Trouble logging in to SQL2008 - sql-server

I recently installed SQL2008 and am having trouble logging in from another application. I have set the security to shared authentication and have specified a password for the SA login. I am able to log in using SA and password from the management studio and also from command prompt using the osql command, but when trying to log in from third party software (specifically, WhereNet VSS) I get the popup "The SQL Instance Name or login information is not correct. Please try again."
Any suggestions? Unfortunately I cannot install the software until I can successfully log in to the SQL server so it is critical that I get past this ASAP.
Thanks,
Joseph

Did you enable remote connections to your SQL Svr instance (see Server Properties, Connections)? Also, make sure the Windows (or proprietary) firewall isn't interfering w/ connectivity.

Other than allowing remote connections from SQL Server Instance properties --> connections - did you configure remote connections from SQL Server Surface Area Configuration tool? If not you might wanna play with those options to enable remote connections over TCP/IP and/or named pipes.
Also - did you check from the Configuration Manager Tool if TCP/IP properties are properly configured (TCP port properly set, etc.)
Did you try to do the same stuff on another machine and see if with the same settings it works?

Related

SQL Server connection string windows 7 and windows 10 - Named Pipes Provider, error 40 [duplicate]

I can't seem to connect to my database from a site. I get this error:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
I tried using the local IP address to connect as well as a public one. I've tried:
Yes, the site can communicate with the server
Named pipes/TCP is enabled.
Remote connections are allowed.
Windows Firewall is off
Created an exception for port 1433 in Windows Firewall.
Enabled everything in SQL Server Configuration Manager.
What else can I do here?
Solving this problem is very easy:
Go to control panel.
search for services.
Open Local services window from your search results
Restart your MSSQLSERVER service.
Screenshot of the steps:
And the simplest solution - check if your slash is back...
I spent about an hour trying to figure out what's wrong with SERVER/INSTANCENAME when everything is configured correctly, named pipes, user access rights... and suddenly it struck me, it's not a slash, it's a backslash (\).
The horror, the shame...
It's a three step process really after installing SQL Server:
Enable Named Pipes
SQL Config Manager --> SQL Server Network Consif --> Protocols --> Named Pipes --> Right-click --> Restart
Restart the server
SQL Config Manager --> SQL Server Services --> SQL Server (SQLEXPRESS) --> Right-click --> Restart
Use proper server and instance names (both are needed!)
Typically this would be .\SQLEXPRESS, for example see the screenshot from QueryExpress connection dialog.
There you have it.
I had just installed SQL SERVER 2012 developer. When I was creating my first SSIS package, I received this pipes error when I was trying to create a data connection task in SQL Server 2012 Data Tools in the Connection Manager box. I resolved with the help of the post above.
If choose a named instance and you call your named instance SSQDatabase1 and your pc's name is PCX1. You must enter PCX1\SSQDatabase1 not just SSQDatabase1
or you will receive the named pipes error.
A thread on MSDN Social, Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server, has a pretty decent list of possible issues that are related to your error. You may want to see if any of them could be what you're experiencing.
Incorrect connection string, such as using SqlExpress
Named Pipes(NP) was not enabled on the SQL instance
Remote connection was not enabled
Server not started, or point to not a real server in your connection string
Other reasons such as incorrect security context
try basic connectivity tests between the two machines you are working on
i Just enabled TCP/IP,VIA,Named Pipes in Sql Server Configuration manager , My problem got solved refer this for more info Resolving Named Pipes Error 40
Use SERVER\\ INSTANCE NAME .Using double backslash in my project solved my problem.
Thanks to Damian...
TCP/IP
Named Pipes
... both enabled
Web Config....(for localhost)
<add name="FooData" connectionString="Data Source=localhost\InstanceName;Initial Catalog=DatabaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
Did have the same problem. Spent like 6 hours when had to migrate some servers.
Tried all suggestions available on this topic and others.
Solution was as simple as server restart!
Very simple solution
use (local)\InstanceName
that's it. it worked for me.
TL;DR; Your SQL Server instance is using dynamic ports which is not working. Force SQL Server to use static port # 1433.
Complete Details: First of all this problem is more likely if you've a mix of default and named instance or named instances only(which was my case).
Key concept: Each instance of Microsoft SQL Server installed on a computer uses a different port to listen for incoming connection requests. Default instance of SQL Server uses port # 1433. As you install named instances then they will start using dynamic ports which is decided at the time of start-up of Windows service corresponding to named SQL Server instance.
My code was failing (with error code 40) to connect to the only named SQL Server instance that I had on my VM. You can try below possible solutions:
Solution # 1: Client code trying to connect to SQL Server instance takes help from SQL Server browser service to figure out port number at which your named instance is listening for incoming connections. Make sure SQL browser service is running on your computer.
Solution # 2: Check the port # (in yellow color) your named SQL Server instance is using from SQL Server configuration manager as shown in the snapshot below:
Use that port number explicitly in your connection string or with sqlcmd shown below:
sqlcmd -s mymachinename,11380 -i deleteDB.sql -o SQLDelete.txt
Solution # 3: Force your named instance to use port # 1433 which is used by default instance. Remember this will work only if you don't have any default SQL Server instance on your computer as the default SQL Server instance would be using using port # 1433 already. Same port number can't be uses by two different Windows services.
Mark TCP Dynamic ports field to blank and TCP Port field to 1433.
Change the port number in your connection string as shown below:
sqlcmd -s mymachinename\instanceName -i deleteDB.sql -o SQLDelete.txt
OR
sqlcmd -s mymachinename,1433 -i deleteDB.sql -o SQLDelete.txt
Note: Every change in TCP/IP settings requires corresponding Windows service restart.
Interestingly enough after resolving the error when I went back to dynamic port setting to reproduce the same error then it didn't happen. Not sure why.
Please read below interesting threads to know more about dynamic ports of SQL Server:
How to configure SQL Server Port on multiple instances?
When is a Dynamic Port “dynamic”?
When to use a TCP dynamic port and when TCP Port?
I got leads to solution of my problem from this blog.
