while read line
do
if [ $line -ge $zero ]
then
a+=($line) ##here I am attempting to store the values in an array
else
for i in ${a[#]}
do
echo $(a[$i]) ## here I am trying to print them
done
fi
what is going wrong? it is giving this error:
a[1]: command not found
a[2]: command not found
a[3]: command not found
done
From the begining
if [ $line -ge $zero ]
what data type should be in $line?
-ge used in numeric comparison. If $line is a string than use = or if you just wnt to check that it's not empty use this syntax if [[ "$line" ]]
Next.
a+=($line)
Again if $line is a string then you should wrap in "" like this a+=("$line")
coz line can contain spaces.
For loop.
for i in ${a[#]}
do
echo $(a[$i]) ## here I am trying to print them
You'r messing with syntax here for i in ${a[#]} will iterate over arrays values, not indexes. And again if values are strings use "" like this for i in "${a[#]}"
So this echo $(a[$i]) won't work by 2 reasons. First you should use {} here, like this echo ${a[$i]}, second $i is not index, but it's may actualy work if it's a digit but in a wrong way. So here you need just echo $i coz $i is alredy a value from a array. Or rewrite foor loop.
for i in ${!a[#]}
do
echo ${a[$i]} ## here I am trying to print them
done
And last but not least, there is no done at the end of this script or it's just a part? So in the and it should look like this.
while read line; do
if [[ $line ]]; then
a+=( "$line" ) ##here I am attempting to store the values in an array
else
for i in ${!a[#]}; do
echo ${a[$i]} ## here I am trying to print them
done
fi
done < data.txt
echo ${a[#]} # print rusult
I have a file like this below:
-bash-4.2$ cat a1.txt
0 10.95.187.87 5444 up 0.333333 primary 0 false 0
1 10.95.187.88 5444 up 0.333333 standby 1 true 0
2 10.95.187.89 5444 up 0.333333 standby 0 false 0
I want to fetch the data from the above file into a 2D array.
Can you please help me with a suitable way to put into an array.
Also post putting we need put a condition to check whether the value in the 4th column is UP or DOWN. If it's UP then OK, if its down then below command needs to be executed.
-bash-4.2$ pcp_attach_node -w -U pcpuser -h localhost -p 9898 0
(The value at the end is getting fetched from the 1st column.
You could try something like that:
while read -r line; do
declare -a array=( $line ) # use IFS
echo "${array[0]}"
echo "${array[1]}" # and so on
if [[ "$array[3]" ]]; then
echo execute command...
fi
done < a1.txt
Or:
while read -r -a array; do
if [[ "$array[3]" ]]; then
echo execute command...
fi
done < a1.txt
This works only if field are space separated (any kind of space).
You could probably mix that with regexp if you need more precise control of the format.
Firstly, I don't think you can have 2D arrays in bash. But you can however store lines into a 1-D array.
Here is a script ,parse1a.sh, to demonstrate emulation of 2D arrays for the type of data you included:
#!/bin/bash
function get_element () {
line=${ARRAY[$1]}
echo $line | awk "{print \$$(($2+1))}" #+1 since awk is one-based
}
function set_element () {
line=${ARRAY[$1]}
declare -a SUBARRAY=($line)
SUBARRAY[$(($2))]=$3
ARRAY[$1]="${SUBARRAY[#]}"
}
ARRAY=()
while IFS='' read -r line || [[ -n "$line" ]]; do
#echo $line
ARRAY+=("$line")
done < "$1"
echo "Full array contents printout:"
printf "%s\n" "${ARRAY[#]}" # Full array contents printout.
for line in "${ARRAY[#]}"; do
#echo $line
if [ "$(echo $line | awk '{print $4}')" == "down" ]; then
echo "Replace this with what to do for down"
else
echo "...and any action for up - if required"
fi
done
echo "Element access of [2,3]:"
echo "get_element 2 3 : "
get_element 2 3
echo "set_element 2 3 left: "
set_element 2 3 left
echo "get_element 2 3 : "
get_element 2 3
echo "Full array contents printout:"
printf "%s\n" "${ARRAY[#]}" # Full array contents printout.
It can be executed by:
./parsea1 a1.txt
Hope this is close to what you are looking for. Note that this code will loose all indenting spaces during manipulation, but a formatted update of the lines could solve that.
I am having trouble with a script that prints out the index and items of the array and then allows the user to input an index that will print out that specific item of the array.
array=(abc def ghi)
i=0
while [ $i -lt ${#array[*]} ]; do
echo "[$i] ${array[$i]}"
i=$(($i+1));
done
echo -e "select an index: "; read answer
#this is the part that is troubling me
for index in ${!array[*]}; do
if [[ $answer == $index ]]; then
echo ${array[$index]}
break
else
echo "invalid"
break
fi
done
so if the user enters 0, it should print abc. 1 would be def etc. It currently only works for index 0.
