I want to calculate the time in milliseconds taken by the execution of some part of my program. I've been looking online, but there's not much info on this topic. Any of you know how to do this?
Best way to answer is with an example:
#include <sys/time.h>
#include <stdlib.h>
#include <stdio.h>
#include <math.h>
/* Return 1 if the difference is negative, otherwise 0. */
int timeval_subtract(struct timeval *result, struct timeval *t2, struct timeval *t1)
{
long int diff = (t2->tv_usec + 1000000 * t2->tv_sec) - (t1->tv_usec + 1000000 * t1->tv_sec);
result->tv_sec = diff / 1000000;
result->tv_usec = diff % 1000000;
return (diff<0);
}
void timeval_print(struct timeval *tv)
{
char buffer[30];
time_t curtime;
printf("%ld.%06ld", tv->tv_sec, tv->tv_usec);
curtime = tv->tv_sec;
strftime(buffer, 30, "%m-%d-%Y %T", localtime(&curtime));
printf(" = %s.%06ld\n", buffer, tv->tv_usec);
}
int main()
{
struct timeval tvBegin, tvEnd, tvDiff;
// begin
gettimeofday(&tvBegin, NULL);
timeval_print(&tvBegin);
// lengthy operation
int i,j;
for(i=0;i<999999L;++i) {
j=sqrt(i);
}
//end
gettimeofday(&tvEnd, NULL);
timeval_print(&tvEnd);
// diff
timeval_subtract(&tvDiff, &tvEnd, &tvBegin);
printf("%ld.%06ld\n", tvDiff.tv_sec, tvDiff.tv_usec);
return 0;
}
Another option ( at least on some UNIX ) is clock_gettime and related functions. These allow access to various realtime clocks and you can select one of the higher resolution ones and throw away the resolution you don't need.
The gettimeofday function returns the time with microsecond precision (if the platform can support that, of course):
The gettimeofday() function shall
obtain the current time, expressed as
seconds and microseconds since the
Epoch, and store it in the timeval
structure pointed to by tp. The
resolution of the system clock is
unspecified.
C libraries have a function to let you get the system time. You can calculate elapsed time after you capture the start and stop times.
The function is called gettimeofday() and you can look at the man page to find out what to include and how to use it.
On Windows, you can just do this:
DWORD dwTickCount = GetTickCount();
// Perform some things.
printf("Code took: %dms\n", GetTickCount() - dwTickCount);
Not the most general/elegant solution, but nice and quick when you need it.
Related
I have a piece of code which I am using to create a sampling loop with high accuracy. It is in c and runs in raspberry pi 3.
The sampling loop specifies 5ms and is printing 5ms. But occasionally, I am seeing number other than 5ms printed on the terminal. It does not happen often, but it is still a crucial issue to my application.
Attached is a video of what I am saying. It happen around the 40 seconds mark.
Sampling Loop Occassionally show number other than 5ms:
https://youtu.be/SNcLf3Zg3_I?t=40
I would like to get some help to debug the issue. Is there something wrong with the code?
The code is as below:
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/time.h>
#define DT 0.005 //5ms
int mymillis();
int timeval_subtract(struct timeval *result, struct timeval *t2, struct timeval *t1);
int main() {
int startInt = mymillis();
struct timeval tvBegin, tvEnd, tvDiff;
gettimeofday(&tvBegin, NULL);
while (1)
{
startInt = mymillis();
//Each loop should be at least 5ms.
while (mymillis() - startInt < (DT * 1000))
{
usleep(100);
}
printf("Loop Time %d\n", mymillis() - startInt);
}
return 0;
}
int mymillis()
{
struct timeval tv;
gettimeofday(&tv, NULL);
return (tv.tv_sec) * 1000 + (tv.tv_usec) / 1000;
}
int timeval_subtract(struct timeval *result, struct timeval *t2, struct timeval *t1)
{
long int diff = (t2->tv_usec + 1000000 * t2->tv_sec) - (t1->tv_usec + 1000000 * t1->tv_sec);
result->tv_sec = diff / 1000000;
result->tv_usec = diff % 1000000;
return (diff<0);
}
`
Thank You.
man usleep specifies:
The usleep() function suspends execution of the calling thread for (at least) usec microseconds. The sleep may be lengthened slightly by any system activity or by the time spent processing the call or by the granularity of system timers.
There's no guarantee that the sleep will last exactly that longer. Even less can it be guaranteed that the two time samples taken with usleep in between will stand at exactly 5ms distance from one another.
Additionally you might sample the lengths of 5ms valued-runs to see if oversleeps happen randomly which would probably finally close the case.