in my case, i had a standalone server, i changed the sql server port default port 1433 in configuration manager to some number and restarted the sql serve service to take effect,i was able to connect to the sql server through management studio if i login to the server. but i was not able to connect from my local machine through sql server, i was getting the error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 5)
I checked and verified all the below
-Named pipes/TCP is enabled.
-Remote connections are allowed.
-Windows Firewall is off
-Created an exception for portin Windows Firewall( this was not necessary in my case as the server is in same subnet network).
-Enabled everything in SQL Server Configuration Manager.
then i chnaged back the port number to default 1433 and restarted the sql server service, and the issue got resolved and i am able to connect the sql server from my local management studio.
I had the same problem. I use the MSSQL Server Management Studio 2017 and solved this problem using these steps:
Check for working fine SQL Server Services services or not.
Also check for working in good condition SQL Server (MSSQLSERVER).
Also check for working fine SQL Server Browser.
Restart SQL Server (MSSQLSERVER)
and fixed it.
You will find most likely your DB name is not correct, you will see the server name in VS like "DESKTOP-0I14BKI" but if you open up SSMS you will see DESKTOP-0I14BKI\SQLBLAHBLAH , simply add "\SQLBLAHBLAH" (instance name) to your "server name" in VS connection properties.
You will see:
To Fix:
Try the following steps:
Open Services window (open "run box" and type services.msc).
Looking for SQL services (with SQL prefix).
Start them (if cannot start. Goto step 4).
Right_click to each service -> Properties -> Change to tab "Log on"-> choise log on as "Local ..." -> 0K. Then start SQL services again.
Try Open SQL and connect database.
In my case,
I opened SQL Server Management Studio and searched for SQLEXPRESS in my Database engine.
It had two instances and I selected the correct one.
If you are working with Asp.net core and using appsettings.json than write server as localhost and after write sql instance name for enabled named pipe like this
"ConnectionString": {
"dewDB": "server=localhost\\dewelopersql;database=dewdb;User ID=sa;password=XXXXX",
},
After following all the steps mentioned here, if it still does not connect, try adding the DNS with the IP address in the hosts file in the etc folder. Adding an IP address instead of DNS name in the connection string should be a temporary solution to check if the connection actually works.
I tried using the local IP address to connect as well as a public one.
I've tried:
Yes, the site can communicate with the server Named pipes/TCP is
enabled. Remote connections are allowed. Windows Firewall is off
Created an exception for port 1433 in Windows Firewall. Enabled
everything in SQL Server Configuration Manager.
i ensured and did the above as well and I just want to share that the DOUBLE BACKSLASH
oBuilder.DataSource = "SPECIFICPCNAME\SQLEXPRESS";
Using a SINGLE BACKSLASH resulted into a build error i.e.: Error 1 Unrecognized escape sequence
I hope this helps the next guy - I've sacrificed dinner, midnight snack and NBA highlights time solving this (shame)
Thanks to [Tamizh venthan]
^_^
Enable TCP/Ip , Piped Protocol by going to Computer Management ->SQL and Services, ensure the Service is On. Enbale the port on the Firewall. Try to login through Command Prompt -> as Admin; last the User Name
should be (local)\SQLEXPRESS. Hope this helps.
Open SQL Server Configuration Manager
Select SQL Server Services from right.
Find your server from right and go to its properties (with right click)
Change log on method to Local System.
I had the same problem and solved the problem by disabling my firewall(ESET).
The first step to solve this problem should be to try pinging your own computer from another computer. If you have firewall on, you may not be able to ping yourself. I tried pinging my own pc, then ping was failed(didnt get response from the server)
I was trying to add a new connection in VS2015. None of the suggestions here worked. Suspecting some sort of a bug in the wizard, especially since SSMS was able to connect just fine, I decided to try and trick it. It worked!
Instead of adding the connection, use "Create new SQL Server Database". Enter your server name and a random name for the new DB, e.g. "test".
Assuming this succeeds, open Server Explorer in VS, locate the connection in Data Connections, right-click it and select Modify Connection.
Change "test" (from step 1) to the name of the existing database you want to connect to. Click "Test Connection". This time it should work!
Delete the temporary database you created in step 1.
I have one more solution, I think.
I recently had changed my computer name so, after I couldn't connect still after trying all above methods.
I changed the Server name..
Server name => (browse for more) => under database engine, a new server was found same as computers new name.
This worked, and life is good again.
I struggled for ages on this one before I realized my error - I had used commas instead of semicolons in the connect string
I had this issue but none of the suggestions above fixed it.
I was seeing this issue when I deployed my website to IIS. The fix was to go into advanced settings against the default app pool and change the identity property from the default to Administrator.
For me it was a Firewall issue.
First you have to add the port (such as 1444 and maybe 1434) but also
C:\Program Files (x86)\Microsoft SQL Server\90\Shared\sqlbrowser.exe
and
%ProgramFiles%\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\Binn\SQLAGENT.EXE
The second time I got this issue is when I came back to the firewall, the paths were not correct and I needed to update form 12 to 13! Simply clicking on browse in the Programs and Services tab helped to realise this.
Finally, try running the command
EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null
For me, it returned the error reason
I tried pretty much everything on this page but I had some underlying issues which were actually what needed to be resolved. I was unable to do certain things like open SQL Server Configuration Manager, which ended up being corrupt/missing WMI provider files.
There are lots of tedious ways to resolve this issues according to what I've read, but the tool from tweaking.com was able to remove and replace/repair my WMI (Windows Management Instrumentation) Provider files.
I used to do computer repair and overall the tweaking.com tool really impressed me, and it was suggested from one of the WMI error forum pages I went to.
After I fixed this issue I was able to connect to my SQL db, both locally and remotely.
Hope this helps someone.
open port number 1433 on your server for sql remote connection
If you tried restarting the MSSQLSERVER service, and it did not work, this might be a solution:
If you are using SQLExpress, your server name should be as the following ComputerName\SQLExpress. However, for SQLDeveloper, you do not have to right SQLDeveloper after your ComputerName.

