I am passing a list of arguments while running a batch file and need the value of a particular argument -logdir to set some dir path in my batch file. How can I first check if the -logdir is passed as argument and if it is passed get its value and set it in a variable.
I am running it like:
test.bat -env test1 -logdir C:\Users\...\log -userhome ... -log ...
and many more arguments. These arguments can be passed in different order.
I am able to fetch the list of arguments passed using below.
set argCount=0
for %%x in (%*) do set /A argCount+=1
echo Number of processed arguments: %argCount%
set /a count=0
for /l %%x in (1, 1, %argCount%) do (
set /a count=!count!+1
call set "var=%%!count!"
echo var= %!var!
)
But I am facing issues comparing this args with the value. I tried using if as below :
if -> if "!_var!" equ "-logdir" set /a logdir="%%!count!"
But getting error as syntax not correct.
#echo off
setlocal
call :parseArgs %*
if errorlevel 1 exit /b 1
echo env %env%
echo log %log%
echo logdir %logdir%
echo userhome %userhome%
exit /b
:parseArgs
for %%A in (%*) do (
if defined arg (
call set "%%arg%%=%%~1"
set "arg="
) else (
for %%B in (
env
log
logdir
userhome
) do if "%%~A" == "-%%~B" set "arg=%%~B"
if not defined arg (
>&2 echo %%A is an invalid argument.
exit /b 1
)
)
shift
)
exit /b
After the for %%B in ( line is where the valid keywords
are located. If an argument does not define arg, then it
exits the :parseArgs label in which you can check
errorlevel to exit the script.
Does any order with arguments.
E.g.
myscript -env current -log text.log
which would have variable %env% with value current etc.
If you want default values in case i.e. -log is not passed, then
just e.g. set "log=%~n0.log" before the call :parseArgs line.
You claim there can be "many more arguments". The %x syntax can only use the first nine parameters, so with the available %1 to %9 you can only process four pairs, which might be too few. Gladly, the parameters 10... are not lost (although not directly accessible). You can shift the parameter list to the left.
As the parameter pairs "can be passed in different order", it's best to just assign the even parameters (values) to variables named like the odd parameters (variables). I addes some REM's to the code to explain it:
#echo off & setlocal
:loop
if "%~2" == "" goto :done & REM if no other pair of parameters then done
set "%~1=%~2" & REM set variable
shift & REM remove first...
shift & REM ... two params
goto :loop & REM and repeat
:done
REM show parameters:
set -
Note: no syntax check. Parameters are expected to be repeatedly -param and value
To pass parameters with spaces (or other delimiters), quote them like
test.bat -env test1 -logdir "C:\path with spaces\log"
I'm trying to set up a batch menu that allows for multiple selection at once then runs all the functions. Sequence that functions are not relevant just the fact that the functions will be run with out, outside errors. Here is the code that I have so far.
#Echo off
Echo Please Enter the corrasponding numbers separated by a space or colon (,)
Echo for the Options that you would like to run e.g. 1 4,3 2
Echo Option #1
Echo Option #2
Echo Option #3
Echo Option #4
Echo.
SET /P Selection=Please Select Restore Options?
echo You chose: %Selection%
setlocal ENABLEDELAYEDEXPANSION
Set /a index = 0
FOR %%A IN (%Selection%) DO (
SET Array[!index!] = %%A
SET /a index += 1
)
for /F "tokens=2 delims==" %%s in ('set Array[') DO (
set string=%%s
set string=%string: =%
echo %string%
Call :Opt%string%
)
pause
goto :EOF
:Opt1
ECHO Option 1's code
GOTO :EOF
:Opt2
ECHO Option 2's code
GOTO :EOF
:Opt3
ECHO Option 3's code
GOTO :EOF
:Opt4
ECHO Option 4's code
GOTO :EOF
The code I have works to the point where trying to call the Array veriable and attach it to a Call e.g. Call :Opt%%s
The probelm I have is that the array variable keeps coming out with a space proceeding the selected variable. So I have tried combating this with set string=%string:=% but I keep getting an error.
Error :
either echo is off and only opt is getting called with out the selected variable.
