When installing a package by using macports, my macbook did kernel panic.
After kernel panic, my macports told "macports registry malformed".
Therefore, I deleted "/opt/local/var/macports/registry/registry.db", and reinstall macports. So, packages are installed in /opt/local/ and cannot reinstall these package by macports, but my macports registry doesn't have a database of installed package.
How to make registry.db?
(My Mac OSX is El Capitan)
There is no easy way to reconstruct a registry.db. You should not have deleted the database.
Sometimes after a crash, the registry state can be recovered from the journal log if the registry is opened with write access, but this will not work if you deleted it.
Your only option at this point is to follow the uninstall instructions at https://guide.macports.org/#installing.macports.uninstalling and re-install all your ports.
Related
i need help. currently i want to use PHP redis on my macOS from this repo https://github.com/phpredis/phpredis
because there are many error when i direct clone from that repository, i decided to choose install the phpredis use MacPorts.
my specification mac is
macOS Cataline v 10.15.7
PHP 7.3.11
i'm using XAMPP 7.4.12
after i install the macPorts i did run this command
sudo port install php73-redis
the installation was good and no error. after that i restart my apache and also restart my mac.. but when i check on phpinfo() no function redis..
i also check on my file /opt/local/var/db/php73/redis.ini also contain extension=redis.so
what is missing from my steps? i still not able to set the PHPredis after that. please help
I've been trying to install MacPorts on a new Mac Pro with a fresh, fully updated Yosemite OS. The installer hangs on 'Running package scripts'. So I tried to build it from source. That works, with the installer stating:
Congratulations, you have successfully installed the MacPorts system.
However, it seems unusable. When I do sudo port install apache2 I get the message:
Error: Port apache2 not found
Simply trying to do a 'self update' (as root):
sh-3.2# port -d selfupdate
DEBUG: MacPorts sources location: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs
---> Updating MacPorts base sources using rsync
receiving file list ... done
base.tar
...and then nothing... I've waited for half an hour, but it won't go any further. I can't find any logs either.
Again: there's nothing special about my setup, it's out-of-the-box Yosemite, only updated through the App store and, of course, I've installed Xcode with command line utilities and formally accepted the license, as is required according to the MacPorts site.
I've also tried uninstalling it, using the instructions from the MacPorts site, and reinstalling. But it does not make a difference.
I've read quite a few forum posts, but I can't find any post relating a problem like this. I hope someone can shed some light on this.
The installer hangs running package scripts because the last statement in these package scripts is exactly this "sudo port selfupdate" that you've been running manually afterwards.
Because this step did never run, your MacPorts installation lacks knowledge about the apache2 port (which is exactly why the installer runs selfupdate to give you a full-featured installation).
Unfortunately Apple's infrastructure (rsync.macports.org) seems to have connectivity problems at the moment, which is causing problems for quite a few people. You can try using one of the mirrors as outlined at https://trac.macports.org/wiki/Mirrors.
I came in to the office yesterday morning to find that my Capybara tests couldn't interact with Chrome. I'm seeing
Selenium::WebDriver::Error::UnknownError: unknown error: unable to discover open pages
Googling around revealed that this was likely caused by an out-of-date chromedriver or selenium-webdriver, which sounded very plausible, since neither had been updated in a long time (I think chromedriver was at 2.2 and selenium-webdriver was at 2.35.1), and since Chrome auto-updated to 32.0.1700.77 on January 14, that seemed like good solid evidence to me.
So I've updated selenium-webdriver to 2.39.0. Figuring out what version of chromedriver I had been using actually turned out to be more difficult. I had a version of chromedriver sitting in my Downloads directory that I thought my code was referring to, but I couldn't find my Downloads directory in the PATH (I'm using OS X by the way). I tried replacing this file with version 2.8 from here, but it had no effect. I became skeptical that the version in my Downloads directory was the version that was being used in the first place, so I used brew to install it. brew info chromedriver now yields:
chromedriver: stable 2.8
http://code.google.com/p/chromedriver/
/usr/local/Cellar/chromedriver/2.8 (2 files, 21M) *
Built from source
From: https://github.com/Homebrew/homebrew/commits/master/Library/Formula/chromedriver.rb
Looks good. My PATH contains /usr/local/bin, which has a chromedriver link to the location brew installed to. As far as I understand it, this should allow my automation to detect and launch the chromedriver.
Unfortunately, my issue is still unresolved. I remain unable to discover pages. Can anyone confirm that I've done what one normally does to set up the chromedriver?
Side Question: After downloading chromedriver 2.8 directly and also installing it with brew, I tried launching both the downloaded version and the brew version separately to confirm that either version could launch successfully. I'm certain they are both in fact version 2.8, but when I launch either one the console says:
Starting ChromeDriver (v2.2) on port 9515
Is that normal? I certainly wasn't expecting it to say v2.2, but there are no other versions apart from 2.8 installed by brew (so I doubt brew is accidentally using the older version), and when I run the file I downloaded directly, I'm quite sure it's version 2.8 from the Chromedriver website. Is this an oversight on their part, or does v2.2 refer to something else, unlikely though that may seem?