ASP.NET MVC & SQL Server [duplicate]

I can't seem to connect to my database from a site. I get this error:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
I tried using the local IP address to connect as well as a public one. I've tried:
Yes, the site can communicate with the server
Named pipes/TCP is enabled.
Remote connections are allowed.
Windows Firewall is off
Created an exception for port 1433 in Windows Firewall.
Enabled everything in SQL Server Configuration Manager.
What else can I do here?
Solving this problem is very easy:
Go to control panel.
search for services.
Open Local services window from your search results
Restart your MSSQLSERVER service.
Screenshot of the steps:
And the simplest solution - check if your slash is back...
I spent about an hour trying to figure out what's wrong with SERVER/INSTANCENAME when everything is configured correctly, named pipes, user access rights... and suddenly it struck me, it's not a slash, it's a backslash (\).
The horror, the shame...
It's a three step process really after installing SQL Server:
Enable Named Pipes
SQL Config Manager --> SQL Server Network Consif --> Protocols --> Named Pipes --> Right-click --> Restart
Restart the server
SQL Config Manager --> SQL Server Services --> SQL Server (SQLEXPRESS) --> Right-click --> Restart
Use proper server and instance names (both are needed!)
Typically this would be .\SQLEXPRESS, for example see the screenshot from QueryExpress connection dialog.
There you have it.
I had just installed SQL SERVER 2012 developer. When I was creating my first SSIS package, I received this pipes error when I was trying to create a data connection task in SQL Server 2012 Data Tools in the Connection Manager box. I resolved with the help of the post above.
If choose a named instance and you call your named instance SSQDatabase1 and your pc's name is PCX1. You must enter PCX1\SSQDatabase1 not just SSQDatabase1
or you will receive the named pipes error.
A thread on MSDN Social, Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server, has a pretty decent list of possible issues that are related to your error. You may want to see if any of them could be what you're experiencing.
Incorrect connection string, such as using SqlExpress
Named Pipes(NP) was not enabled on the SQL instance
Remote connection was not enabled
Server not started, or point to not a real server in your connection string
Other reasons such as incorrect security context
try basic connectivity tests between the two machines you are working on
i Just enabled TCP/IP,VIA,Named Pipes in Sql Server Configuration manager , My problem got solved refer this for more info Resolving Named Pipes Error 40
Use SERVER\\ INSTANCE NAME .Using double backslash in my project solved my problem.
Thanks to Damian...
TCP/IP
Named Pipes
... both enabled
Web Config....(for localhost)
<add name="FooData" connectionString="Data Source=localhost\InstanceName;Initial Catalog=DatabaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
Did have the same problem. Spent like 6 hours when had to migrate some servers.
Tried all suggestions available on this topic and others.
Solution was as simple as server restart!
Very simple solution
use (local)\InstanceName
that's it. it worked for me.
TL;DR; Your SQL Server instance is using dynamic ports which is not working. Force SQL Server to use static port # 1433.
Complete Details: First of all this problem is more likely if you've a mix of default and named instance or named instances only(which was my case).
Key concept: Each instance of Microsoft SQL Server installed on a computer uses a different port to listen for incoming connection requests. Default instance of SQL Server uses port # 1433. As you install named instances then they will start using dynamic ports which is decided at the time of start-up of Windows service corresponding to named SQL Server instance.
My code was failing (with error code 40) to connect to the only named SQL Server instance that I had on my VM. You can try below possible solutions:
Solution # 1: Client code trying to connect to SQL Server instance takes help from SQL Server browser service to figure out port number at which your named instance is listening for incoming connections. Make sure SQL browser service is running on your computer.
Solution # 2: Check the port # (in yellow color) your named SQL Server instance is using from SQL Server configuration manager as shown in the snapshot below:
Use that port number explicitly in your connection string or with sqlcmd shown below:
sqlcmd -s mymachinename,11380 -i deleteDB.sql -o SQLDelete.txt
Solution # 3: Force your named instance to use port # 1433 which is used by default instance. Remember this will work only if you don't have any default SQL Server instance on your computer as the default SQL Server instance would be using using port # 1433 already. Same port number can't be uses by two different Windows services.
Mark TCP Dynamic ports field to blank and TCP Port field to 1433.
Change the port number in your connection string as shown below:
sqlcmd -s mymachinename\instanceName -i deleteDB.sql -o SQLDelete.txt
OR
sqlcmd -s mymachinename,1433 -i deleteDB.sql -o SQLDelete.txt
Note: Every change in TCP/IP settings requires corresponding Windows service restart.
Interestingly enough after resolving the error when I went back to dynamic port setting to reproduce the same error then it didn't happen. Not sure why.
Please read below interesting threads to know more about dynamic ports of SQL Server:
How to configure SQL Server Port on multiple instances?
When is a Dynamic Port “dynamic”?
When to use a TCP dynamic port and when TCP Port?
I got leads to solution of my problem from this blog.
in my case, i had a standalone server, i changed the sql server port default port 1433 in configuration manager to some number and restarted the sql serve service to take effect,i was able to connect to the sql server through management studio if i login to the server. but i was not able to connect from my local machine through sql server, i was getting the error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 5)
I checked and verified all the below
-Named pipes/TCP is enabled.
-Remote connections are allowed.
-Windows Firewall is off
-Created an exception for portin Windows Firewall( this was not necessary in my case as the server is in same subnet network).
-Enabled everything in SQL Server Configuration Manager.