Help with this would be amazing, Thanks in advance.
The start of the problems is
SET Array[!index!] = %%A
------------------^-^---- = aditional spaces
This aditional spaces are used, so you end with a variable with an aditional space in its name and an aditional space in its value. So, better use
SET "Array[!index!]=%%A"
The reason for the echo error is you forget to use delayed expansion in the for %%s loop. You change the %string% variable inside the loop and try to use the changed value inside the same loop.
for /F "tokens=2 delims==" %%s in ('set Array[') DO (
set "string=%%s"
set "string=!string: =!"
echo !string!
Call :Opt!string!
)
But the corrections indicated in the original set make it unnecessary to replace the spaces.
MC ND solved most of the problems with your code.
One trivial issue - the punctuation is a comma, not a colon ;-)
But a more serious issue, what if the user entered 3 choices, and there already was a variable named Array[4]? It would run that extra value that hadn't been entered by the user. It would even attempt to run a value stored in Array[anythingGoes.
You've got the number of values stored in "index", so why not use it? A more common and simpler way to iterate the array is to use a FOR /L loop. This also preserves the original order. Your way would change the order once you get 10 or more entries. (I know you say order doesn't matter, but why change the order if you don't have to?)
setlocal enableDelayedExpansion
for /l %%N in (1 1 %index%) do (
echo !Array[%%N]!
call :Opt!Array[%%N]!
)
But I don't see a reason to mess with an array at all. Your loop that parses the user input could simply call the functions directly. Now you don't even need delayed expansion.
for %%A in (%Selection%) do (
echo %%A
call :Opt%%A
)
In my batch file on Windows XP, I want to use %* to expand to all parameters except the first.Test file (foo.bat):
#echo off
echo %*
shift
echo %*
Call:
C:\> foo a b c d e f
Actual result:
a b c d e f
a b c d e f
Desired result:
a b c d e f
b c d e f
How can I achieve the desired result? Thanks!!
Wouldn't it be wonderful if CMD.EXE worked that way! Unfortunately there is not a good syntax that will do what you want. The best you can do is parse the command line yourself and build a new argument list.
Something like this can work.
#echo off
setlocal
echo %*
shift
set "args="
:parse
if "%~1" neq "" (
set args=%args% %1
shift
goto :parse
)
if defined args set args=%args:~1%
echo(%args%
But the above has problems if an argument contains special characters like ^, &, >, <, | that were escaped instead of quoted.
Argument handling is one of many weak aspects of Windows batch programming. For just about every solution, there exists an exception that causes problems.
That´s easy:
setlocal ENABLEDELAYEDEXPANSION
set "_args=%*"
set "_args=!_args:*%1 =!"
echo/%_args%
endlocal
Same thing with comments:
:: Enable use of ! operator for variables (! works as % after % has been processed)
setlocal ENABLEDELAYEDEXPANSION
set "_args=%*"
:: Remove %1 from %*
set "_args=!_args:*%1 =!"
:: The %_args% must be used here, before 'endlocal', as it is a local variable
echo/%_args%
endlocal
Example:
lets say %* is "1 2 3 4":
setlocal ENABLEDELAYEDEXPANSION
set "_args=%*" --> _args=1 2 3 4
set "_args=!_args:*%1 =!" --> _args=2 3 4
echo/%_args%
endlocal
Remarks:
Does not work if any argument contains the ! or & char
Any extra spaces in between arguments will NOT be removed
%_args% must be used before endlocal, because it is a local variable
If no arguments entered, %_args% returns * =
Does not shift if only 1 argument entered
Don't think there's a simple way to do so. You could try playing with the following workaround instead:
#ECHO OFF
>tmp ECHO(%*
SET /P t=<tmp
SETLOCAL EnableDelayedExpansion
IF DEFINED t SET "t=!t:%1 =!"
ECHO(!t!
