I am using SQL Server 2008 Reporting Services and set mode remotely. All is going fine and reports running on my machine. I am not using report viewer control, but switch to browser.
Problem is that when I access the report from any other system in browser by providing required url. I m getting the following premission error:
Server Error in /ReportServer Application. Access is denied:
Description: An error is occured while
accessing the resources required to
serve for this request. You might have
not premission to view the requested
resources. Error message: 401.3 : You
dont have the premission to view this
directory or page using the
creditinals you supplied.
I have go through all step of this article "http://msdn.microsoft.com/en-us/library/ms365170.aspx" and set remotly premession but after all changes no success and getting same error.
Please some one can tell me or provide step list, that how can I set the premession? that the report can run from other machine. Quick and detail response will
This link should give you some more steps to follow to set up the permissions as this sounds like a permissions error.
http://technet.microsoft.com/en-us/library/aa337491.aspx
Also .... does it prompt for a username and password when you visit the site from another machine? if not you may need to add the required authentication methods into IIS (just an idea)
Then create a local (or domain) account for people to use to browse reports and use the properties tab on the report server home page to add them as 'Browser' type members.
When you visit the reports site from another PC it should prompt for sign in details (may not on a domain - not sure), if it errors before showing the home page then it is a security config issue, once you get in you may have a bit more tinkering to do to get the reports to run, but you tend to get slightly more verbose descriptions then so its not too hard to figure out and it normally database security permissions related.
Best of luck.
CB
Related
I am trying to publish sharepoint2016 website including Power View reports which created by SQL server services service (SSRS). there is top level site and bi center as sub-site; both are working fine but problem is that when I try to view the report it said the error:
"the web application at [url] could not be found. verify that you have typed the url correctly. if the url should be serving existing content, the system administrator may need to add a new request url mapping to the intended application."I search about the error but It does not reach my target.
https://forums.asp.net/t/1970799.aspx?SQL+Reporting+Service+Runtime+Error+The+item+reports+Report1+cannot+be+found+rsItemNotFound+
note that the whole site is working fine in domain.
Please help...
Thanks...
Sorry for late guys...
i found that Power shell of SP cannot execute any command related to SSRS
it just need to reinstall SSRS service compatible with SP2016. then every thing is fine.
I have followed the relatively simple steps to migrating a Magento 2 site from my localhost to a live server. When I type in my new URL to see the site, I get an error screen with a message directing me to an error log.
From inside the error log I see the following error message:
a:4:{i:0;s:48:"SQLSTATE[HY000] [2002] No such file or directory";i:1;s:3133:"#0 /homepages/25/d336955856/htdocs/mfg_oldSite/product-catalog/lib/Zend/Db/Adapter/Pdo/Mysql.php(111): Zend_Db_Adapter_Pdo_Abstract->_connect()
I am not able to access either the regular public pages because of this error. I also get a 404 error when trying to access the admin page.
Any ideas? Any further info needed to make my question clear?
Check your host setting in /app/etc/local.xml
Try with changing it from "localhost" to "your server host"
have a look PDOException SQLSTATE[HY000] [2002] No such file or directory
EDIT
As per the whole discussion we have done. I am assuming that you have wrong credentials. this is why you are not able to connect to your DB.
have you checked your local.xml under app/etc or if you already done that then rename your local.xml and enter your website url on browser ,you will see installation panel, install your website again with right credentials i hope this work!!!
Hey please follow the following step it will remove the error
1) Rename the your local.xml file,
2) Delete all cache files form your system.
3) Run your site in your browser it will ask for the configuration steps.
4) Follow the steps and select the add database detail which you have updated in your live site.
It will setup all thing and the data will be same as it is.
I have downloaded Oracle Developer Days Database 12c virtualbox image. I can boot it and access the desktop. When I try to log in to Enterprise Manager (EM) Express using the URL http://127.0.0.1:8888/em I am asked to install Adobe Flash. I install it and get to the login screen.
If I try to login as SYSTEM I get the following error:
But when I try to log in as user SYS I get a strange error: Security token does not match. You must login again..
To me it looks like the credentials for SYS are OK, but there is something wrong with the user in the database. Is this correct and if so how can I fix it? Or is EM Express just not setup on the image?
This document from Oracles Metalink solves it. The solution contains 3 steps:
Make sure that XDB_WALLET is recreated successfully.
Make sure XDB is installed successfully and the appropriate roles, EM_EXPRESS_BASIC/ALL is applied.
Use IE 11.0.9600.16476 with compatibility view.
Mark Stewart's answer covers step 2.
The first two steps are not strictly necessary. It looks like they have already been applied to the image in my case. All I had to do was use a different browser. Opera, Chrome, and IE all worked, but Firefox didn't.
The fact that Oracle installs a browser that doesn't work with EM Express and that Adobe Flash is not installed when it's required is very strange.
Set up a personal user ID, grant DBA to it, and try granting EM_EXPRESS_ALL role to your user ID.
After making sure that a desired account has EM_EXPRESS_ALL granted I just accessed Enterprise Manager using New Private Window in Firefox.
In Microsoft Edge, no problem accessing Oracle 12c EM
In Microsoft IE 11, no problem accessing Oracle 12c EM
In Firefox : Security Token does not match
Found a solution for Firefox on Is there a way to make Firefox ignore invalid ssl-certificates?
Go to Tools > Options > Advanced "Tab"(?) > Encryption Tab
Click the "Validation" button, and uncheck the checkbox for checking validity
Be advised though that this is pretty unsecure as it leaves you wide open to accept any invalid certificate. I'd only do this if using the browser on an Intranet where the validity of the cert isn't a concern to you, or you aren't concerned in general.