then i chnaged back the port number to default 1433 and restarted the sql server service, and the issue got resolved and i am able to connect the sql server from my local management studio.
I had the same problem. I use the MSSQL Server Management Studio 2017 and solved this problem using these steps:
Check for working fine SQL Server Services services or not.
Also check for working in good condition SQL Server (MSSQLSERVER).
Also check for working fine SQL Server Browser.
Restart SQL Server (MSSQLSERVER)
and fixed it.
You will find most likely your DB name is not correct, you will see the server name in VS like "DESKTOP-0I14BKI" but if you open up SSMS you will see DESKTOP-0I14BKI\SQLBLAHBLAH , simply add "\SQLBLAHBLAH" (instance name) to your "server name" in VS connection properties.
You will see:
To Fix:
Try the following steps:
Open Services window (open "run box" and type services.msc).
Looking for SQL services (with SQL prefix).
Start them (if cannot start. Goto step 4).
Right_click to each service -> Properties -> Change to tab "Log on"-> choise log on as "Local ..." -> 0K. Then start SQL services again.
Try Open SQL and connect database.
In my case,
I opened SQL Server Management Studio and searched for SQLEXPRESS in my Database engine.
It had two instances and I selected the correct one.
If you are working with Asp.net core and using appsettings.json than write server as localhost and after write sql instance name for enabled named pipe like this
"ConnectionString": {
"dewDB": "server=localhost\\dewelopersql;database=dewdb;User ID=sa;password=XXXXX",
},
After following all the steps mentioned here, if it still does not connect, try adding the DNS with the IP address in the hosts file in the etc folder. Adding an IP address instead of DNS name in the connection string should be a temporary solution to check if the connection actually works.
I tried using the local IP address to connect as well as a public one.
I've tried:
Yes, the site can communicate with the server Named pipes/TCP is
enabled. Remote connections are allowed. Windows Firewall is off
Created an exception for port 1433 in Windows Firewall. Enabled
everything in SQL Server Configuration Manager.
i ensured and did the above as well and I just want to share that the DOUBLE BACKSLASH
oBuilder.DataSource = "SPECIFICPCNAME\SQLEXPRESS";
Using a SINGLE BACKSLASH resulted into a build error i.e.: Error 1 Unrecognized escape sequence
I hope this helps the next guy - I've sacrificed dinner, midnight snack and NBA highlights time solving this (shame)
Thanks to [Tamizh venthan]
^_^
Enable TCP/Ip , Piped Protocol by going to Computer Management ->SQL and Services, ensure the Service is On. Enbale the port on the Firewall. Try to login through Command Prompt -> as Admin; last the User Name
should be (local)\SQLEXPRESS. Hope this helps.
Open SQL Server Configuration Manager
Select SQL Server Services from right.
Find your server from right and go to its properties (with right click)
Change log on method to Local System.
I had the same problem and solved the problem by disabling my firewall(ESET).
The first step to solve this problem should be to try pinging your own computer from another computer. If you have firewall on, you may not be able to ping yourself. I tried pinging my own pc, then ping was failed(didnt get response from the server)
I was trying to add a new connection in VS2015. None of the suggestions here worked. Suspecting some sort of a bug in the wizard, especially since SSMS was able to connect just fine, I decided to try and trick it. It worked!
Instead of adding the connection, use "Create new SQL Server Database". Enter your server name and a random name for the new DB, e.g. "test".
Assuming this succeeds, open Server Explorer in VS, locate the connection in Data Connections, right-click it and select Modify Connection.
Change "test" (from step 1) to the name of the existing database you want to connect to. Click "Test Connection". This time it should work!
Delete the temporary database you created in step 1.
I have one more solution, I think.
I recently had changed my computer name so, after I couldn't connect still after trying all above methods.
I changed the Server name..
Server name => (browse for more) => under database engine, a new server was found same as computers new name.
This worked, and life is good again.
I struggled for ages on this one before I realized my error - I had used commas instead of semicolons in the connect string
I had this issue but none of the suggestions above fixed it.
I was seeing this issue when I deployed my website to IIS. The fix was to go into advanced settings against the default app pool and change the identity property from the default to Administrator.
For me it was a Firewall issue.
First you have to add the port (such as 1444 and maybe 1434) but also
C:\Program Files (x86)\Microsoft SQL Server\90\Shared\sqlbrowser.exe
and
%ProgramFiles%\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\Binn\SQLAGENT.EXE
The second time I got this issue is when I came back to the firewall, the paths were not correct and I needed to update form 12 to 13! Simply clicking on browse in the Programs and Services tab helped to realise this.
Finally, try running the command
EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null
For me, it returned the error reason
I tried pretty much everything on this page but I had some underlying issues which were actually what needed to be resolved. I was unable to do certain things like open SQL Server Configuration Manager, which ended up being corrupt/missing WMI provider files.
There are lots of tedious ways to resolve this issues according to what I've read, but the tool from tweaking.com was able to remove and replace/repair my WMI (Windows Management Instrumentation) Provider files.
I used to do computer repair and overall the tweaking.com tool really impressed me, and it was suggested from one of the WMI error forum pages I went to.
After I fixed this issue I was able to connect to my SQL db, both locally and remotely.
Hope this helps someone.
open port number 1433 on your server for sql remote connection
If you tried restarting the MSSQLSERVER service, and it did not work, this might be a solution:
If you are using SQLExpress, your server name should be as the following ComputerName\SQLExpress. However, for SQLDeveloper, you do not have to right SQLDeveloper after your ComputerName.