Example:
test.bat 1 2 3=4
Output:
2 3=4
Another easy way of doing this is:
set "_args=%*"
set "_args=%_args:* =%"
echo/%_args%
Remarks:
Does not work if first argument (%1) is 'quoted' or "double quoted"
Does not work if any argument contains the & char
Any extra spaces in between arguments will NOT be removed
I had to do this recently and came up with this:
setlocal EnableDelayedExpansion
rem Number of arguments to skip
set skip=1
for %%a in (%*) do (
if not !position! lss !skip! (
echo Argument: '%%a'
) else (
set /a "position=!position!+1"
)
)
endlocal
It uses loop to skip over N first arguments. Can be used to execute some command per argument or build new argument list:
setlocal EnableDelayedExpansion
rem Number of arguments to skip
set skip=1
for %%a in (%*) do (
if not !position! lss !skip! (
set args=!args! %%a
) else (
set /a "position=!position!+1"
)
)
echo %args%
endlocal
Please note that the code above will add leading space to the new arguments. It can be removed like this:
How to remove trailing and leading whitespace for user-provided input in a batch file?
Yet another obnoxious shortcoming of DOS/Windows batch programming...
Not sure if this is actually better than some of the other answers here but thought I'd share something that seems to be working for me. This solution uses FOR loops rather than goto, and is contained in a reusable batch script.
Separate batch script, "shiftn.bat":
#echo off
setlocal EnableDelayedExpansion
set SHIFTN=%1
FOR %%i IN (%*) DO IF !SHIFTN! GEQ 0 ( set /a SHIFTN=!SHIFTN! - 1 ) ELSE ( set SHIFTEDARGS=!SHIFTEDARGS! %%i )
IF "%SHIFTEDARGS%" NEQ "" echo %SHIFTEDARGS:~1%
How to use shiftn.bat in another batch script; in this example getting all arguments following the first (skipped) arg:
FOR /f "usebackq delims=" %%i IN (`call shiftn.bat 1 %*`) DO set SHIFTEDARGS=%%i
Perhaps someone else can make use of some aspects of this solution (or offer suggestions for improvement).
Resume of all and fix all problems:
set Args=%1
:Parse
shift
set First=%1
if not defined First goto :EndParse
set Args=%Args% %First%
goto :Parse
:EndParse
Unsupport spaces between arguments: 1 2 3 4 will be 1 2 3 4
I need to pass an ID and a password to a batch file at the time of running rather than hardcoding them into the file.
Here's what the command line looks like:
test.cmd admin P#55w0rd > test-log.txt
Another useful tip is to use %* to mean "all". For example:
echo off
set arg1=%1
set arg2=%2
shift
shift
fake-command /u %arg1% /p %arg2% %*
When you run:
test-command admin password foo bar
The above batch file will run:
fake-command /u admin /p password admin password foo bar
I may have the syntax slightly wrong, but this is the general idea.
Here's how I did it:
#fake-command /u %1 /p %2
Here's what the command looks like:
test.cmd admin P#55w0rd > test-log.txt
The %1 applies to the first parameter the %2 (and here's the tricky part) applies to the second. You can have up to 9 parameters passed in this way.
If you want to intelligently handle missing parameters you can do something like:
IF %1.==. GOTO No1
IF %2.==. GOTO No2
... do stuff...
GOTO End1
:No1
ECHO No param 1
GOTO End1
:No2
ECHO No param 2
GOTO End1
:End1
Accessing batch parameters can be simple with %1, %2, ... %9 or also %*,
but only if the content is simple.
There is no simple way for complex contents like "&"^&, as it's not possible to access %1 without producing an error.
set var=%1
set "var=%1"
set var=%~1
set "var=%~1"
The lines expand to
set var="&"&
set "var="&"&"
set var="&"&
set "var="&"&"
And each line fails, as one of the & is outside of the quotes.
It can be solved with reading from a temporary file a remarked version of the parameter.
#echo off
SETLOCAL DisableDelayedExpansion
SETLOCAL
for %%a in (1) do (
set "prompt="
echo on
for %%b in (1) do rem * #%1#
#echo off
) > param.txt
ENDLOCAL
for /F "delims=" %%L in (param.txt) do (
set "param1=%%L"
)
SETLOCAL EnableDelayedExpansion
set "param1=!param1:*#=!"
set "param1=!param1:~0,-2!"
echo %%1 is '!param1!'