Couple of problems in there that I can find:
you need a space right after $item to separate from the ]
$item should probably be $index
most importantly, remove the break after the "echo invalid" which is the reason the loop exits right after testing against '0' and doesn't check for the next array indexes. Using a flag then you should control if the answer matched any of the valid indexes, otherwise print the "invalid" message. I used a very explicit string test there for clarity.
A running code should look like:
array=(abc def ghi)
i=0
while [ $i -lt ${#array[*]} ]; do
echo "[$i] ${array[$i]}"
i=$(($i+1));
done
echo -e "select an index: "; read answer
for index in ${!array[*]}; do
found="FALSE"
if [[ "$answer" == "$index" ]]; then
found="TRUE"
echo "${array[$index]}"
break
fi
done
if [ "$found" == "FALSE" ]; then
echo "Invalid input $answer"
fi
I am trying to loop though an array in bash. The array is "AARON" currently that array fills index 0 with AARON. I want to be behave as such
ara[0] = A
ara[1] = A
ara[2] = R
ara[3] = O
ara[4] = N
My script currently looks like this.
#!/bin/bash
declare count
declare -a ara=(AARON)
for name in {A..Z}
do
count=$((count++))
for char in ${ara[*]}
do
if [[ ${ara[char]} -eq $name ]]
echo ${ara[char]} # for debugging purposes.
then
sum=$((sum + count))
fi
done
done
echo $sum #for debugging purposes.
Normally I would achieve this by setting a custom IFS but I don't know how I would do that for each character of string.
You want = not -eq for string comparison.
Your echo ${ara[char]} line is part of your if test not part of the if body.
Your count=$((count++)) assignment doesn't work correctly (it always sets count to zero) you want ((count++)) or count=$((++count)) instead.
You can use ${strvar:pos:count} to get parts of a string.
So something like this:
#!/bin/bash
declare count
declare -a ara=(AARON)
for name in {A..Z}
do
((count++))
for ((i=0; i<=${#ara[0]}; i++))
do
echo ${ara[0]:i:1} # for debugging purposes.
if [[ ${ara[0]:i:1} = $name ]]
then
sum=$((sum + count))
fi
done
done
echo $sum # for debugging purposes.
I would do something like this:
declare count
declare -a ara=(A A R O N)
for name in {A..Z}
do
for character in ${ara[*]}
do
if [[ ${character} == ${name} ]]
then
echo ${character} '=' ${name} # for debugging purposes.
let 'sum=sum+1'
fi
done
done
echo $sum #for debugging purposes.
You could add spaces into every letter to convert AARON in a bash array. Moreover, you could use "let" to inrease the counter.
How do I create an array in unix shell scripting?
The following code creates and prints an array of strings in shell:
#!/bin/bash
array=("A" "B" "ElementC" "ElementE")
for element in "${array[#]}"
do
echo "$element"
done
echo
echo "Number of elements: ${#array[#]}"
echo
echo "${array[#]}"
Result:
A
B
ElementC
ElementE
Number of elements: 4
A B ElementC ElementE
in bash, you create array like this
arr=(one two three)
to call the elements
$ echo "${arr[0]}"
one
$ echo "${arr[2]}"
three
to ask for user input, you can use read
read -p "Enter your choice: " choice
Bourne shell doesn't support arrays. However, there are two ways to handle the issue.
Use positional shell parameters $1, $2, etc.:
$ set one two three
$ echo $*
one two three
$ echo $#
3
$ echo $2
two
Use variable evaluations:
$ n=1 ; eval a$n="one"
$ n=2 ; eval a$n="two"
$ n=3 ; eval a$n="three"
$ n=2
$ eval echo \$a$n
two
#!/bin/bash
# define a array, space to separate every item
foo=(foo1 foo2)
# access
echo "${foo[1]}"
# add or changes
foo[0]=bar
foo[2]=cat
foo[1000]=also_OK
You can read the ABS "Advanced Bash-Scripting Guide"
The Bourne shell and C shell don't have arrays, IIRC.
In addition to what others have said, in Bash you can get the number of elements in an array as follows:
elements=${#arrayname[#]}
and do slice-style operations:
arrayname=(apple banana cherry)
echo ${arrayname[#]:1} # yields "banana cherry"
echo ${arrayname[#]: -1} # yields "cherry"
echo ${arrayname[${#arrayname[#]}-1]} # yields "cherry"
echo ${arrayname[#]:0:2} # yields "apple banana"
echo ${arrayname[#]:1:1} # yields "banana"
Try this :
echo "Find the Largest Number and Smallest Number of a given number"
echo "---------------------------------------------------------------------------------"
echo "Enter the number"
read n
i=0
while [ $n -gt 0 ] #For Seperating digits and Stored into array "x"
do
x[$i]=`expr $n % 10`
n=`expr $n / 10`
i=`expr $i + 1`
done
echo "Array values ${x[#]}" # For displaying array elements
len=${#x[*]} # it returns the array length
for (( i=0; i<len; i++ )) # For Sorting array elements using Bubble sort
do
for (( j=i+1; j<len; j++ ))
do
if [ `echo "${x[$i]} > ${x[$j]}"|bc` ]
then
t=${x[$i]}
t=${x[$i]}
x[$i]=${x[$j]}
x[$j]=$t
fi
done
done
echo "Array values ${x[*]}" # Displaying of Sorted Array
for (( i=len-1; i>=0; i-- )) # Form largest number
do
a=`echo $a \* 10 + ${x[$i]}|bc`
done
echo "Largest Number is : $a"
l=$a #Largest number
s=0
while [ $a -gt 0 ] # Reversing of number, We get Smallest number
do
r=`expr $a % 10`
s=`echo "$s * 10 + $r"|bc`
a=`expr $a / 10`
done
echo "Smallest Number is : $s" #Smallest Number
echo "Difference between Largest number and Smallest number"
echo "=========================================="
Diff=`expr $l - $s`
echo "Result is : $Diff"
echo "If you try it, We can get it"
Your question asks about "unix shell scripting", but is tagged bash. Those are two different answers.
