I have tried macports:
port install openvrml
Also tried fink (with unstable tree configuration)
fink install openvrml6-xembed-dev
and both failed.
Also tried downloading the source form Sourceforge and don't know what do with those sources. OpenVRML from sourceforge
should I run just do this? :
./configure
make
Any help is very appreciated , thanks ;)
You don't give any information about what sorts of failures you've seen so it's difficult to guess. However, it looks like one fix for an openvrml build problem was just checked-in to macports. If the problem description looks familiar, you might want to try it again:
sudo port sync
sudo port install openvrml
Related
i need help. currently i want to use PHP redis on my macOS from this repo https://github.com/phpredis/phpredis
because there are many error when i direct clone from that repository, i decided to choose install the phpredis use MacPorts.
my specification mac is
macOS Cataline v 10.15.7
PHP 7.3.11
i'm using XAMPP 7.4.12
after i install the macPorts i did run this command
sudo port install php73-redis
the installation was good and no error. after that i restart my apache and also restart my mac.. but when i check on phpinfo() no function redis..
i also check on my file /opt/local/var/db/php73/redis.ini also contain extension=redis.so
what is missing from my steps? i still not able to set the PHPredis after that. please help
I have a problem with installation of PyLBFGS. I would be grateful if anyone could help me.
My problem is that I have python 3.10 in my Win10. By using pip install PyLBFGS in cmd , I have installed the package in my python. But when I want to use owlqn in the python code, I face with a error:
Thanks in advance for your help,
Regards,
Saleh
Well, I have the same problem on Ubuntu 20.04 and Python 3.9.9. What I did was dowload PyLBFGS package source and manually build it. Basically I did the following:
git clone https://github.com/larsmans/pylbfgs.git
cd pylbfgs
pip install .
Naturally, on Windows 10 you might have to adapt these steps, but this is the only way I was able to install this package. After that, the import works as expected.
Hello guys. Can someone help me about this one? I cant install mongodb because of dependency problem. I already tried updating my linux mint terminal.
dpkg: dependency problems prevent configuration of mongodb-enterprise-server:
mongodb-enterprise-server depends on libcurl3 (>= 7.16.2); however:
Package libcurl3 is not installed.
mongodb-enterprise-server depends on snmp; however:
Package snmp is not installed.
Installing via dpkg -i mongodb.deb will not include additional package dependencies. You should be able to fix your installation by following up with sudo apt --fix-broken install.
Unless you have strong reasons to avoid the standard process I would recommend following the tutorial to Install MongoDB Enterprise by adding the appropriate repo definitions. Adding the normal package repo will also make it easier for you to update to newer minor releases of MongoDB 4.0.x.
I've been trying to install MacPorts on a new Mac Pro with a fresh, fully updated Yosemite OS. The installer hangs on 'Running package scripts'. So I tried to build it from source. That works, with the installer stating:
Congratulations, you have successfully installed the MacPorts system.
However, it seems unusable. When I do sudo port install apache2 I get the message:
Error: Port apache2 not found
Simply trying to do a 'self update' (as root):
sh-3.2# port -d selfupdate
DEBUG: MacPorts sources location: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs
---> Updating MacPorts base sources using rsync
receiving file list ... done
base.tar
...and then nothing... I've waited for half an hour, but it won't go any further. I can't find any logs either.
Again: there's nothing special about my setup, it's out-of-the-box Yosemite, only updated through the App store and, of course, I've installed Xcode with command line utilities and formally accepted the license, as is required according to the MacPorts site.
I've also tried uninstalling it, using the instructions from the MacPorts site, and reinstalling. But it does not make a difference.
I've read quite a few forum posts, but I can't find any post relating a problem like this. I hope someone can shed some light on this.
The installer hangs running package scripts because the last statement in these package scripts is exactly this "sudo port selfupdate" that you've been running manually afterwards.
Because this step did never run, your MacPorts installation lacks knowledge about the apache2 port (which is exactly why the installer runs selfupdate to give you a full-featured installation).
Unfortunately Apple's infrastructure (rsync.macports.org) seems to have connectivity problems at the moment, which is causing problems for quite a few people. You can try using one of the mirrors as outlined at https://trac.macports.org/wiki/Mirrors.
I am trying to install CKAN on my local computer using Ubuntu 14.04 LTS.
I followed the instructions for installing from source found here and I try to check if solr is running by visiting http://localhost:8983/solr/.