The trick is to enable echo on and expand the %1 after a rem statement (works also with %2 .. %*).
So even "&"& could be echoed without producing an error, as it is remarked.
But to be able to redirect the output of the echo on, you need the two for-loops.
The extra characters * # are used to be safe against contents like /? (would show the help for REM).
Or a caret ^ at the line end could work as a multiline character, even in after a rem.
Then reading the rem parameter output from the file, but carefully.
The FOR /F should work with delayed expansion off, else contents with "!" would be destroyed.
After removing the extra characters in param1, you got it.
And to use param1 in a safe way, enable the delayed expansion.
Yep, and just don't forget to use variables like %%1 when using if and for and the gang.
If you forget the double %, then you will be substituting in (possibly null) command line arguments and you will receive some pretty confusing error messages.
A friend was asking me about this subject recently, so I thought I'd post how I handle command-line arguments in batch files.
This technique has a bit of overhead as you'll see, but it makes my batch files very easy to understand and quick to implement. As well as supporting the following structures:
>template.bat [-f] [--flag] [--namedvalue value] arg1 [arg2][arg3][...]
The jist of it is having the :init, :parse, and :main functions.
Example usage
>template.bat /?
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
USAGE:
test.bat [flags] "required argument" "optional argument"
/?, --help shows this help
/v, --version shows the version
/e, --verbose shows detailed output
-f, --flag value specifies a named parameter value
>template.bat <- throws missing argument error
(same as /?, plus..)
**** ****
**** MISSING "REQUIRED ARGUMENT" ****
**** ****
>template.bat -v
1.23
>template.bat --version
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
>template.bat -e arg1
**** DEBUG IS ON
UnNamedArgument: "arg1"
UnNamedOptionalArg: not provided
NamedFlag: not provided
>template.bat --flag "my flag" arg1 arg2
UnNamedArgument: "arg1"
UnNamedOptionalArg: "arg2"
NamedFlag: "my flag"
>template.bat --verbose "argument #1" --flag "my flag" second
**** DEBUG IS ON
UnNamedArgument: "argument #1"
UnNamedOptionalArg: "second"
NamedFlag: "my flag"
template.bat
#::!/dos/rocks
#echo off
goto :init
:header
echo %__NAME% v%__VERSION%
echo This is a sample batch file template,
echo providing command-line arguments and flags.
echo.
goto :eof
:usage
echo USAGE:
echo %__BAT_NAME% [flags] "required argument" "optional argument"
echo.
echo. /?, --help shows this help
echo. /v, --version shows the version
echo. /e, --verbose shows detailed output
echo. -f, --flag value specifies a named parameter value
goto :eof
:version
if "%~1"=="full" call :header & goto :eof
echo %__VERSION%
goto :eof
:missing_argument
call :header
call :usage
echo.
echo **** ****
echo **** MISSING "REQUIRED ARGUMENT" ****
echo **** ****
echo.
goto :eof
:init
set "__NAME=%~n0"
set "__VERSION=1.23"
set "__YEAR=2017"
set "__BAT_FILE=%~0"
set "__BAT_PATH=%~dp0"
set "__BAT_NAME=%~nx0"
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedOptionalArg="
set "NamedFlag="
:parse
if "%~1"=="" goto :validate
if /i "%~1"=="/?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="-?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="--help" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="/v" call :version & goto :end
if /i "%~1"=="-v" call :version & goto :end
if /i "%~1"=="--version" call :version full & goto :end
if /i "%~1"=="/e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="-e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--verbose" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--flag" set "NamedFlag=%~2" & shift & shift & goto :parse
if /i "%~1"=="-f" set "NamedFlag=%~2" & shift & shift & goto :parse
if not defined UnNamedArgument set "UnNamedArgument=%~1" & shift & goto :parse
if not defined UnNamedOptionalArg set "UnNamedOptionalArg=%~1" & shift & goto :parse
shift
goto :parse
:validate
if not defined UnNamedArgument call :missing_argument & goto :end
:main
if defined OptVerbose (
echo **** DEBUG IS ON
)
echo UnNamedArgument: "%UnNamedArgument%"
if defined UnNamedOptionalArg echo UnNamedOptionalArg: "%UnNamedOptionalArg%"
if not defined UnNamedOptionalArg echo UnNamedOptionalArg: not provided
if defined NamedFlag echo NamedFlag: "%NamedFlag%"
if not defined NamedFlag echo NamedFlag: not provided
:end
call :cleanup
exit /B
:cleanup
REM The cleanup function is only really necessary if you
REM are _not_ using SETLOCAL.