I want to measure the time between the start to the end of the function in a loop. This difference will be used to set the amount of loops of the inner while-loops which does some here not important stuff.
I want to time the function like this :
#include <wiringPi.h>
#include <time.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#define BILLION 1E9
float hz = 1000;
long int nsPerTick = BILLION/hz;
double unprocessed = 1;
struct timespec now;
struct timespec last;
clock_gettime(CLOCK_REALTIME, &last);
[ ... ]
while (1)
{
clock_gettime(CLOCK_REALTIME, &now);
double diff = (last.tv_nsec - now.tv_nsec );
unprocessed = unprocessed + (diff/ nsPerTick);
clock_gettime(CLOCK_REALTIME, &last);
while (unprocessed >= 1) {
unprocessed --;
DO SOME RANDOM MAGIC;
}
}
The difference between the timer is always negative. I was told this was where the error was:
if ( (last.tv_nsec - now.tv_nsec)<0) {
double diff = 1000000000+ last.tv_nsec - now.tv_nsec;
}
else {
double diff = (last.tv_nsec - now.tv_nsec );
}
But still, my variable difference and is always negative like "-1095043244" (but the time spent during the function is a positive of course).
What's wrong?
Your first issue is that you have `last.tv_nsec - now.tv_nsec, which is the wrong way round.
last.tv_nsec is in the past (let's say it's set to 1), and now.tv_nsec will always be later (for example, 8ns later, so it's 9). In that case, last.tv_nsec - now.tv_nsec == 1 - 9 == -8.
The other issue is that tv_nsec isn't the time in nanoseconds: for that, you'd need to multiply the time in seconds by a billion and add that. So to get the difference in ns between now and last, you want:
((now.tv_sec - last.tv_sec) * ONE_BILLION) + (now.tv_nsec - last.tv_nsec)
(N.B. I'm still a little surprised that although now.tv_nsec and last.tv_nsec are both less than a billion, subtracting one from the other gives a value less than -1000000000, so there may yet be something I'm missing here.)
I was just investigating timing on Pi, with similar approach and similar problems. My thoughts are:
You don't have to use double. In fact you also don't need nano-seconds, as the clock on Pi has 1 microsecond accuracy anyway (it's the way the Broadcom did it). I suggest you to use gettimeofday() to get microsecs instead of nanosecs. Then computation is easy, it's just:
number of seconds + (1000 * 1000 * number of micros)
which you can simply calculate as unsigned int.
I've implemented the convenient API for this:
typedef struct
{
struct timeval startTimeVal;
} TIMER_usecCtx_t;
void TIMER_usecStart(TIMER_usecCtx_t* ctx)
{
gettimeofday(&ctx->startTimeVal, NULL);
}
unsigned int TIMER_usecElapsedUs(TIMER_usecCtx_t* ctx)
{
unsigned int rv;
/* get current time */
struct timeval nowTimeVal;
gettimeofday(&nowTimeVal, NULL);
/* compute diff */
rv = 1000000 * (nowTimeVal.tv_sec - ctx->startTimeVal.tv_sec) + nowTimeVal.tv_usec - ctx->startTimeVal.tv_usec;
return rv;
}
And the usage is:
TIMER_usecCtx_t timer;
TIMER_usecStart(&timer);
while (1)
{
if (TIMER_usecElapsedUs(timer) > yourDelayInMicroseconds)
{
doSomethingHere();
TIMER_usecStart(&timer);
}
}
Also notice the gettime() calls on Pi take almost 1 [us] to complete. So, if you need to call gettime() a lot and need more accuracy, go for some more advanced methods of getting time... I've explained more about it in this short article about Pi get-time calls
Well, I don't know C, but if it's a timing issue on a Raspberry Pi it might have something to do with the lack of an RTC (real time clock) on the chip.
You should not be storing last.tv_nsec - now.tv_nsec in a double.
If you look at the documentation of time.h, you can see that tv_nsec is stored as a long. So you will need something along the lines of:
long diff = end.tv_nsec - begin.tv_nsec
With that being said, only comparing the nanoseconds can go wrong. You also need to look at the number of seconds also. So to convert everything to seconds, you can use this:
long nanosec_diff = end.tv_nsec - begin.tv_nsec;
time_t sec_diff = end.tv_sec - begin.tv_sec; // need <sys/types.h> for time_t
double diff_in_seconds = sec_diff + nanosec_diff / 1000000000.0
Also, make sure you are always subtracting the end time from the start time (or else your time will still be negative).
And there you go!