How do I fix the error 'Named Pipes Provider, error 40 - Could not open a connection to' SQL Server'?

I can't seem to connect to my database from a site. I get this error:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
I tried using the local IP address to connect as well as a public one. I've tried:
Yes, the site can communicate with the server
Named pipes/TCP is enabled.
Remote connections are allowed.
Windows Firewall is off
Created an exception for port 1433 in Windows Firewall.
Enabled everything in SQL Server Configuration Manager.
What else can I do here?
Solving this problem is very easy:
Go to control panel.
search for services.
Open Local services window from your search results
Restart your MSSQLSERVER service.
Screenshot of the steps:
And the simplest solution - check if your slash is back...
I spent about an hour trying to figure out what's wrong with SERVER/INSTANCENAME when everything is configured correctly, named pipes, user access rights... and suddenly it struck me, it's not a slash, it's a backslash (\).
The horror, the shame...
It's a three step process really after installing SQL Server:
Enable Named Pipes
SQL Config Manager --> SQL Server Network Consif --> Protocols --> Named Pipes --> Right-click --> Restart
Restart the server
SQL Config Manager --> SQL Server Services --> SQL Server (SQLEXPRESS) --> Right-click --> Restart
Use proper server and instance names (both are needed!)
Typically this would be .\SQLEXPRESS, for example see the screenshot from QueryExpress connection dialog.
There you have it.
I had just installed SQL SERVER 2012 developer. When I was creating my first SSIS package, I received this pipes error when I was trying to create a data connection task in SQL Server 2012 Data Tools in the Connection Manager box. I resolved with the help of the post above.
If choose a named instance and you call your named instance SSQDatabase1 and your pc's name is PCX1. You must enter PCX1\SSQDatabase1 not just SSQDatabase1
or you will receive the named pipes error.
A thread on MSDN Social, Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server, has a pretty decent list of possible issues that are related to your error. You may want to see if any of them could be what you're experiencing.
Incorrect connection string, such as using SqlExpress
Named Pipes(NP) was not enabled on the SQL instance
Remote connection was not enabled
Server not started, or point to not a real server in your connection string
Other reasons such as incorrect security context
try basic connectivity tests between the two machines you are working on
i Just enabled TCP/IP,VIA,Named Pipes in Sql Server Configuration manager , My problem got solved refer this for more info Resolving Named Pipes Error 40
Use SERVER\\ INSTANCE NAME .Using double backslash in my project solved my problem.
Thanks to Damian...
TCP/IP
Named Pipes
... both enabled
Web Config....(for localhost)
<add name="FooData" connectionString="Data Source=localhost\InstanceName;Initial Catalog=DatabaseName;Integrated Security=True;" providerName="System.Data.SqlClient" />
Did have the same problem. Spent like 6 hours when had to migrate some servers.
Tried all suggestions available on this topic and others.
Solution was as simple as server restart!
Very simple solution
use (local)\InstanceName
that's it. it worked for me.
TL;DR; Your SQL Server instance is using dynamic ports which is not working. Force SQL Server to use static port # 1433.
Complete Details: First of all this problem is more likely if you've a mix of default and named instance or named instances only(which was my case).
Key concept: Each instance of Microsoft SQL Server installed on a computer uses a different port to listen for incoming connection requests. Default instance of SQL Server uses port # 1433. As you install named instances then they will start using dynamic ports which is decided at the time of start-up of Windows service corresponding to named SQL Server instance.
My code was failing (with error code 40) to connect to the only named SQL Server instance that I had on my VM. You can try below possible solutions:
Solution # 1: Client code trying to connect to SQL Server instance takes help from SQL Server browser service to figure out port number at which your named instance is listening for incoming connections. Make sure SQL browser service is running on your computer.
Solution # 2: Check the port # (in yellow color) your named SQL Server instance is using from SQL Server configuration manager as shown in the snapshot below:
Use that port number explicitly in your connection string or with sqlcmd shown below:
sqlcmd -s mymachinename,11380 -i deleteDB.sql -o SQLDelete.txt
Solution # 3: Force your named instance to use port # 1433 which is used by default instance. Remember this will work only if you don't have any default SQL Server instance on your computer as the default SQL Server instance would be using using port # 1433 already. Same port number can't be uses by two different Windows services.
Mark TCP Dynamic ports field to blank and TCP Port field to 1433.
Change the port number in your connection string as shown below:
sqlcmd -s mymachinename\instanceName -i deleteDB.sql -o SQLDelete.txt
OR
sqlcmd -s mymachinename,1433 -i deleteDB.sql -o SQLDelete.txt
Note: Every change in TCP/IP settings requires corresponding Windows service restart.
Interestingly enough after resolving the error when I went back to dynamic port setting to reproduce the same error then it didn't happen. Not sure why.
Please read below interesting threads to know more about dynamic ports of SQL Server:
How to configure SQL Server Port on multiple instances?
When is a Dynamic Port “dynamic”?
When to use a TCP dynamic port and when TCP Port?
I got leads to solution of my problem from this blog.
in my case, i had a standalone server, i changed the sql server port default port 1433 in configuration manager to some number and restarted the sql serve service to take effect,i was able to connect to the sql server through management studio if i login to the server. but i was not able to connect from my local machine through sql server, i was getting the error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 5)
I checked and verified all the below
-Named pipes/TCP is enabled.
-Remote connections are allowed.
-Windows Firewall is off
-Created an exception for portin Windows Firewall( this was not necessary in my case as the server is in same subnet network).