set "__NAME="
set "__VERSION="
set "__YEAR="
set "__BAT_FILE="
set "__BAT_PATH="
set "__BAT_NAME="
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedArgument2="
set "NamedFlag="
goto :eof
There is no need to complicate it. It is simply command %1 %2 parameters, for example,
#echo off
xcopy %1 %2 /D /E /C /Q /H /R /K /Y /Z
echo copied %1 to %2
pause
The "pause" displays what the batch file has done and waits for you to hit the ANY key. Save that as xx.bat in the Windows folder.
To use it, type, for example:
xx c:\f\30\*.* f:\sites\30
This batch file takes care of all the necessary parameters, like copying only files, that are newer, etc. I have used it since before Windows. If you like seeing the names of the files, as they are being copied, leave out the Q parameter.
In batch file
set argument1=%1
set argument2=%2
echo %argument1%
echo %argument2%
%1 and %2 return the first and second argument values respectively.
And in command line, pass the argument
Directory> batchFileName admin P#55w0rd
Output will be
admin
P#55w0rd
#ECHO OFF
:Loop
IF "%1"=="" GOTO Continue
SHIFT
GOTO Loop
:Continue
Note: IF "%1"=="" will cause problems if %1 is enclosed in quotes itself.
In that case, use IF [%1]==[] or, in NT 4 (SP6) and later only, IF "%~1"=="" instead.
Everyone has answered with really complex responses, however it is actually really simple. %1 %2 %3 and so on are the arguements parsed to the file. %1 is arguement 1, %2 is arguement 2 and so on.
So, if I have a bat script containing this:
#echo off
echo %1
and when I run the batch script, I type in this:
C:> script.bat Hello
The script will simply output this:
Hello
This can be very useful for certain variables in a script, such as a name and age. So, if I have a script like this:
#echo off
echo Your name is: %1
echo Your age is: %2
When I type in this:
C:> script.bat Oliver 1000
I get the output of this:
Your name is: Oliver
Your age is: 1000
Let's keep this simple.
Here is the .cmd file.
#echo off
rem this file is named echo_3params.cmd
echo %1
echo %2
echo %3
set v1=%1
set v2=%2
set v3=%3
echo v1 equals %v1%
echo v2 equals %v2%
echo v3 equals %v3%
Here are 3 calls from the command line.
C:\Users\joeco>echo_3params 1abc 2 def 3 ghi
1abc
2
def
v1 equals 1abc
v2 equals 2
v3 equals def
C:\Users\joeco>echo_3params 1abc "2 def" "3 ghi"
1abc
"2 def"
"3 ghi"
v1 equals 1abc
v2 equals "2 def"
v3 equals "3 ghi"
C:\Users\joeco>echo_3params 1abc '2 def' "3 ghi"
1abc
'2
def'
v1 equals 1abc
v2 equals '2
v3 equals def'
C:\Users\joeco>
FOR %%A IN (%*) DO (
REM Now your batch file handles %%A instead of %1
REM No need to use SHIFT anymore.
ECHO %%A
)
This loops over the batch parameters (%*) either they are quoted or not, then echos each parameter.
I wrote a simple read_params script that can be called as a function (or external .bat) and will put all variables into the current environment. It won't modify the original parameters because the function is being called with a copy of the original parameters.