Using the following code:
#include<stdio.h>
#include<time.h>
int main()
{
clock_t start, stop;
int i;
start = clock();
for(i=0; i<2000;i++)
{
printf("%d", (i*1)+(1^4));
}
printf("\n\n");
stop = clock();
//(double)(stop - start) / CLOCKS_PER_SEC
printf("%6.3f", start);
printf("\n\n%6.3f", stop);
return 0;
}
I get the following output:
56789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004
2.169
2.169
Start and stop times are the same. Does it mean that the program hardly takes time to complete execution?
If 1. is false, then atleast the no.of digits beyond the (.) should differ, which does not happen here. Is my logic correct?
Note: I need to calculate the time taken for execution, and hence the above code.
Yes, this program has likely used less than a millsecond. Try using microsecond resolution with timeval.
e.g:
#include <sys/time.h>
struct timeval stop, start;
gettimeofday(&start, NULL);
//do stuff
gettimeofday(&stop, NULL);
printf("took %lu us\n", (stop.tv_sec - start.tv_sec) * 1000000 + stop.tv_usec - start.tv_usec);
You can then query the difference (in microseconds) between stop.tv_usec - start.tv_usec. Note that this will only work for subsecond times (as tv_usec will loop). For the general case use a combination of tv_sec and tv_usec.
Edit 2016-08-19
A more appropriate approach on system with clock_gettime support would be:
struct timespec start, end;
clock_gettime(CLOCK_MONOTONIC_RAW, &start);
//do stuff
clock_gettime(CLOCK_MONOTONIC_RAW, &end);
uint64_t delta_us = (end.tv_sec - start.tv_sec) * 1000000 + (end.tv_nsec - start.tv_nsec) / 1000;
Here is what I write to get the timestamp in millionseconds.
#include<sys/time.h>
long long timeInMilliseconds(void) {
struct timeval tv;
gettimeofday(&tv,NULL);
return (((long long)tv.tv_sec)*1000)+(tv.tv_usec/1000);
}
A couple of things might affect the results you're seeing:
You're treating clock_t as a floating-point type, I don't think it is.
You might be expecting (1^4) to do something else than compute the bitwise XOR of 1 and 4., i.e. it's 5.
Since the XOR is of constants, it's probably folded by the compiler, meaning it doesn't add a lot of work at runtime.
Since the output is buffered (it's just formatting the string and writing it to memory), it completes very quickly indeed.
You're not specifying how fast your machine is, but it's not unreasonable for this to run very quickly on modern hardware, no.
If you have it, try adding a call to sleep() between the start/stop snapshots. Note that sleep() is POSIX though, not standard C.
This code snippet can be used for displaying time in seconds,milliseconds and microseconds:
#include <sys/time.h>
struct timeval start, stop;
double secs = 0;
gettimeofday(&start, NULL);
// Do stuff here
gettimeofday(&stop, NULL);
secs = (double)(stop.tv_usec - start.tv_usec) / 1000000 + (double)(stop.tv_sec - start.tv_sec);
printf("time taken %f\n",secs);
You can use gettimeofday() together with the timedifference_msec() function below to calculate the number of milliseconds elapsed between two samples:
#include <sys/time.h>
#include <stdio.h>
float timedifference_msec(struct timeval t0, struct timeval t1)
{
return (t1.tv_sec - t0.tv_sec) * 1000.0f + (t1.tv_usec - t0.tv_usec) / 1000.0f;
}
int main(void)
{
struct timeval t0;
struct timeval t1;
float elapsed;
gettimeofday(&t0, 0);
/* ... YOUR CODE HERE ... */
gettimeofday(&t1, 0);
elapsed = timedifference_msec(t0, t1);
printf("Code executed in %f milliseconds.\n", elapsed);
return 0;
}
Note that, when using gettimeofday(), you need to take seconds into account even if you only care about microsecond differences because tv_usec will wrap back to zero every second and you have no way of knowing beforehand at which point within a second each sample is obtained.
From man clock:
The clock() function returns an approximation of processor time used by the program.
So there is no indication you should treat it as milliseconds. Some standards require precise value of CLOCKS_PER_SEC, so you could rely on it, but I don't think it is advisable.
Second thing is that, as #unwind stated, it is not float/double. Man times suggests that will be an int.
Also note that:
this function will return the same value approximately every 72 minutes
And if you are unlucky you might hit the moment it is just about to start counting from zero, thus getting negative or huge value (depending on whether you store the result as signed or unsigned value).