-Enabled everything in SQL Server Configuration Manager.
then i chnaged back the port number to default 1433 and restarted the sql server service, and the issue got resolved and i am able to connect the sql server from my local management studio.
I had the same problem. I use the MSSQL Server Management Studio 2017 and solved this problem using these steps:
Check for working fine SQL Server Services services or not.
Also check for working in good condition SQL Server (MSSQLSERVER).
Also check for working fine SQL Server Browser.
Restart SQL Server (MSSQLSERVER)
and fixed it.
You will find most likely your DB name is not correct, you will see the server name in VS like "DESKTOP-0I14BKI" but if you open up SSMS you will see DESKTOP-0I14BKI\SQLBLAHBLAH , simply add "\SQLBLAHBLAH" (instance name) to your "server name" in VS connection properties.
You will see:
To Fix:
Try the following steps:
Open Services window (open "run box" and type services.msc).
Looking for SQL services (with SQL prefix).
Start them (if cannot start. Goto step 4).
Right_click to each service -> Properties -> Change to tab "Log on"-> choise log on as "Local ..." -> 0K. Then start SQL services again.
Try Open SQL and connect database.
In my case,
I opened SQL Server Management Studio and searched for SQLEXPRESS in my Database engine.
It had two instances and I selected the correct one.
If you are working with Asp.net core and using appsettings.json than write server as localhost and after write sql instance name for enabled named pipe like this
"ConnectionString": {
"dewDB": "server=localhost\\dewelopersql;database=dewdb;User ID=sa;password=XXXXX",
},
After following all the steps mentioned here, if it still does not connect, try adding the DNS with the IP address in the hosts file in the etc folder. Adding an IP address instead of DNS name in the connection string should be a temporary solution to check if the connection actually works.
I tried using the local IP address to connect as well as a public one.
I've tried:
Yes, the site can communicate with the server Named pipes/TCP is
enabled. Remote connections are allowed. Windows Firewall is off
Created an exception for port 1433 in Windows Firewall. Enabled
everything in SQL Server Configuration Manager.
i ensured and did the above as well and I just want to share that the DOUBLE BACKSLASH
oBuilder.DataSource = "SPECIFICPCNAME\SQLEXPRESS";
Using a SINGLE BACKSLASH resulted into a build error i.e.: Error 1 Unrecognized escape sequence
I hope this helps the next guy - I've sacrificed dinner, midnight snack and NBA highlights time solving this (shame)
Thanks to [Tamizh venthan]
^_^
Enable TCP/Ip , Piped Protocol by going to Computer Management ->SQL and Services, ensure the Service is On. Enbale the port on the Firewall. Try to login through Command Prompt -> as Admin; last the User Name
should be (local)\SQLEXPRESS. Hope this helps.
Open SQL Server Configuration Manager
Select SQL Server Services from right.
Find your server from right and go to its properties (with right click)
Change log on method to Local System.
I had the same problem and solved the problem by disabling my firewall(ESET).
The first step to solve this problem should be to try pinging your own computer from another computer. If you have firewall on, you may not be able to ping yourself. I tried pinging my own pc, then ping was failed(didnt get response from the server)
I was trying to add a new connection in VS2015. None of the suggestions here worked. Suspecting some sort of a bug in the wizard, especially since SSMS was able to connect just fine, I decided to try and trick it. It worked!
Instead of adding the connection, use "Create new SQL Server Database". Enter your server name and a random name for the new DB, e.g. "test".
Assuming this succeeds, open Server Explorer in VS, locate the connection in Data Connections, right-click it and select Modify Connection.
Change "test" (from step 1) to the name of the existing database you want to connect to. Click "Test Connection". This time it should work!
Delete the temporary database you created in step 1.
I have one more solution, I think.
I recently had changed my computer name so, after I couldn't connect still after trying all above methods.
I changed the Server name..
Server name => (browse for more) => under database engine, a new server was found same as computers new name.
This worked, and life is good again.
I struggled for ages on this one before I realized my error - I had used commas instead of semicolons in the connect string
I had this issue but none of the suggestions above fixed it.
I was seeing this issue when I deployed my website to IIS. The fix was to go into advanced settings against the default app pool and change the identity property from the default to Administrator.
For me it was a Firewall issue.
First you have to add the port (such as 1444 and maybe 1434) but also
C:\Program Files (x86)\Microsoft SQL Server\90\Shared\sqlbrowser.exe
and
%ProgramFiles%\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\Binn\SQLAGENT.EXE
The second time I got this issue is when I came back to the firewall, the paths were not correct and I needed to update form 12 to 13! Simply clicking on browse in the Programs and Services tab helped to realise this.
Finally, try running the command
EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null
For me, it returned the error reason
I tried pretty much everything on this page but I had some underlying issues which were actually what needed to be resolved. I was unable to do certain things like open SQL Server Configuration Manager, which ended up being corrupt/missing WMI provider files.
There are lots of tedious ways to resolve this issues according to what I've read, but the tool from tweaking.com was able to remove and replace/repair my WMI (Windows Management Instrumentation) Provider files.
I used to do computer repair and overall the tweaking.com tool really impressed me, and it was suggested from one of the WMI error forum pages I went to.
After I fixed this issue I was able to connect to my SQL db, both locally and remotely.
Hope this helps someone.
open port number 1433 on your server for sql remote connection
If you tried restarting the MSSQLSERVER service, and it did not work, this might be a solution:
If you are using SQLExpress, your server name should be as the following ComputerName\SQLExpress. However, for SQLDeveloper, you do not have to right SQLDeveloper after your ComputerName.