I faced this because of the cookie data stored by Adobe Flash. Browsing on Private mode or Incognito did not help. Here are the steps to remove the stored data and start using EM on Chrome:
Go to Settings>Advanced>Content Settings>Cookies
Coose See all cookies and site data
In the cookies search box, key in the hostname used to access EM. I run EM on my localhost and hence filtered by localhost:
You can see Flash data being listed
Click on the item to expand and delete the item related to EM:
The same error still exists in 2019 on EM with Chrome Version 76.0.3809.87. My solution is to add EM URL to the "Allow" section in the Cookies section.
Use internet explorer to login to EM .
The other browser are not compatible with enterprise manager
This question may be a dublicate, but no recent post leads to a working answer for my case.
I have a Sharepoint 2013 running on a Windows Server 2012. Following issue appeared:
I made a new Site-Collection as wiki. Everything (links,...) works fine on the server but when I want to access the wiki from outside (not localhost) the server runs in a 404 Not found error.
http://localhost/sites/wiki/Pages/Home.aspx - works fine(localhost)
http://10.38.0.15/sites/wiki/Pages/Home.aspx - doesn't work.
I checked the IIS settings, all servers are up and running. The log file has no errors in it.
Does anyone know, how to solve this problem?
thx
Jürgen
The most common cause for this is that you don't have the IIS host header configured correctly. The 404 will appear because you are hitting a different IIS web site and not the one you intended to.
If you go into IIS Manager and click on "Sites" in the right hand pane there will be a column called bindings and a column called ID.
IIS will check in the order of ID for the first site that matches. Make sure the default site is stopped. If you see bindings that look like the following:
ID 1: Bindings: *:80
ID 2: Bindings: www.yoursite.com:80
www.othersite.com will match ID 1. Any other site that doesn't specify a port or https: will be directed to ID 2. You need to ensure that the site you are trying to access matches your bindings. The "www.yoursite.com" is added to the site via "New Web Application" in SharePoint. There is a field called Host: in Central Administration. This should match what you are typing from inside and outside the server. If you need the site to respond to multiple names, you need to extend the web application.
Assuming you used the default of claims authentication, here are the instructions for that:
http://technet.microsoft.com/en-us/library/gg276325.aspx
I am not sure if this is still required in Server 2012, but disabling the loopback check might also help, although this usually results in a 401, and repeated attempts to log in. Here are the instructions for that.
http://support.microsoft.com/kb/896861
Сheck the alternate access mapping in SharePoint administrator.
It should be something like this:
http://yourservername default
http://10.10.1.30:80 internet
http:// so on ..
I can't make Sitecore Analytics working. I have Sitecore 6.6.0 (rev. 121015) and installed Sitecore DMS.
1) when i go to Sitecore->Marketing Center i get error XML Parsing Error: no element found
2) when i go to Sitecore->Content Editor, choose element and press Analyze->Reports I get error You do not have permission to see any item reports
3) In Content Editor when press Analyze->Goals get Cannot use Analytics with a database that has no definition items error
4) in logs I see following:
"Exception: System.InvalidOperationException
Message: Cannot use Analytics with a database that has no settings"
5) If I change url that i get trying to open Marketing Center (changing Marketing%20Center.aspx to Marketing%20Center/default.aspx) I get Cannot use Analytics with a database that has no definition items error
6) I have in my Sitecore.Analytics.config this tag:
<setting name="Analytics.DefaultDefinitionDatabase" value="web" />
I tried to give access to analytics database from SQL Management Studio, but didn't help.
What could be the reason of this error, and how to solve it?
Your errors seem to suggest that the database is missing data. Did you use the database provided on this page, http://sdn.sitecore.net/Products/Sitecore%20V5/Sitecore%20CMS%206/Update/6_6_0_rev_121015.aspx ?
Go to the link above, scroll down to Download DMS 6.6.0 rev. 121015 for Sitecore CMS 6.6.0 rev.121015 and click the Download DMS 6.6.0 rev.121015 under SQL Server. Attach this database to your server and try again.
I haven't seen these errors, but it sounds to me like Sitecore is not able to access the Analytics database at all. You do have a connection string in ConnectionStrings.config named "analytics"? Try using the sa account just to make sure it's not a permissions issue. Don't forget to change it back from sa either way.
(caveat: I haven't used DMS yet, just OMS... it's possible I am way behind the times)
Publish your site (to web). You might be trying to analyze data that isn't live.
I just erased my previous answer as that was a consequence of what was wrong, but not the actual cause...
In the Analytics code, the Marketing Center node is requested from the current database. If it cannot find that item (which IS in the master database), you get the error.
But the code will NOT find the marketing center item if the security settings prevent the anonymous user read access...
That is where the error occured for me, when I was an anonymous user... And effectively, when looking at the security settings for the Marketing Center Item I found that inheritance had been blocked, hence preventing read access for the anonymous user...
Another reason this error sometimes occurs is when you have a production environment where there is no access to the master database.
Since the Analytics code uses the "master" database as the default definition database unless otherwise specified in the config settings, you could add the following to analytics.config:
<setting name="Analytics.DefaultDefinitionDatabase" value="web" />
That way, it will fallback to the web database in case of a production environment without master database.
Hope this helps...
Erwin
The issue is due to Sitecore not being able to read the definition items in the master/web database (depending on the Analytics.DefaultDefinitionDatabase setting).
The items it is looking for are:
/sitecore/system/Marketing Control Panel
/sitecore/system/Settings/Analytics
When the request is running, the user is default\Anonymous. Using Access Viewer, make sure there are no security settings disabling read access to these items. This includes parent items that would have a trickle-down effect.