time and am running into this error when I create a service for the plugin.
(No output on stdout) stderr: execvp(/usr/local/nagios/libexec/check_load.py, ...) failed. errno is 2: No such file or directory
The plugin works when I run it on the command line, however does not work when it runs within Nagios.
I followed these steps to get the plugin into Nagios
https://assets.nagios.com/downloads/nagiosxi/docs/Managing-Plugins-in-Nagios-XI.pdf
Here is what it looks like in the Nagios UI
The plugin is in the correct path: /usr/local/nagios/libexec and the resource.cfg file has the same path within it.
I tried two separate plugins, both which work on the command line, and the result is the same error.
The error indicates the file location is incorrect, however the plugin is in the specified directory and runs with no errors within that directory.
I am totally stumped and appreciate any help.
For anyone reading this, I solved the problem.
The first time I added the plugin, I forgot to add the python extension. When I updated the already created plugin, Nagios still threw the error.
Once I completely deleted the plugin and re-created it the 'file not found', error went away.
I faced a similar issue when I was trying to add a custom plugin ( I had custom plugins in ruby and python ).
The issue was the missing shebang line at the start of the script (which determines the script's ability to be executed like a standalone executable).
For example, if you have a python plugin custom-plugin.py then make sure this script has shebang at the start of script #!/usr/bin/env python3. Also if you have other scripts (ruby, bash etc.) make sure to add the appropriate path at the start of your scripts.
Also, check the path for plugins Nagios version. For my setup path was /usr/local/nagios/libexec/ and make sure your custom plugin is executable and has correct ownership permissions.
Sample custom template I used :
define command {
command_name check_switch_health
command_line /usr/local/nagios/libexec/check_snmp.rb --host $HOSTADDRESS$ --model "$ARG1$" --community "$ARG2$"
}
The above workaround worked for me.
To run tests in Jenkins I use the next batch command:
"C:\Program Files (x86)\NUnit 2.6.4\bin\nunit-console.exe" /result:TestResult.xml "C:\Users\Denis\Documents\Visual Studio 2013\Projects\MyProject\App.nunit"
Here how it looks in Jenkis:
The problem is: it doesn't generate TestResult.xml file!
When I run the same command as a .bat file from my desctop it creates the TestResult.xml file.
Any ideas what is wrong with Jenkins?
P.S. I searched for created file in all possible folders and even via "search"
I came up with thought that the file is generated and removed then or something like this.
The thing is that I don't see this file indeed but Jenkins generated report based on this file! So I think maybe after generating report the file was removed automatically.
I had faced the same issue and I found the test results xml file under my user directory in Win 7.
Note : I think it's some problem with nunit that it doesn't export the file to the location of which we provide the path.
I've installed the latest version of CakePHP on a Ubuntu 10.10 machine. I was able to run through a beginner tutorial just fine so I think my configuration is close to being correct. I can't get cake bake to completely work though. Below is my session. Things that look like anomolies are in bold. I think I must have one or more small errors in my configuration that are manifesting when running the bake shell. Thanks!
ubuntu#myserver.com:~$ cd /var/www/app
ubuntu#myserver.com:/var/www/app$ ../cake/console/cake bake -app /var/www/app
Failed loading /usr/lib/php5/20090626.so: /usr/lib/php5/20090626.so: cannot open shared object
file: No such file or directory
Welcome to CakePHP v1.3.2 Console
App : app
Path: /var/www/app
Interactive Bake Shell
[D]atabase Configuration
[M]odel
[V]iew
[C]ontroller
[P]roject
[F]ixture
[T]est case
[Q]uit
What would you like to Bake? (D/M/V/C/P/F/T/Q)
P
What is the full path for this app including the app directory name?
Example:/var/www/app/myapp
[/var/www/app/myapp] > /var/www/app
Bake Project
Skel Directory: /usr/share/php/cake/console/templates/skel
Will be copied to: /var/www/app
Look okay? (y/n/q)
[y] > y
Do you want verbose output? (y/n)
[n] > y
Created: app in /var/www/app
/usr/share/php/cake/console/templates/skel/app_controller.php copied to
/var/www/app/app_controller.php
/usr/share/php/cake/console/templates/skel/app_model.php copied to
/var/www/app/app_model.php
/usr/share/php/cake/console/templates/skel/index.php copied to /var/www/app/index.php
/usr/share/php/cake/console/templates/skel/.htaccess copied to /var/www/app/.htaccess
/usr/share/php/cake/console/templates/skel/app_helper.php copied to /var/www/app/app_helper.php
Creating file /var/www/app/views/pages/home.ctp
File /var/www/app/views/pages/home.ctp exists, overwrite? (y/n/q)
[n] > y
Wrote /var/www/app/views/pages/home.ctp
Welcome page created
Random hash key created for 'Security.salt'
Random seed created for 'Security.cipherSeed'
Unable to set CAKE_CORE_INCLUDE_PATH, you should change it in /var/www/app/webroot/index.php
Could not set permissions on /var/www/app//tmp
chmod -R 0777 /var/www/app//tmp
Interactive Bake Shell
[D]atabase Configuration
[M]odel
[V]iew
[C]ontroller
[P]roject
[F]ixture
[T]est case
[Q]uit
What would you like to Bake? (D/M/V/C/P/F/T/Q)
q
ubuntu#myserver.com:/var/www/app$
Mark Murphy,
1.
Failed loading /usr/lib/php5/20090626.so: /usr/lib/php5/20090626.so: cannot open shared object
*.so files are shared libraries. I would try to tackle it be (re-) installing the PHP CLI.
2.
Could not set permissions on /var/www/app//tmp
How could the slash creep in twice? Such a folder should not exist.
Edit0:
It is a bit strange, as CakePHP should work right out of the box, but maybe you really should take a look at the specified variable in app/webroot/index.php and see if you can change the CAKE_CORE_INCLUDE_PATH so that the superfluous slash vanishes.
Edit1:
For general deployment there is nothing better than this afaik.
Edit2:
cake bake help returns:
-app Absolute/Relative path to your app folder.
Hence you should call either:
cake bake app /var/www/<your_project_name>/ <---- note the trailing slash
or
when in /var/www/ call cake bake app <just_your_project_name>
Edit3:
In a nutshell: You could download the CakePHP tar.gz and unzip it in your /var/www/, then rename the folder (having some weird cakePHP-1234... name) into the name of your application, e.g. missioncontrol. Then in your browser: http://localhost/missioncontrol , proceed as instructed.
This is a very quick method to get going, but you can develop other methods according to your build process.
After you have developed your app and intend to deploy it on a host different than your local machine, use the link provided under edit1.