Unable to connect to SQL Server instance remotely

I’m trying to access the SQL Server instance on my VPS from SQL Server Management Studio on my local machine. It’s not working (the error I’m getting is:
A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections.
I think this is because I need to configure the database engine to allow remote connections (correct me if I’m wrong!). So I’ve found this step-by-step guide to help me do that: http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/ I’ve got to point 10 in the guide and I am now stuck! I don’t have SQL Server Management Studio installed on my VPS. Anyway, this has left me with two options:
Install SSMS
Find another way to do point 10 onwards in the guide without having SSMS installed
I tried installing SSMS on my VPS using the Web Platform Installer but it keeps failing. I don’t know why it’s failing because it doesn’t seem to give a reason why. Does anyone know how I could allow remote connections a different way?
The version of SQL Server installed on my VPS is SQL Server 2008 R2 Express.
Update:
I have tried to disable the firewall on both my laptop and VPS to see if it is a firewall issue. This made no difference to the error message.
Another Update:
Having now been able to install SSMS (I installed directly from the website rather than using the WPI), I have been able to check that the server is configured to allow remote connections (I went to SSMS, connected to the SQL Server instance, right-clicked on the connection, clicked Properties, went to the Connections tab. "Allow remote connections to this server" is already ticked).
SOLUTION
Thanks to everyone for helping me get to this solution! I've finally managed to get it to work! I followed Filip De Vos's advice and opened the ports in the Firewall on my VPS and then I received a different error message. This led me to investigate further and I found that I was using the wrong credentials to login! So I've set a password for the sa user and I've managed to login using that! Thanks again!
To enable mixed authentication you can change the following registry key:
HKLM\Software\Microsoft\Microsoft SQL Server\MSSQL.1\MSSQLServer\LoginMode
Update the value to 2 and restart the Sql Server service to allow mixed authentication. Note that MSSQL.1 might need to be updated to reflect the number of the SQL Server Instance you are attempting to change.
A reason for connection errors can be a virus scanner installed on the server which blocks sqlserver.exe.
Another reason can be that the SQL Server Browser service is not running. When this service is not running you cannot connect on named instances (when they are using dynamic ports).
It is also possible that Sql Server is not setup to listen to TCP connections and only allows named pipes.
In the Start Menu, open Programs > Microsoft SQL Server 2008 >
Configuration Tools > SQL Server Surface Area Configuration
In the Surface Area Configuration utility, click the link "SQL Server
Configuration Manager"
Expand "SQL Server Network Configuration" and
select Protocols.
Enable TCP/IP. If you need Named Pipes, then you can
enable them here as well.
Last but not least, the Windows firewall needs to allow connections to SQL Server
Add an exception for sqlserver.exe when you use the "Dynamic Port" system.
Otherwise you can put exceptions for the SQL Server ports (default port 1433)
Also add an exception for the SQL Server Browser. (udp port 1434)
More information:
How to: Configure a Windows Firewall for Database Engine Access
Server Connectivity How-to Topics (Database Engine)
As a last note, SqlLocalDB only supports named pipes, so you can not connect to it over the network.
In addition to configuring the SQL Server Browser service in Services.msc to Automatic, and starting the service, I had to enable TCP/IP in: SQL Server Configuration Manager | SQL Server Network Configuration | Protocols for [INSTANCE NAME] | TCP/IP
Launch SQL Server Configuration Manager on your VPS.
Take a look at the SQL Server Network Configuration. Make sure that TCP/IP is enabled.
Next look at SQL Server Services. Make sure that SQL Server Browser is running.
Restart the service for your instance of SQL Server.
Open the SQL Server Configuration Manager....
2.Check wheather TCP and UDP are running or not....
3.If not running , Please enable them and also check the SQL Server Browser is running or not.If not running turn it on.....
Next you have to check which ports TCP and UDP is using. You have to open those ports from your windows firewall.....
5.Click here to see the steps to open a specific port in windows firewall....
Now SQL Server is ready to access over LAN.......
If you wan to access it remotely (over internet) , you have to do another job that is 'Port Forwarding'. You have open the ports TCP and UDP is using in SQL Server on your router. Now the configuration of routers are different. If you give me the details of your router (i. e name of the company and version ) , I can show you the steps how to forward a specific port.
I had the same issue where my firewall was configured properly, TCP/IP was enabled in SQL Server Configuration Manager but I still could not access my SQL database from outside the computer hosting it. I found the solution was SQL Server Browser was disabled by default in Services (and no option was available to enable it in SQL Server Configuration Manager).
I enabled it by Control Panel > Administrative Tools > Services then double click on SQL Server Browser. In the General tab set the startup type to Automatic using the drop down list. Then go back into SQL Server Configuration Manager and check that the SQL Server Browser is enabled. Hope this helps.
Disable the firewall and try to connect.
If that works, then enable the firewall and
Windows Defender Firewall -> Advanced Settings -> Inbound Rules(Right Click) -> New Rules -> Port -> Allow Port 1433 (Public and Private) -> Add
Do the same for Outbound Rules.
Then Try again.
I recently upgraded from SQL 2008 R2 to SQL 2012 and had a similar issue. The problem was the firewall, but more specifically the firewall rule for SQL SERVER. The custom rule was pointed to the prior version of SQL Server. Try this, open Windows Firewall>Advanced setting. Find the SQL Server Rule (it may have a custom name). Right-Click and go to properties, then Programs and Services Tab. If Programs-This program is selected, you should browse for the proper version of sqlserver.exe.
If you have more than one Instances... Then make sure the PORT Numbers of all Instances are Unique and no one's PORT Number is 1433 except Default One...
Open SQL Server Configuration Manager.
Click SQL Server Services, on the right side choose the server you've created during installation (by default its state is stopped), click once on it and a play button should appear on the toolbar. Click on this play button, wait til its state turns to "Running". Now you're good.
Open SQL Server Management Studio; switch the "Server Type" to "Database Engine" and "Authentication" to "SQL Server Authentication". The default login is "sa", and the password is the password that you chose on creating the server. Now you're good to work.
In my case the problem was caused by the inconsistency between computer names. In system settings my computer was named with some long name, but apparently the name used for some certain communications was trimmed.
I changed the name in the settings to a shorter one and it worked.
I had built both a console app and a UWP app and my console connected fine, but not my UWP. After hours of banging my head against the desk - if it's a intranet server hosting the SQL database you must enable "Private Networks (Client & Server)". It's under Package.appxmanifest and the Capabilities tab.Screenshot
Before download the last version and update your sql server to fix errors of TLS 1.2 on Sql Server 2012. For more information, check here.