I can see that Jetty is running because when I visit http://localhost:8983 I see that it is up.
I added the jdk as follows:
JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-amd64
I am getting a 500 error when i try to open the solr page:
HTTP ERROR 500
Problem accessing /solr/index.jsp. Reason:
JSP support not configured
Powered by Jetty://
Any ideas? Should I redo the whole thing from the start?
Edit/Update
I just couldn't do anything with this installation. The bigger problem was that installation files were meshed up! I tried to install tomcat/solr instead of jetty/solr and things went sour. So I just created a VM and did a fresh install there. For anyone interested I did a tomcat/solr installation following this and a CKAN installation following this (with out of course the solr instructions). Also, for some reason the CKAN installation has commented out the solr URL, so even if it is right, I had to delete the comment.
A fix has been documented by #mstantoncook here [2939] & [1651] How to solr-jetty JSP support
Note the last comment, sudo service jetty restart
It's a Jetty BUG on Ubuntu 14.04!
There is nothing wrong with Ckan itself.
Actually, there is a bug in the libjetty-extra-java package (version 6.1.26 and newer) in Ubuntu 14.04. The bug was introduced after Jetty (in Ubuntu) has changed it's dependences from libtomcat6-java to libtomcat7-java.
You can get more info about this bug in Ubuntu Launchpad: Bug #1508562 "Broken symlinks for JSP support in libjetty-extra-java version 6.1.26-1ubuntu1.1".
The bug is already fixed on Debian, and I'm hope it will be solved in Ubuntu 14.04 soon.
There are workarounds that may work for your case
I proposed some workarounds in this bug report, and since they can be useful for the Ckan users, I'll also replicate them here.
All of them consist on use both jetty and libtomcat7-java, but adding/replacing some classes (code ported from libtomcat6, in put in the jsp-2.1-6.0.2.jar file) to the Jetty classpath.
I don't know if they have some problem. Use them at your own risk!
Workaround 1 - Install the fix package proposed by vshn
I found this workaround here: https://github.com/ckan/ckan/pull/2966
In short:
wget https://launchpad.net/~vshn/+archive/ubuntu/solr/+files/solr-jetty-jsp-fix_1.0.2_all.deb
dpkg -i solr-jetty-jsp-fix_1.0.2_all.deb
service jetty restart
This will install a JSP jar that works (the file will be named jsp-2.1-6.0.2.jar, but it contains classes ported from libtomcat6).
Workaround 2 - Manually install the JSP jar
Download the same JAR file that the DEB package above would install.
wget https://bugs.launchpad.net/ubuntu/+source/jetty/+bug/1508562/+attachment/4785985/+files/jsp-2.1-6.0.2.jar
Now, move it to a proper location inside the Jetty config dir. I did it this way:
mkdir /etc/jetty/extra-jars
mv jsp-2.1-6.0.2.jar /etc/jetty/extra-jars
And add a line like this one in the Jetty start.config file:
echo "/etc/jetty/extra-jars/jsp-2.1-6.0.2.jar" >> /etc/jetty/start.config
And:
service jetty restart
Correct solution
The correct solution is to wait for the Ubuntu Team solution. However, while waiting for this fix, you can use any of the previous workarounds (I prefer the last one).
I hope they help you!
Try this steps:
sudo mv jsp-2.1-6.0.2.jar /usr/share/jetty/lib/.
change own:
sudo chown root:root /usr/share/jetty/lib/jsp-2.1-6.0.2.jar
finally restart jetty:
sudo service jetty restart
I followed this steps and now I can see localhost:8983/solr and localhost/solr/admin
In Ubuntu 14.04 this can be fixed with:
cd /tmp
wget https://launchpad.net/~vshn/+archive/ubuntu/solr/+files/solr-jetty-jsp-fix_1.0.2_all.deb
sudo dpkg -i solr-jetty-jsp-fix_1.0.2_all.deb
sudo service jetty restart
Following http://docs.ckan.org/en/ckan-1.6/solr-setup.html#single-solr-instance
(this one a bit old, but worked perfect for me )
You will have to edit /etc/profile and add this line to the end such as this to the end (adjusting the path for your machine’s jdk install:
JAVA_HOME=/usr/lib/jvm/java-6-openjdk-amd64/ (or other version)
then
export JAVA_HOME
sudo service jetty start