For example, given the following command:
myscript.bat some -random=43 extra -greeting="hello world" fluff
myscript.bat would be able to use the variables after calling the function:
call :read_params %*
echo %random%
echo %greeting%
Here's the function:
:read_params
if not %1/==/ (
if not "%__var%"=="" (
if not "%__var:~0,1%"=="-" (
endlocal
goto read_params
)
endlocal & set %__var:~1%=%~1
) else (
setlocal & set __var=%~1
)
shift
goto read_params
)
exit /B
Limitations
Cannot load arguments with no value such as -force. You could use -force=true but I can't think of a way to allow blank values without knowing a list of parameters ahead of time that won't have a value.
Changelog
2/18/2016
No longer requires delayed expansion
Now works with other command line arguments by looking for - before parameters.
Inspired by an answer elsewhere by #Jon, I have crafted a more general algorithm for extracting named parameters, optional values, and switches.
Let us say that we want to implement a utility foobar. It requires an initial command. It has an optional parameter --foo which takes an optional value (which cannot be another parameter, of course); if the value is missing it defaults to default. It also has an optional parameter --bar which takes a required value. Lastly it can take a flag --baz with no value allowed. Oh, and these parameters can come in any order.
In other words, it looks like this:
foobar <command> [--foo [<fooval>]] [--bar <barval>] [--baz]
Here is a solution:
#ECHO OFF
SETLOCAL
REM FooBar parameter demo
REM By Garret Wilson
SET CMD=%~1
IF "%CMD%" == "" (
GOTO usage
)
SET FOO=
SET DEFAULT_FOO=default
SET BAR=
SET BAZ=
SHIFT
:args
SET PARAM=%~1
SET ARG=%~2
IF "%PARAM%" == "--foo" (
SHIFT
IF NOT "%ARG%" == "" (
IF NOT "%ARG:~0,2%" == "--" (
SET FOO=%ARG%
SHIFT
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE IF "%PARAM%" == "--bar" (
SHIFT
IF NOT "%ARG%" == "" (
SET BAR=%ARG%
SHIFT
) ELSE (
ECHO Missing bar value. 1>&2
ECHO:
GOTO usage
)
) ELSE IF "%PARAM%" == "--baz" (
SHIFT
SET BAZ=true
) ELSE IF "%PARAM%" == "" (
GOTO endargs
) ELSE (
ECHO Unrecognized option %1. 1>&2
ECHO:
GOTO usage
)
GOTO args
:endargs
ECHO Command: %CMD%
IF NOT "%FOO%" == "" (
ECHO Foo: %FOO%
)
IF NOT "%BAR%" == "" (
ECHO Bar: %BAR%
)
IF "%BAZ%" == "true" (
ECHO Baz
)
REM TODO do something with FOO, BAR, and/or BAZ
GOTO :eof
:usage
ECHO FooBar
ECHO Usage: foobar ^<command^> [--foo [^<fooval^>]] [--bar ^<barval^>] [--baz]
EXIT /B 1
Use SETLOCAL so that the variables don't escape into the calling environment.
Don't forget to initialize the variables SET FOO=, etc. in case someone defined them in the calling environment.
Use %~1 to remove quotes.
Use IF "%ARG%" == "" and not IF [%ARG%] == [] because [ and ] don't play will at all with values ending in a space.
Even if you SHIFT inside an IF block, the current args such as %~1 don't get updated because they are determined when the IF is parsed. You could use %~1 and %~2 inside the IF block, but it would be confusing because you had a SHIFT. You could put the SHIFT at the end of the block for clarity, but that might get lost and/or confuse people as well. So "capturing" %~1 and %~1 outside the block seems best.
You don't want to use a parameter in place of another parameter's optional value, so you have to check IF NOT "%ARG:~0,2%" == "--".
Be careful only to SHIFT when you use one of the parameters.
The duplicate code SET FOO=%DEFAULT_FOO% is regrettable, but the alternative would be to add an IF "%FOO%" == "" SET FOO=%DEFAULT_FOO% outside the IF NOT "%ARG%" == "" block. However because this is still inside the IF "%PARAM%" == "--foo" block, the %FOO% value would have been evaluated and set before you ever entered the block, so you would never detect that both the --foo parameter was present and also that the %FOO% value was missing.
Note that ECHO Missing bar value. 1>&2 sends the error message to stderr.