This:
printf("\n\n%6.3f", stop);
Will most probably print garbage as treating any int as float is really not defined behaviour (and I think this is where most of your problem comes). If you want to make sure you can always do:
printf("\n\n%6.3f", (double) stop);
Though I would rather go for printing it as long long int at first:
printf("\n\n%lldf", (long long int) stop);
The standard C library provides timespec_get. It can tell time up to nanosecond precision, if the system supports. Calling it, however, takes a bit more effort because it involves a struct. Here's a function that just converts the struct to a simple 64-bit integer so you can get time in milliseconds.
#include <stdio.h>
#include <inttypes.h>
#include <time.h>
int64_t millis()
{
struct timespec now;
timespec_get(&now, TIME_UTC);
return ((int64_t) now.tv_sec) * 1000 + ((int64_t) now.tv_nsec) / 1000000;
}
int main(void)
{
printf("Unix timestamp with millisecond precision: %" PRId64 "\n", millis());
}
Unlike clock, this function returns a Unix timestamp so it will correctly account for the time spent in blocking functions, such as sleep.
Modern processors are too fast to register the running time. Hence it may return zero. In this case, the time you started and ended is too small and therefore both the times are the same after round of.
How do I get the current time on Linux in milliseconds?
This can be achieved using the POSIX clock_gettime function.
In the current version of POSIX, gettimeofday is marked obsolete. This means it may be removed from a future version of the specification. Application writers are encouraged to use the clock_gettime function instead of gettimeofday.
Here is an example of how to use clock_gettime:
#define _POSIX_C_SOURCE 200809L
#include <inttypes.h>
#include <math.h>
#include <stdio.h>
#include <time.h>
void print_current_time_with_ms (void)
{
long ms; // Milliseconds
time_t s; // Seconds
struct timespec spec;
clock_gettime(CLOCK_REALTIME, &spec);
s = spec.tv_sec;
ms = round(spec.tv_nsec / 1.0e6); // Convert nanoseconds to milliseconds
if (ms > 999) {
s++;
ms = 0;
}
printf("Current time: %"PRIdMAX".%03ld seconds since the Epoch\n",
(intmax_t)s, ms);
}
If your goal is to measure elapsed time, and your system supports the "monotonic clock" option, then you should consider using CLOCK_MONOTONIC instead of CLOCK_REALTIME.
You have to do something like this:
struct timeval tv;
gettimeofday(&tv, NULL);
double time_in_mill =
(tv.tv_sec) * 1000 + (tv.tv_usec) / 1000 ; // convert tv_sec & tv_usec to millisecond
Following is the util function to get current timestamp in milliseconds:
#include <sys/time.h>
long long current_timestamp() {
struct timeval te;
gettimeofday(&te, NULL); // get current time
long long milliseconds = te.tv_sec*1000LL + te.tv_usec/1000; // calculate milliseconds
// printf("milliseconds: %lld\n", milliseconds);
return milliseconds;
}
About timezone:
gettimeofday() support to specify timezone,
I use NULL, which ignore the timezone, but you can specify a timezone, if need.
#Update - timezone
Since the long representation of time is not relevant to or effected by timezone itself, so setting tz param of gettimeofday() is not necessary, since it won't make any difference.
And, according to man page of gettimeofday(), the use of the timezone structure is obsolete, thus the tz argument should normally be specified as NULL, for details please check the man page.
Use gettimeofday() to get the time in seconds and microseconds. Combining and rounding to milliseconds is left as an exercise.
C11 timespec_get
It returns up to nanoseconds, rounded to the resolution of the implementation.
It is already implemented in Ubuntu 15.10. API looks the same as the POSIX clock_gettime.
#include <time.h>
struct timespec ts;
timespec_get(&ts, TIME_UTC);
struct timespec {
time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
More details here: https://stackoverflow.com/a/36095407/895245
This version need not math library and checked the return value of clock_gettime().
#include <time.h>
#include <stdlib.h>
#include <stdint.h>
/**
* #return milliseconds
*/
uint64_t get_now_time() {
struct timespec spec;
if (clock_gettime(1, &spec) == -1) { /* 1 is CLOCK_MONOTONIC */
abort();
}
return spec.tv_sec * 1000 + spec.tv_nsec / 1e6;
}
Derived from Dan Moulding's POSIX answer, this should work :
#include <time.h>
#include <math.h>
long millis(){
struct timespec _t;
clock_gettime(CLOCK_REALTIME, &_t);
return _t.tv_sec*1000 + lround(_t.tv_nsec/1e6);
}
Also as pointed out by David Guyon: compile with -lm
Jirka Justra's answer returns a long, which is usually 32 bits. The number of milliseconds since unix time 0 in 1970 requires more bits, so the data type
should be long long or unsigned long long, which is usually 64 bits. Also, as Kevin Thibedeau commented, rounding can be done without converting to floating point or using math.h.