It would be tricky to verify the chrome driver version frequently when you download it with homebrew. I would suggest downloading the driver and maintaining it in a folder mapped in your PATH.
So that maintaining or identifying the driver version will be easy with the below steps:
Go to the folder where you have chromeDriver
Open command prompt pointing the folder
run: chromeDriver -v
ChromeDriver is at version 2.16 now. I would recommend manually updating your driver instead of updating with whatever older version that homebrew wants to update you to.
You can use command line: pip freeze to list down all packages you have installed with their version.
Or you also can use pip show <package name> to check the details of the package, which also includes package version.
Click here
chrome driver version
for checking your chrome driver version.
Now it's time to check the latest release version. So click here latest release version
Compare between;
Mac OS X Lion 10.7.5(11G63)
installer-bbndk-bb10_1_x-macosx-338-201302012246-201302032157.dmg
BlackBerry10Simulator-Installer-BB10_1_X-338-Mac-201302031817.dmg
After install the upper two dmg files, I can find qde in the launchpad, but I can not find the "BlackBerry10Simulator-BB10_n_nn.vmwarevm" file".
I want to re-install ,so I run the app "BlackBerry10Simulator-Installer.app" in Finder->devices->BlackBerry10Simulator-BB10-1-x, just get the pop-up-box saying
The Installer cannot be run.
Multiple launches of this installer is not allowed. It will now quit
, and then the installer quit.
How can I find the simulator install path, or
How can I re-Install it successfully.
P.S.
At the first time installing, I did not change anything while installing, just clicked those "next","accept..." buttons.
I think the simulator should be installed in default file path, but I don't know where is it, and can't find it even searching "BlackBerry10Simulator" in Finder.
Maybe there is something wrong while first time installing simulator?
The BB10 simulators are VMware virtual machines. On a Mac, you need to have VMWare Fusion installed in order to run the simulator VM. This is mentioned in the system requirements. All the dmg installer does is uncompress the VMware image and place it on your hard drive. I just installed this myself, and the default location seems to be:
/Users/<your username>/Documents/Virtual Machines
Inside there should be a folder Blackberry10Simulator-BB10_1_X-338 and inside that there should be BlackBerry10Simulator-BB10_1_X.vmwarevm which contains the actual virtual machine .vmx and .vmdk files.
There should also be an alias (shortcut) created on your desktop to point to this location, called Blackberry 10 Simulator.
To uninstall, there is a script in Blackberry10Simulator-BB10_1_X-338/install called uninstaller which should remove everything and allow you to install again.
Unfortunately, VMWare Fusion is not free but you can sign up for a 30-day trial in order to be able to run the simulator and test out your app.
I recently encountered this error with a different installer (but also installanywhere based). There seems to be a problem with the mirroring feature in VM Ware Fusion and the multiple install detection in Install anywhere. If you disable mirroring, I suspect the "Multiple launches of this installer is not allowed." error will no longer occur.
hansarijanto$ port -v
MacPorts 2.0.3
hansarijanto$ xcodebuild -version
Xcode 4.3.2
Build version 4E2002
I am running the above xcode and macport version. on max os x
when I try to self update my mac port I get the following error.
hansarijanto$ sudo port selfupdate
Password:
---> Updating MacPorts base sources using rsync
MacPorts base version 2.0.3 installed,
MacPorts base version 2.0.4 downloaded.
---> Updating the ports tree
---> MacPorts base is outdated, installing new version 2.0.4
Installing new MacPorts release in /opt/local as root:admin; permissions 0755; Tcl-Package in /Library/Tcl
Error: /opt/local/bin/port: port selfupdate failed: Error installing new MacPorts base: shell command failed (see log for details)
I am trying to update mac port to install qt.
sudo port install qt4-mac-devel(error no SDK found)
which I need to install webkit-capybara
sudo gem install capybara-webkit -v '0.7.2'(error in setting up native environment)
You need to use the -d option to get enough information to diagnose this; but take a look at https://trac.macports.org/wiki/FAQ#selfupdatefails for common problems and solutions.
Seems Apple no longer installs Xcode's command line tools. See here: http://ericwilson.erics.ws/ericsblog/2012/8/26/macports-port-selfupdate-fail for solution.
Just wanted to add that on Mac OS 10.12 Sierra i was getting the WARNING: GNUSTEP_SYSTEM_ROOT is not defined error on selfupdate and i did already have the Xcode command line tools installed, licensed and working. But my copy of Xcode had become out of date, even though that was not showing up on the automatic software updates.
I had version 7 and for Sierra (and macports) you need version 8.
So I manually downloaded Xcode 8 via the App Store and it solved the problem for me.