Want a blank line in a Windows batch file? You gotta use ECHO: or one of the variations.
To refer to a set variable in command line you would need to use %a% so for example:
set a=100
echo %a%
rem output = 100
Note: This works for Windows 7 pro.
For to use looping get all arguments and in pure batch:
Obs: For using without: ?*&|<>
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && (
call set "_arg_[!_cnt!]=!_arg_!" && for /l %%l in (!_cnt! 1 !_cnt!
)do echo/ The argument n:%%l is: !_arg_[%%l]!
)
goto :eof
Your code is ready to do something with the argument number where it needs, like...
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && call set "_arg_[!_cnt!]=!_arg_!"
fake-command /u !_arg_[1]! /p !_arg_[2]! > test-log.txt
Simple solution(even though question is old)
Test1.bat
echo off
echo "Batch started"
set arg1=%1
echo "arg1 is %arg1%"
echo on
pause
CallTest1.bat
call "C:\Temp\Test1.bat" pass123
output
YourLocalPath>call "C:\Temp\test.bat" pass123
YourLocalPath>echo off
"Batch started"
"arg1 is pass123"
YourLocalPath>pause
Press any key to continue . . .
Where YourLocalPath is current directory path.
To keep things simple store the command param in variable and use variable for comparison.
Its not just simple to write but its simple to maintain as well so if later some other person or you read your script after long period of time, it will be easy to understand and maintain.
To write code inline : see other answers.
Make a new batch file (example: openclass.bat) and write this line in the file:
java %~n1
Then place the batch file in, let's say, the system32 folder, go to your Java class file, right click, Properties, Open with..., then find your batch file, select it and that's that...
It works for me.
PS: I can't find a way to close the cmd window when I close the Java class. For now...
Paired arguments
If you prefer passing the arguments in a key-value pair you can use something like this:
#echo off
setlocal enableDelayedExpansion
::::: asigning arguments as a key-value pairs:::::::::::::
set counter=0
for %%# in (%*) do (
set /a counter=counter+1
set /a even=counter%%2
if !even! == 0 (
echo setting !prev! to %%#
set "!prev!=%%~#"
)
set "prev=%%~#"
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: showing the assignments
echo %one% %two% %three% %four% %five%
endlocal
And an example :
c:>argumentsDemo.bat one 1 "two" 2 three 3 four 4 "five" 5
1 2 3 4 5
Predefined variables
You can also set some environment variables in advance. It can be done by setting them in the console or setting them from my computer:
#echo off
if defined variable1 (
echo %variable1%
)
if defined variable2 (
echo %variable2%
)
and calling it like:
c:\>set variable1=1
c:\>set variable2=2
c:\>argumentsTest.bat
1
2
File with listed values
You can also point to a file where the needed values are preset.
If this is the script:
#echo off
setlocal
::::::::::
set "VALUES_FILE=E:\scripts\values.txt"
:::::::::::
for /f "usebackq eol=: tokens=* delims=" %%# in ("%VALUES_FILE%") do set "%%#"
echo %key1% %key2% %some_other_key%
endlocal
and values file is this:
:::: use EOL=: in the FOR loop to use it as a comment
key1=value1
key2=value2
:::: do not left spaces arround the =
:::: or at the begining of the line
some_other_key=something else
and_one_more=more
the output of calling it will be:
value1 value2 something else
Of course you can combine all approaches. Check also arguments syntax , shift
If you're worried about security/password theft (that led you to design this solution that takes login credentials at execution instead of static hard coding without the need for a database), then you could store the api or half the code of password decryption or decryption key in the program file, so at run time, user would type username/password in console to be hashed/decrypted before passed to program code for execution via set /p, if you're looking at user entering credentials at run time.
If you're running a script to run your program with various user/password, then command line args will suit you.
If you're making a test file to see the output/effects of different logins, then you could store all the logins in an encrypted file, to be passed as arg to test.cmd, unless you wanna sit at command line & type all the logins until finished.
The number of args that can be supplied is limited to total characters on command line. To overcome this limitation, the previous paragraph trick is a workaround without risking exposure of user passwords.