#include <time.h>
long long millis () {
struct timespec t ;
clock_gettime ( CLOCK_REALTIME , & t ) ;
return t.tv_sec * 1000 + ( t.tv_nsec + 500000 ) / 1000000 ;
}
If you are trying to measure time less than 50 days, 32 bits is enough. Data type int is 32 bits or 64 bits on most computers, so the data type can be unsigned int.
I want to find out for how long (approximately) some block of code executes. Something like this:
startStopwatch();
// do some calculations
stopStopwatch();
printf("%lf", timeMesuredInSeconds);
How?
You can use the clock method in time.h
Example:
clock_t start = clock();
/*Do something*/
clock_t end = clock();
float seconds = (float)(end - start) / CLOCKS_PER_SEC;
You can use the time.h library, specifically the time and difftime functions:
/* difftime example */
#include <stdio.h>
#include <time.h>
int main ()
{
time_t start,end;
double dif;
time (&start);
// Do some calculation.
time (&end);
dif = difftime (end,start);
printf ("Your calculations took %.2lf seconds to run.\n", dif );
return 0;
}
(Example adapted from the difftime webpage linked above.)
Please note that this method can only give seconds worth of accuracy - time_t records the seconds since the UNIX epoch (Jan 1st, 1970).
Sometime it's needed to measure astronomical time rather than CPU time (especially this applicable on Linux):
#include <time.h>
double what_time_is_it()
{
struct timespec now;
clock_gettime(CLOCK_REALTIME, &now);
return now.tv_sec + now.tv_nsec*1e-9;
}
int main() {
double time = what_time_is_it();
printf("time taken %.6lf\n", what_time_is_it() - time);
return 0;
}
The standard C library provides the time function and it is useful if you only need to compare seconds. If you need millisecond precision, though, the most portable way is to call timespec_get. It can tell time up to nanosecond precision, if the system supports. Calling it, however, takes a bit more effort because it involves a struct. Here's a function that just converts the struct to a simple 64-bit integer.
#include <stdio.h>
#include <inttypes.h>
#include <time.h>
int64_t millis()
{
struct timespec now;
timespec_get(&now, TIME_UTC);
return ((int64_t) now.tv_sec) * 1000 + ((int64_t) now.tv_nsec) / 1000000;
}
int main(void)
{
printf("Unix timestamp with millisecond precision: %" PRId64 "\n", millis());
}
Unlike clock, this function returns a Unix timestamp so it will correctly account for the time spent in blocking functions, such as sleep. This is a useful property for benchmarking and implementing delays that take running time into account.
GetTickCount().
#include <windows.h>
void MeasureIt()
{
DWORD dwStartTime = GetTickCount();
DWORD dwElapsed;
DoSomethingThatYouWantToTime();
dwElapsed = GetTickCount() - dwStartTime;
printf("It took %d.%3d seconds to complete\n", dwElapsed/1000, dwElapsed - dwElapsed/1000);
}
I would use the QueryPerformanceCounter and QueryPerformanceFrequency functions of the Windows API. Call the former before and after the block and subtract (current − old) to get the number of "ticks" between the instances. Divide this by the value obtained by the latter function to get the duration in seconds.
For sake of completeness, there is more precise clock counter than GetTickCount() or clock() which gives you only 32-bit result that can overflow relatively quickly. It's QueryPerformanceCounter(). QueryPerformanceFrequency() gets clock frequency which is a divisor for two counters difference. Something like CLOCKS_PER_SEC in <time.h>.
#include <stdio.h>
#include <windows.h>
int main()
{
LARGE_INTEGER tu_freq, tu_start, tu_end;
__int64 t_ns;
QueryPerformanceFrequency(&tu_freq);
QueryPerformanceCounter(&tu_start);
/* do your stuff */
QueryPerformanceCounter(&tu_end);
t_ns = 1000000000ULL * (tu_end.QuadPart - tu_start.QuadPart) / tu_freq.QuadPart;
printf("dt = %g[s]; (%llu)[ns]\n", t_ns/(double)1e+9, t_ns);
return 0;
}
If you don't need fantastic resolution, you could use GetTickCount(): http://msdn.microsoft.com/en-us/library/ms724408(VS.85).aspx
(If it's for something other than your own simple diagnostics, then note that this number can wrap around, so you'll need to handle that with a little arithmetic).
QueryPerformanceCounter is another reasonable option. (It's also described on MSDN)