The POSIX specification for shells does not have anything to say about arrays, as the original Bourne shell did not support them. Even today, on FreeBSD, Ubuntu Linux, and many other systems, /bin/sh does not have array support. So if you want your script to work in different Bourne-compatible shells, you shouldn't use them. Alternatively, if you are assuming a specific shell, then be sure to put its full name in the shebang line, e.g. #!/usr/bin/env bash.
If you are using bash or zsh, or a modern version of ksh, you can create an array like this:
myArray=(first "second element" 3rd)
and access elements like this
$ echo "${myArray[1]}" # for bash/ksh; for zsh, echo $myArray[2]
second element
You can get all the elements via "${myArray[#]}". You can use the slice notation ${array[#]:start:length} to restrict the portion of the array referenced, e.g. "${myArray[#]:1}" to leave off the first element.
The length of the array is ${#myArray[#]}. You can get a new array containing all the indexes from an existing array with "${!myArray[#]}".
Older versions of ksh before ksh93 also had arrays, but not the parenthesis-based notation, nor did they support slicing. You could create an array like this, though:
set -A myArray -- first "second element" 3rd
You can try of the following type :
#!/bin/bash
declare -a arr
i=0
j=0
for dir in $(find /home/rmajeti/programs -type d)
do
arr[i]=$dir
i=$((i+1))
done
while [ $j -lt $i ]
do
echo ${arr[$j]}
j=$((j+1))
done
An array can be loaded in twoways.
set -A TEST_ARRAY alpha beta gamma
or
X=0 # Initialize counter to zero.
-- Load the array with the strings alpha, beta, and gamma
for ELEMENT in alpha gamma beta
do
TEST_ARRAY[$X]=$ELEMENT
((X = X + 1))
done
Also, I think below information may help:
The shell supports one-dimensional arrays. The maximum number of array
elements is 1,024. When an array is defined, it is automatically
dimensioned to 1,024 elements. A one-dimensional array contains a
sequence of array elements, which are like the boxcars connected
together on a train track.
In case you want to access the array:
echo ${MY_ARRAY[2] # Show the third array element
gamma
echo ${MY_ARRAY[*] # Show all array elements
- alpha beta gamma
echo ${MY_ARRAY[#] # Show all array elements
- alpha beta gamma
echo ${#MY_ARRAY[*]} # Show the total number of array elements
- 3
echo ${#MY_ARRAY[#]} # Show the total number of array elements
- 3
echo ${MY_ARRAY} # Show array element 0 (the first element)
- alpha
If you want a key value store with support for spaces use the -A parameter:
declare -A programCollection
programCollection["xwininfo"]="to aquire information about the target window."
for program in ${!programCollection[#]}
do
echo "The program ${program} is used ${programCollection[${program}]}"
done
http://linux.die.net/man/1/bash "Associative arrays are created using declare -A name. "
There are multiple ways to create an array in shell.
ARR[0]="ABC"
ARR[1]="BCD"
echo ${ARR[*]}
${ARR[*]} prints all elements in the array.
Second way is:
ARR=("A" "B" "C" "D" 5 7 "J")
echo ${#ARR[#]}
echo ${ARR[0]}
${#ARR[#]} is used to count length of the array.
To read the values from keybord and insert element into array
# enter 0 when exit the insert element
echo "Enter the numbers"
read n
while [ $n -ne 0 ]
do
x[$i]=`expr $n`
read n
let i++
done
#display the all array elements
echo "Array values ${x[#]}"
echo "Array values ${x[*]}"
# To find the array length
length=${#x[*]}
echo $length
A Simple way :
arr=("sharlock" "bomkesh" "feluda" ) ##declare array
len=${#arr[*]} #determine length of array
# iterate with for loop
for (( i=0; i<len; i++ ))
do
echo ${arr[$i]}
done
In ksh you do it:
set -A array element1 element2 elementn
# view the first element
echo ${array[0]}
# Amount elements (You have to substitute 1)
echo ${#array[*]}
# show last element
echo ${array[ $(( ${#array[*]} - 1 )) ]}