How to connect to SQL Server 2008

I have a desktop, and a Laptop. The Desktop has Windows 7 64-bit and the Laptop has Vista Ultimate 32-bit. On both machines I have SQL Server 2008 Standard installed.
On the laptop, I open SQL Management Studio and try to connect to the SQL Server on the desktop. It times out.
With SQL Server Config Manager I Enabled TCP/IP and Named Pipes for the client protocols.
In SQL Management Studio, I right clicked on the Database Engine, went to properties, and allowed remote connections. I also created a sql server login named "testuser" and a password. I then added that user as a login for my database and made them the database owner.
I could not figure out how to allow connection to my db throw the windows firewall, so I turned it off.
What am I missing? I made the same changes on my laptop, and I can connect from the Desktop to the Laptop in Management Studio?
Do you have a checklist?
Thanks.
UPDATE:
I turned off antivirus. Ran NetStat -a and the listener is listening.
If your login attempt takes about 30 seconds to timeout, then it's some kind of network connectivity problem (or SQL isn't listening properly). A permissions problem would come back after a few seconds, so the long wait says it's connection-related.
If you run "NETSTAT -a" on the server, so you see SQL Server listening on port 1433? If not, then maybe the SQL TCP Listener isn't configured properly on the server - there should be events in the Windows Event log to this effect when the SQL Service starts up.
Please edit your question with the results and we can go from there.
Try using Telnet to see if the laptop can see the desktop via port 1433.
Open a command prompt on the laptop and enter:
telnet DesktopNameOrIPAddress 1433
Press Enter, and you should either see a connection failed error, or a blank screen. If you get the blank screen, the connection was established. Press CTRL-] to break out of it, then type "quit" and enter to quit.
If the connection failed, attempt to resolve the general network issue with port 1433 before bothering to use the SQL Server tools.
If you have any other anti-virus software running, it may also have a firewall built in. I know that McAfee does, for instance. Check for that.
You've probably already thought of this, but have you checked that the server is configured to allow Mixed Mode Authentication? I have not had access to 2008, but I seem to remember that at least one of the previous versions was configured to disallow sql logins by default.
I assume you already did what you have to do on the OS level. Or maybe tried to link the server to see if you can actually traverse your network. Let me suggest a quick test. Check if you can actually test connectivity by creating a Universal Data Link. In case you don't know how to do this, create a new text file in your desktop (or anywhere) and change the .txt file extension to .udl; then just open it. See if your other server is "viewable" over the network (Don't forget to change the Provider to OLE DB Provider for SQL Server).
Is the SQL Browser Service running on the server you are trying to access? (By default this is disabled, and you'll need that to access SQL Server remotely)

Resources